2023 Torch High Power Laser Conveyor Vacuum Furnace V8l with Low Price in China

Product Description

2023 Torch High Power Laser Conveyor Vacuum Furnace V8l with Low Price in China
Technical Data of Vacuum Reflow Soldering System V8: 1. Significantly reduce the welding bubbles in the solder, making the void rate as low as 1-2%.
2. Improve the electrical performance of the product and the welding joints, effectively improving the reliability of the welding point and the welding quality.
3. It can be used for double-sided welding of PCB, suitable for mass production, and can be continuously put into the production line. The production cycle is controlled at an average of 30-60S.
4. The degree of vacuum, vacuum holding time, deflation time, vacuum rate, etc. can be set freely.
5. The circuit board with aluminum heat sink can be welded.
6. Low power consumption and high heat insulation design based on the concept of environmental protection. The case temperature does not exceed 40 degrees.
7. High-efficiency and large-capacity flux recovery device.
8. Use integrated oxygen sensor technology to ensure precise control of oxygen content, and real-time/continuous monitoring of residual oxygen content in the furnace.
9. The equipment can be used as an ordinary nitrogen or air furnace at the same time.
Technical Data of Vacuum Furnace V8L

(Required)	Technical specifications	model: V8L
		Actual index value
Actual index value	length	MAX 400mm
	width	MAX 450mm
	height	MAX 30mm
Performance parameter	heating method	Hot air heating
	Speed adjustable range	≥20cm/min
	Max. heating temperature	MAX 350ºC
	heating temperature	<200ppm
	Heating rate range	1-3ºC/s
	Heating rate range	1-3ºC/s
	The temperature of the baked product	80ºC
	Heating rate range	±4ºC
	Number of equipment temperature zones (heating)	8+1
	Number of equipment temperature zones (Cooling)	2
	Warm-up time (heating time)	According to the specific requirements of the process
	Oil pump meets the demand of clean room/class 10,000	Class 10,000
	Class 10,000	≤2mbar
Dimension/Weight	Dimension (m)	6.3m(L)*1.55m(L)*1.7m(H)
	Weight (Kg)	1600kg
Power	Voltage	380V
	Frequency	50Hz
	Power Consumption	Maximum power 32KW Average power 10KW
	UPS	Optional
Forming Gas/N2	Connector Diameter	10mm
	Pressure	0.3MPa-0.6MPa
	Nitrogen consumption	300L/min
	Flow Rate	80psi(0.5Mpa, gas flow rate 80L/M)
Compressed Air	Connector Diameter	10mm
Pressure	0.3MPa-0.6MPa
Flow Rate	80psi(0.5Mpa, gas flow rate 80L/M)
Exhaust	Exhaust Flow	MAX 8L/s
Cooling Water	Connector Diameter	10mm
	Flow Rate	Instantaneous maximum 18L/s
Instantaneous maximum	Delivery cycle/week	60 days
	Can the delivery be delayed when the on-site installation conditions are not met	Yes
Technical support, training requirements	The response time for troubleshooting at the site is within 48 hours, and training is included.	Arrive at the site for 24 hours, and installation training is included.

---

>> 9m 11m 12m 14m 16m 18m 20m 24m 26m Mewp Hydraulic Man Mobile Bucket Aerial Work Towable Articulated Telescopic Cherry Picker Trailer Mounted Spider Boom Lift
>> Efficient 10t Webbing Sling for Industrial Load Lifting
>> HC-PQ13 Mitsubishi Brand New AC Servo Modular 0.9A Input Power
>> Hot sale Digital Rebar corrosion detector Rebar rust tester
>> Factory Wholesale Aluminum Free Double-acting Baking Powder With Low Price
>> Powerful Down The Hole Drilling Rig Rock Drilling
>> Belt Sorting Machine for Garlic Intelligent CCD Garlic 304 Stainless Steel Color Sorter
>> Macaron Maker Wire Cutting Cookies Droppingbiscuits Commerical High Capital Cookies and Biscuit Making Machine
>> 3 Phase NEMA42 110mm 42CF17048-1000 Closed Loop Step/Stepping/Stepper Motor Kit 110CF Easy Servo Motor and Driver
>> High Quanlity and Abundant Colorful Motorcycle Helmets
>> Ns-Wy02 Displacement Sensor/Lvdt/ Linear Position Sensor/ Position Measurement/Injection Machine/Digital Output/Output 4~20mA/Ce/RoHS
>> T3 Series Ultrasonic Bulk Water Meter Residential Digital Ultrasonic Flow Meter Urban Water Use
>> Hot Selling Fish Meal Making Machine Fishmeal Production Line Fishmeal Processing Plant
>> high quality aftermarket the full LED headlamp headlight plug and play for audi A3 head lamp head light 2017-2020
>> Magnetic Nb-Iot Water Meter Without Valve
>> High Quality Custom Non-Standared Parts CNC Machining Parts Precision Machined Metal Components
>> 32 spindles single horse head high speed braiding machine, multi-specification rope braiding machine high speed rope braiding machine
>> Coal charcoal briquette making machine factory hot sale high quality coal dust briquetting press machine
>> 2023 Hot Sales Horizontal GM2015 CNC Gantry Grinding Machine
>> 4 in 1 Electric Screwdriver Cordless, 4V Max 1500mAh Li-ion Cordless Screwdriver Rechargeable, with 4 Multi-Function Attachment