CNC Slant Lathe Turning Center Swiss Type Sy800 with OEM/ODM

Product Description

Product Description
1.Adopt direct drive synchronous electric spindle device: magnetic ring incremental encoder (sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds. 1.Effectively eliminate spindle vibration, and the nose deflection accuracy is within 0.002MM. Improve the surface finish of the workpiece, 2.adopt a rear-mounted rotor, which makes installation and maintenance faster, 3.the spindle motor is equipped with a cooling system to suppress the influence of thermal displacement and ensure a constant operating temperature of the spindle. The spindle system has undergone strict dynamic balance testing. The good accuracy retention, high rigidity and high efficiency enable the whole machine to not only complete finishing, but also perform rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high smoothness. product.
2. World-class high-rigidity overall design servo turret. Equipped with a high-precision clutch to ensure its positioning accuracy and repeatable positioning accuracy. It is equipped with a servo motor to drive the cutterhead to rotate for bi-directional or arbitrary tool selection. The hydraulic principle is used to loosen and clamp the clutch, and the proximity switch feedbacks the clutch action signal to quickly and accurately achieve the tool change action.
3. The machine tool is equipped with THK linear guides and ball screws. The heat-treated and precision-ground ball screws can ensure the best accuracy and durability. Each axis adopts a direct transfer axis structure and a double-anchor pre-relay method to prevent thermal changes. The bit quantity will be reduced to the minimum, greatly improving the processing accuracy. The high-rigidity, large-sized, heavy-duty linear slide rails maintain intact accuracy when the machine is subjected to impact, and the displacement is smooth and low-noise, which can extend the service life.
4. This machine provides users with a complete hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components to greatly reduce the failure rate. The hydraulic and lubrication systems are designed to be simple and reliable. The machine tool adopts centralized quantitative automatic lubrication.
5. Programmable hydraulic tailstock and high-rigidity structure of the integral tailstock can eliminate vibration and improve stability. It can be controlled by programmable or manual buttons, and the sleeve telescopicity is realized by hydraulic cylinder, which is convenient, fast and reliable.
6. It adopts Taiwan rotary chuck cylinder and optional automatic chip removal device, which can greatly reduce the labor intensity of the operator and achieve safe and efficient production. The above functional components can be programmed and controlled, and various types of equipment can be designed and installed according to the special requirements of the user. Special fixture. Product Parameters

	Name	Unit	SY800
Travel	Max. upward rotation of bed surface	mm	Φ700
	Max. processing diameter	mm	Φ650
	Max. processing diameter on tool holder	mm	Φ350
	Max. processing length	mm	790
Spindle Cylinder Chuck	Spindle nose	type	A2-6
	Spindle maximum speed	rpm	4000
	Cylinder/Chuck	lnch	10″/8″
	Spindle bore diameter	mm	Φ79
	Bar diameter	mm	Φ65
	Spindle motor power	kw	15/18
	Spindle motor torque (1:1.4)	Nm	134-196
X/Z axis feed	X/Z axis limit travel	mm	350/960
	X/Z axis rail specifications	spes	45 pin roller
	X/Z axis screw specifications	mm	4012
	X/Z axis motor power	kw	2.9
	positioning accuracy	mm	±0.005
	Repeatability	mm	±0.003
	X/Z axis rapid movement	m/min	24/24
Servo Turret	Tool station	pcs	12T
	Outside diameter tool holder specifications	mm	25X25
	Inner diameter tool holder specifications	mm	Ф40
	Adjacent tool change time	sec	0.2
	Positioning accuracy	/	±2"
	Repeatability	/	±1"
Tail stock	Hydraulic tailstock	/	Hydraulic tail seat
	Maximum travel of tailstock	mm	630
	Tailstock sleeve tapered hole	type	Mos 5#
	Tailstock sleeve diameter	mm	Ф100
	Sleeve stroke	mm	100
Mechanical Size	Overall dimensions (length x width x height) approx.	mm	3500*2110*2100
	Weight (approximately)	kg	6700
Other	Cutting fluid tank volume	L	250
	Cooling water pump power	W	750
	Hydraulic unit box volume	L	40
	Hydraulic oil pump motor power	kw	1.5
	Lubricating oil tank volume	L	2
	Automatic lubrication pump motor power	W	50

Products Configurations
Company Profile
Quality Control
Our Advantages
FAQ
Q1:How can l choose the most suitable machines?
A: Please tell me your specifications, and we will help you select the best model, or you can choose the exact model yourself. Alternatively, you can send us the product drawings, and we will recommend the most suitable machines for your needs.
Q2: What are the main products of your company?
A: We specialize in all kinds of machines, such as CNC Lathe Machine , CNC Milling Machine, CNC Turning Machine, Vertical Machining Center, Horizontal Machining Center, Lathe Machines, Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
A: We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. You are warmly welcome to visit us.
Q4. How do you transport it?
A: Provide Transportation Solution DDP/CIF/FOB/FCA
Q5: What are the Payment Terms?
A: T/T, 30% initial payment when ordering, 70% balance payment before shipment
Q6:What's the OMQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
We want to know:
1. We strongly suggest you tell us the size, and material of your workpiece for our evaluation, if possible, better to send us a workpiece drawing so that we can recommend you the most suitable model.
2. If need a CIF Price, please kindly tell us the port of destination.

---

>> Chinese Water Excavator for Sale / Amphibiou Excavator
>> Bus Front Windshield Glass for Yutong Zk6128h for Ghana
>> Omron thermostat E5CSL-RTC
>> HOPERF 434/868/915MHz SoC RF Transceiver Module HM-380F17
>> Global Best-Seller Latest Touch Screen Bathroom Cabinet with CE for House Use Quality Inspection Report
>> New 10" Different Style Toddler Baby PVC Mini Doll with Spray Animal Toy
>> 55mm Throttle Body Throttle Valve Assembly 8S4Z9E926A 337-02205 2.0L Fits 10-13 TRANSIT CONNECT 385104
>> New Metal Tin Neutral Solid Brands of Lanolin Wax Shoe Polish Cleanse
>> Colorful eva foam puzzle mat play mats 60x60
>> Estop Duplex Milling Machine Th-430nc CNC Twin Head Milling Machine
>> Chinese Dehydrated Potato Cubes Potato Flakes
>> Middle Speed Rotary 24/36 Carrier/Spindle Wire Braiding Machine for Rubber Hose or Flexible Metal Hose
>> New 16m Awp Xga16 Small Articulated Boom Laerial Work Platform Price Sales
>> Century Star China Plastic Stadium Chair Factory High Quality Electric Telescopic Grandstand Seating System Bleachers Seat Moveable Grandstand Stadium Chair
>> Multi Spindle Multi Holes Drilling Tapping Machine for Retainer of Fuel Tank Breather Tube
>> Video Wall P 3.9 P3.91 Screen Indoor Rental Full Color 3.9mm Pixel P3.9 Outdoor LED Display
>> upgrade GLE look model on taillamp taillight rearlamp rearlight for mercedes BENZ ML CLASS W166 tail lamp tail light 2012-2015
>> SANY HGY18 18m Mobile Concrete Placing Boom
>> 300X600mm White Color Interior Ceramic Wall Tile for Kitchen
>> Fiber Laser Welding Machine