Powerful Polyurea Protective Coating for Anticorrossion/Antiabration/Antiimpact/Antiwater

Product Description

Eco Freindly Polyurea coating for Antiabrasion, Anticorrossion, Antiwater
Descriptions:
a 100% solid, fast set, spray-applied, two component aromatic polyurea elastomer. The system consists of the A component, a quasi-prepolymer rich of free NCO, and the B component, a mixture of polyetheramine, amine extenders and other additives. The unique polyurea chemistry allows this material to be tolerant of moisture and lower temperatures during application. This means that high humidity and hidden moisture in concrete has minimal effect on the application of this product.

Fast cure, short downtime but non-sagging. Moisture and temperature insensitivity during processing. High thermal stability. 100% solid, Non-VOC and odorless, environmental friendly. Extraordinary physical properties. Excellent adhesion to primed concrete. Seamless, flexible and waterproof. High elongation properties, resistance to freeze-thaw. Superior weather resistance. No chalking and fading in long-term outdoor use. Application
Designed for use as a smooth seamless waterproof lining coating system for interior and a roof and wall coating system for exterior applications. Ideally suitable for use in areas including:
Metal, concrete, wood and foam roofing.
Mechanical rooms. Cold storage areas. Basing and reservoirs. Marine bridges. Tunnels. Underground engineering. Cooling towers of power plants. Aquarium lining. Pond lining. Water and waste water linings. The polyurea elastomer coating now has many advantages over the earlier developed polyurethane, polyurethane \ polyurea technology:
1. Curing speed, in the vertical plane will not produce sagging, cross-linking speed of 2-6 s, 6-9s can reach the level of non-stick hand, 30s can walk on it. 30min to put into use.
2 is not sensitive to temperature and humidity, high humidity and low temperature on the polyurea elastomer coating performance is quite small.
3 100% solid content, two-component coating, single coating system, spray coating can reach a fairly thick 2000UM above, without solvent, zero VOC.
4. Outstanding physical properties, tensile strength 14-21MPA, stretching 2% - 520% between.
5, heat resistance, thermal stability of 177 degrees, (350T)
6. Compatibility with the pigment is very good, you can adjust the color.
7. Adjustable formula, from soft to hard polymer coating.
8. Can be enhanced, in the spraying process can be added to enhance the glass fiber.
Technical data

No.	Item	Index
		I	II
1	Color	Optional
2	Solid	100%
3	Gel time	10 seconds
4	Mixing ratio(by volume)	1:1
5	Flash point	>200°C
6	Recommended spreading thickness	1-2mm
7	Drying time	Temperature, humidity and film thickness dependent

Performance characteristics

No.	Item	Specification
1	Flash point	>200°C
2	Tensile strength	15Mpa	21Mpa
3	Tensile elongation	350%	520%
4	Tear strength	59 KN/m	78 KN/m
5	Impact resistance	1.5Kg·m	1.5Kg·m
6	Adhesion	2.6Mpa	2.6Mpa
7	Hardness	Shore A85-95	Shore A80-90
8	Water impermeability, 0.4Mpa×2h	Impermeable
9	Specific gravity	1.02g/cm3	1.02g/cm3
10	Service temperature	-50°C-150°C

Packing
Part A: 220kg /drum
Part B: 200kg/drum
Storage condition
A component is easily affected by moisture must be protected from moisture contamination. Containers are factory sealed with an inert gas to prevent contamination. Keep all containers tightly closed during storage. For further storage after opening, containers must be purged with nitrogen gas or dry air and tightly sealed from moisture. Store drums and pails in a cold, dry and ventilated location between 15-40°C. Keep away from rain and sunshine. Keep away from fire and heat source. Installation instruction
a. Surface preparation
Surface must be properly prepared. Remove all oil, dust, grease, dirt etc to ensure adequate adhesion.
b. Application condition
Temperature:
Air and surface: -20°C-40°C
Relative humidity: ≤90%
USED IN ANY PLACES FOR ANTICORROSSION, ANTIABRASION, ANTIWATER,ANTISLIP, LOWER NOISES!
HOW TO APPLY POLYUREA?
Highly-skilled professional contractors are required for successful projects.
WHEN COATING WITH POLYUREA?
There are two rapidly reacting and curing components that need the right conditions in order to achieve the desired outcome.
Special two-component spraying equipment required. Typically hot-sprayed at 70-85°C. Due to the curing time of a few seconds, there is no room for errors. Personal protective equipment necessary. With Us as your polyurea supplier, you receive: Complete polyurea system from sealers, primers and hardeners to topcoats Local technical service, support and practical training Partner with comprehensive corrosion protection knowledge gained through 70 years As a polyurea manufacturer, we provide a full range of services to help our customers with polyurea, from the product, chemistry and application training and professional technical support.
We can support you with any questions: selecting the right polyurea system for your application, safety, equipment, troubleshooting, and maintenance.
Our technical service professionals have vast experience in industrial painting and they are happy to help you with polyurea and its special requirements.

---

>> Holographic Heat Laminate Overlay for PVC ID Cards
>> Tyre Valve Extension Twin Wheel Truck Van Lorry Transit Adaptor And Clamps
>> DS200PCCAG1ABB GE Spot prompt price consultation shall prevail
>> IP/WiFi HD Touch Screen Intercom System Smart Video Door Phone
>> Plastic Film Craft Paper Aluminum Foil Dry Laminating Machine for Food Packaging
>> Asiahorse Fs-9001 120mm Triple Light Silent 20 LED Light Addressable RGB Fan 5V PWM Controller PC Case Fans
>> High efficiency car ignition coil for Infiniti i30 i35 Maxima KH-2201 22448-2Y006
>> AD207 7" Screen 8 LEDs 3D Image 100X 2MP Andonstar Digital Microscope Rotation w/ Adjustable Bracket
>> Plastic Injection Food Box Mould
>> (WLD9000) Cabina De Pintura Car Spray Booth Made in China Spraying Oven Painting Cabinet Baking Oven Painting Cabin Paint Chamber Room Bus Paint Booth
>> Blow Moulding Machine/Blow Molding Machine/Die/Head/Die Head/Three Head/Two Layer/Double Layer/2liter-Double Layer- Three Die Head
>> Hot Selling Removable Tiny Handle Double Edge Blade Metal Safety Shaving Razor
>> Patio exterior metal gate popular handmade grill design single leaf privacy frosted glass entrance wrought iron door
>> B Series Universal Pulverizer with Dust Collector
>> Module spare parts MMS6210
>> Photoelectric Smoke Detector Fire Alarm
>> Bamboo Cheese Board and Knife Set Large Charcuterie Boards Set & Cheese Platter for Unique House Warming Gifts
>> F650 Series Cast Steel Check Valve
>> Mini Power Tiller Single-Row Corn Harvester Handheld Gasoline/Diesel Engine Corn Harvesting Machine
>> T5 lamp clip, T5 aluminium lamp clip, LED lamp clip stainless steel