The Kr18 steel sheet is a structural profile and roof system type SSR (Standing Seam Roof) and concealed fixing based on clips. The KR-18 steel sheet reduces the risk of leaks, since drilling the sheet to place it is not necessary. This engargolada sheet is very light, which facilitates transportation and installation maneuvers. Their manufacture can be done on the construction site and they can be made to the required length, they are usually manufactured in a single piece from gutter to ridge. KR18 corrugated sheet is used in constructions that require a low slope of up to 2%.
| Material:PPGI,Galvanized | Power plant:gasoline diesel engine 15HP |
| Feeding width : 610mm | Battery:12 Volt DC*2 |
| Effective width: 457mm | Drive System: All hydraulic pump with engine |
| Thickness: 0.5-0.8mm | Material of rollers: Good 45# steel, rigid chrome coated |
| Working speed:10-13 m/min | Material of roller shafts: 45# steel, quenched HRC 58-62 |
| Material of cutting blade: Cr12 steel | Controlling: Handle controller |
| Forming station: 9-11 rollers coated with hard chromium. | Transmission:Chain Gear |
| Cutting:Hydraulic system | Size: 4*1.2*1.3m |
