Product Details
Product Description
Product Description
STA-125 Thermal Analysis Instrument Introduction
The Simultaneous Thermal Analyzer (STA) combines Thermogravimetric Analysis (TG) with Differential Thermal Analysis (DTA) or Differential Scanning Calorimetry (DSC) to obtain thermogravimetric and differential thermal information simultaneously by using the same sample in the same measurement. The STA is equipped with various heating furnaces and accessories with different characteristics, covering the vast majority of materials, including plastics, rubber, synthetic resins, fibers, coatings, oils, ceramics, glass, cement, refractory materials, metals and alloys, fuels, explosives, pharmaceuticals, food, etc.
STA-125 Thermal Analysis Instrument Features
1. Can automatically control the furnace up/down with accurate positioning, can ensure data reproducibility.
2. By heat flow DSC data gathering way to get the energy and temperature curves.
3. Operators can use standard samples to calibrate the accuracy of temperature, energy, and thermogravimetric.
4. Atmosphere control system uses the Mass Flow Controller (MFC); the triode voltage regulator and steady flow gas can be automatically switched in the process of experiment with high precision, good repeatability and quick response.
5. From the microscale to largescale samples can be tested (up to 5g); Can meet the test requirements of various samples under different conditions.
6. All testing procedures be completed automatically, the software can get data like DTA (differential thermal analysis), TG (thermal gravimetric), DTG (derivative thermogravimetric), DDTG, DTA peak area, thermal enthalpy, kinetic parameter, glass transition temperature, specific heat, activation energy and so on.
7. Can take screenshots during testing at any moment, will automatically change the range according to the output signal.
8. The large-screen LCD displays the status and data of the instrument in real time. There are two sets of thermocouples. One set of thermocouples displays the furnace temperature in real time (whether the heating furnace is working or not) and the other set of thermocouples displays the sample temperature during operation.
9. According to the calculation formulas or calculation methods provided by users, we can provide corresponding calculation software in a timely manner.
10. Self-developed constant temperature controller; constant temperature gas chromatography and mass spectrometry connectors; constant temperature belt; can fully ensure the secondary detection of tar and various reaction gases.
STA-125 Thermal Analysis Instrument Specifications
The abscissa axis can choose temperature or time as the scale.
|
Can choose absolute weight or percentage as the scale for the ordinate axis.
|
Can be maintained at 1250 degrees or 1550 degrees for 72 hours.
|
LCD real-time display of furnace temperature, sample temperature, quality, gas path status, etc.
|
Can plot step cooling curve.
|
Kinetics of crystallization calculation.
|
DSC (differential scanning calorimetry) Data
|
DSC Measuring Range:
| ±1mw～±500mw
|
DSC Precision:
| ±0.1μw
|
Temperature Data
|
Models Selection by Temperature Range:
| STA-115: RT to 1150℃
STA-125: RT to 1250℃
STA-145: RT to 1450℃
STA-155: RT to 1550℃
|
Temperature Accuracy:
| ±0.1℃
|
Heating Rate:
| 0.1℃/min - 100℃/min
|
TG (thermal gravimetric) Data
|
Measuring Range:
| 1-200mg (0-5g option)
|
Resolution:
| 0.1μg
|
Thermogravimetric Noise:
| ＜0.1μg
|
Vacuum Degree:
| 2.5×10-2Pa (option with vacuum system)
|
Atmosphere Control System:
| Using mass flow controller (MFC), for corrosive gas can be customized.
|
Thermostatic Control System:
| constant temperature range: RT - 400 ℃
support extension:
STA-GC (gas chromatograph)
STA-MS (mass spectrometry)
STA-FTIR (fourier transform infrared reflection)
|
DTA (differential thermal analysis) Data
|
Measuring Range:
| ±10μv to ±2000μv
|
DTA Resolution:
| 0.01μv
|
Crucibles:
| standard: ceramic crucible 0.06ml or 0.12ml
option: platinum (Pt), aluminum, graphite and quartz crucible
|
>>
Fruit Hardness Tester FHT-15 for sale
>>
Mini EL01 405nm 500mw Laser Module Cutter Metal Engraving 3D DIY Machine Engraver with Blue-Violet Laser Diode
>>
12*64 mesh corrosion resistance dutch weave stainless steel 316 wire mesh screen
>>
Glass bottle measurement mid-set type milk parlor for cow
>>
Th-8203s Universal Material Testing Machine
>>
16x8 folding stainless steel garage door for garage
>>
Hsg Laser High Quality Fiber Laser Cutter Price Sheet Metal Factory Directly Supply Ultra High Power 6000W-30000W Laser Cutting Machines for Metal
>>
Farm Machine 12HP Diesel Power Tiller Cultivator Power Weeder
>>
Wrought Iron Cabin Hook Eye Shed Gate Door Latch Locker Holder
>>
Custom Made Resin Music Trophy Cups Plaque Figurine American Sculpture Statue of Liberty Metal Trophy
>>
Quality All Steel Heavy Duty New Radial Goodyear Pattern Semi Truck Tires TBR Tyres G667 11r22.5 12.00r22.5 12r22.5 295/80r22.5 425/65r22.5
>>
Sephcare natural plant extract pigment beta carotene carrot powder
>>
Portable Small Loading Lift Electric Truck Mounted Forklift Warehouse Load Elevator
>>
Large Disposable Film Bathtub Bag for Salon, Household and Hotel Bath Tubs, High Quality Disposable
>>
Pu Foam Apple Anti Stress Ball – Soft Bouncy Ball for Toys
>>
Stainless Steel Multifunctional Tools Outdoor Camping Portable Screwdriver Head Pocket Tools Gift
>>
Online/Flying Laser Marking Machine for Code Logo Date Key Phone Case PCB Cable Printing Jewelry Laser Engraver Metal Laser Engraving Machine 20W 30W 50W 100W
>>
Lowest Price Jewelry Laser Welding Machine Medical Equipment Spot Welding Processing Dental Filling Crafts
>>
Large stock KLQ6129 KLQ6123K KLQ6896 accessories parts for higer bus parts
>>
Chicken Shed Brooding Heating Equipment Automatic/Manual Ignition Poultry Chicken Chick Gas Heater Brooder
