Retech Plastic Pet HDPE Bottle Flakes PP LLDPE LDPE Woven Bags Washing Recycling Pelletizing Machine

Product Description

Retech Plastic PET HDPE Bottle Flakes PP LLDPE LDPE Woven Bags Washing Recycling Pelletizing Machine

Product Description
our advantages:
1. Recycled material: Total impurity content ≤320PPM, Moisture content≤2%. 2. Production Capacity: 300-3500Kg/h3. Plan design according to Customers' requirements.4. Simple design, user-friendly operation.5. Lower investment cost for a high quality and durable machine.6. Low energy consumption, High output capacity.7. Usual delivery time: 60 days.8. Engineers are available to do commissioning work abroad.

Retech Plastic PET bottle Cocacola bottle washing recycling line is used to recycle post-consumer PET bottles, water bottles, cola bottles, PET sheet and PET packing containers.
The key point of PET recycling system is the rate of removing the impurities.The higher purity PET flakes will improve the end product and lower the manufacturing cost of next processing.We could design different PET recycling solutions basis on the requirement of standards on final flakes.
PET washing line/PET bottle washing line/PET flake washing line (including crushing, washing, drying)
This line consist of plastic select device, crusher, washing tank, separate, dryer and packing. This is the whole complete line on our project.
Consideration for our customer ,we will design different line for our customer:
1, We provide different capacity for our customer: 200kg/h, 300kg/h, 500kg/h, 1000kg/h,1500kg/h,2000kg/h,2200kg/h,2500kg/h.
2, According to your material, you may choose different device.
3, According to your country condition, you may choose full automatic line or semi-automatic line.
4, Our customer may purchase device based on his own condition.
5, Based on your workshop condition, our design always matched to your workshop mostly.
Machine List Components of Pet Bottle Washing Line:
Label Remover machine---Sorting system---PET Crusher machine---Flakes Floating washing tank---Hot Washing system,---Frication washing system---dewatering machinery and fin dust label separator machine---hot air drying system and the Packing system
Nowadays, our PET washing line have been exported to many countries & regions, e. G. Latin-America, Mideast, Russia & MID-Asia, Africa, etc.

Product capacity	500kg /h	1000kg /h	1500kg /h
Workshop(L*W*H)	42m *10m*6m	70m *12m*6m	75m *15m*6m
Needed worker	5-6persons	7-8persons	10-12persons
Water supply (recycle use)	3-5ton/h	7-10ton/h	10-15ton/h
Final product quality	Moisture: Max 1% Bulk density: 0.3G/CM 3 Particle size: 10-18mm Metal content: Max. 20ppm Floatable contamination: Less than 200ppm Total impurity: 100-320ppm

Detailed Photos

Basically the standard process for PET bottle recycling line design as below:
De-baling(bale opener)------ Label Scrapping(lable remover)-------- Persorting------Bottle Pre-washing ------ Manual Sorting and Metal Detecting-----Wet Grinding(crusher)-------Gravity Separation(floating washer)-------Chemical Washing for PET Flakes(Hot washer)-------High speed friction washer ------- Floating washing tank ------- Rinsing(clean water spraying)--------Drying--------Packing/storage hopper
Belt conveyor
Function: to transport unstrapped bale into Opener, which is strong enough for heavy bales

Bale opener
Function:to make the bottle bale separated

Mechanical label separator
Function: to remove the labels from the bottles, rate> 98 %( whole bottle), >95% (pressed bottle)
Manual sorting
Function:separating the color bottle, other material bottle, strong label bottles by people manual

Metal detector
Function:checking out all kinds of metals

Crusher
Function:crush the bottles to be flakes

Screw conveyor
Function:transporting the PET flakes to be next step

High speed friction washer
Function:remove out the strong dirties attached on the surface of the bottle flaked by friction of flakes hitting to the screen and each other

Floating washer
Function: immersing and rinsing the PET flakes and separating out the PET caps automatically

Hot washer
Function:wash out the strong dirties, dissolving the oil, glue on the surface of the bottle flakes
Dewatering machine
Function:removing water by powerful centrifugal to ensure the flakes moisture ≤1%
Label separator by air
Function:to remove the residual label tiny flakes and fines of material
Electric elements
Function:electric unit to controlling the whole line running and stop
Product Parameters

Capacity	1000kg/h	2000 kg/h	3000 kg/h
Workshop(M*M*M)	42 (L)×10(W)×6(H)	55(L)×15(W)×6(H)	70(L)×18(W)×6(H)
Ancillary staff	4-6Persons	6-8 Persons	8-12 Persons
Installation power	300KW	400KW	450KW
Water Consumption:	6-8Ton/h	8-10Ton/h	10-15 Ton/h
Final product	Moisture: max 1% Bulk density: 0.3G/CM3 Particle size: 14-18mm Metal content: max.20ppm Floatable contamination: less than 200ppm Total impurity: 320ppm

Certifications
Service
1.Pre-sale support
Retech Machinery consists of experienced specialists, we will offer a suitable solution according client's requirement in time.
2. After-sale service
Retech 's skilled technicians are available to assist with onsite installation, commissioning & training on request. This will enable customers to optimize the performance of their new plant. Customers will be briefed on all aspects relating to operation and maintenance by a Retech technician. Dimensional drawings together with service requirements will be provided prior to delivery of the equipment. This will allow the customer to prepare the site and allow them to commence production in a timely fashion.
Retech holds a adequately inventory of spare parts and their efficient service personnel will ensure that any required part will be dispatched without delay. Delivery of the spare parts may be by air, sea or courier depending on the urgency of the situation. Customers are encouraged to hold their own critical spare parts such as granulator blades and screens to ensure optimal machine condition and performance.
3. Technical support
Retech plastic washing and recycling machinery provides enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.

Company Profile

Exhibitions

---

>> Full Auto Line 4 Gallon Water Bottle Making Machines Blow Molding Machine
>> Portable Light Tower Trailer Frame Chassis Mobile Solar Lighting Tower Pole
>> Hot Sell Exchange Table OEM Industrial Laser Cutting Machine for Carbon Steel/Stainless Steel/Aluminium Alloy/Copper/Brass
>> Ultrasonic Sewing Machine for Polypropylene Woven Bag Making Machine
>> HC-M017 Hot Sale stainless steel patient table electric examination bed / medical couch
>> Cellphone Fast Charging Cord USB Data Cable Line
>> Four in One Wireless Charger for Mobile Phone Earphone and iWatch
>> Milling Machine CNC Vertical Machining Center Vmc Series
>> Manufacturer Custom Color Sink Water Taps Mixer Stainless Steel 304 Basin Faucet
>> High Speed Two Layer 4 Line Cold Cutting Shopping Market Packing Flat Bag Making Machine
>> DELL Single Hot-Plug Power Supply 495W
>> Horizontal Turret Type 12 Spindle CNC Drilling and Tapping Machining Center, Milling Groove Composite Machine for Faucet
>> Steel Shaving Razor Rose Gold Male Gender and No Disposable Double Edge Single Blade Brass 3-5 Workday Offer
>> Electro Hydraulic Synchronous CNC Press Brake Kcn-40032, Da69t, 6+1 Axes
>> Taijia portable iron detector concrete reinforced steel bar detector metal detector for concrete
>> Slim Size Two Sides Emitting LED Linear Light with 22*85mm Profile
>> Factory Price Custom Wooden/Wood Red Wine Box for 6 Bottles Packing/Storage/Packaging
>> Drop Wire and Dropper for Weaving Machine
>> Ink Jet Printer, Inkjet Printer (V160)
>> Vertical Medium Small Food Grade Colloid Mill for Food Industry