| Product Specification and Size, Standard Specification | |||
| Alloy Designation (For Reference) | |||
| Comparison of Alloy Designations for Aluminum flat Products | |||
| Alloy Series | Chinese Standard | American Standard | European Standard |
| 1xxx Series | 1050 | - | - |
| 1060 | 1060 | - | |
| 1100 | 1100 | - | |
| 3xxx Series | 3003 | 3003 | EN AW-3003 |
| 3004 | 3004 | EN AW-3004 | |
| 3005 | 3005 | EN AW-3005 | |
| 3105 | 3105 | EN AW-3105 | |
| 5xxx Series | 5005 | 5005 | EN AW-5005 |
| 5052 | 5052 | EN AW-5052 | |
| - | 5754 | EN AW-5754 | |
| Temper Designation(For Reference) | |||
| Temper | Definition | ||
| O | Annealed | ||
| F | As fabricated (no mechanical property limits specified) | ||
| H12 | Strain Hardened, 1/4 Hard | ||
| H14 | Strain Hardened, 1/2 Hard | ||
| H16 | Strain Hardened, 3/4 Hard | ||
| H18 | Strain Hardened, Full Hard | ||
| H22 | Strain Hardened and Partially Annealed, 1/4 Hard | ||
| H24 | Strain Hardened and Partially Annealed, 1/2 Hard | ||
| H26 | Strain Hardened and Partially Annealed, 3/4 Hard | ||
| H28 | Strain Hardened and Partially Annealed, Full Hard | ||
| H32 | Strain Hardened and Stabilized, 1/4 Hard | ||
| H34 | Strain Hardened and Stabilized, 1/2 Hard | ||
| H36 | Strain Hardened and Stabilized, 3/4 Hard | ||
| H38 | Strain Hardened and Stabilized, Full Hard | ||
| Available Size Range | |||
| Dimension | Range | ||
| Thickness | 0.3-6.0mm | ||
| Width | 30-1850mm | ||
| * Surface Finish: Mill finish, unless otherwise specified * Surface Protection: Paper interleaved, PE/PVC filming (if specified) | |||
