| US$1,400.00-1,600.00 | 1 set (MOQ) |
| Model | AT520/AT750 | |
| LATHE | Distance between centers | 500mm/750(20"/29-1/2") |
| Dial calibration on crossfeed | 0.05mm(0.002") | |
| Dial calibration on leadscrew | 0.05mm(0.002") | |
| Headstock taper | MT4 | |
| Lathe chuck mount | Bolt-on | |
| Spindle bore | 26mm(1") | |
| Spindle speeds | 6 steps (160-1600rpm) | |
| Swing over bed | 300mm(12") | |
| Swing over work table | 170mm(6-3/4") | |
| Thread pitch on processing | 0.5-3mm | |
| Thread kinds on prodessing | 14(20) | |
| Tailstock taper | MT3 | |
| Z-axis working travel | 355mm(14") | |
| X-axis working travel | 200mm(8-1/2") | |
| Power feed(X-axis) | Yes | |
| Power feed(Y-axis) | Yes | |
| Table size | 150x425mm(5-7/8"x16-3/4") | |
| MILL/ DRILL | Head rotation | 360° |
| Head travel | 80mm(3") | |
| Spindle center to support column | 310mm(12-1/8") | |
| Spindle to table distance(Min-Max) | 240-32mm(9-1/2"-12-5/3") | |
| Spindle speeds | 9 steps(315-2000rpm) | |
| Spindle taper | MT3 | |
| Tool size limits | 25mm(1") | |
| OTHERS | Motor power | 550w(3/4HP) |
| Packing size | 1170(1470)x580x980mm |
