Bayrich Conveyor belt ply separator /slitting machine ★Detail: The PO130 Conveyor belt ply separator is used to separate between the plies of a conveyor belt.This cutting action is often required in preparation before splicing a PU PVC belt thickness more than 4mm ,this machine will be needed to help joint the belt with more strength.It is an ecnomic choise compare with PN130 conveyor belt Ply separator. ★Features 1.Good performation on normal conveyor belt 2.Economic practicality 3.Belts can be divided into two layers,three layers etc. 4.Layered thickness accuracy can reach 1.5mm 5.Hard alloy steel layering blade,hard alloy steel knife controller. 6.Positive inversion control box switch to control positive inversion control box 7.Easy operation.The foot switch is below with positive and negative ratary knobs on it. ★Technical Datasheet
