Product Details
Product Description
Product Description
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands
1. Set the vent mode to A/C VC. 2. Use the quick key to set Rate to 3. • I:E, Tinsp, VT, and Flow may need to be adjusted to set the Rate to 3. 3. Select Alarm Setup and set Apnea time to 10 seconds. 4. Select START VENTILATION > Continue. • Verify the high priority Apnea alarm sounds after 10 seconds. • Verify the Apnea alarm shows with a red background in the alarm bar. • Verify the display unit alarm light flashes red. 5. Select Alarm Setup and set Apnea time to the maximum setting. • Verify the Apnea alarm no longer sounds after a breath is detected. • Verify the Apnea alarm shows with a grey background in the alarm bar. • Verify the display unit alarm no longer flashes. Patient disconnected alarm test 1. Set the vent mode to A/C VC. 2. Use the quick key to set PEEP to 5 cmH2O. 3. Select START VENTILATION > Continue. 4. Disconnect the inspiratory limb hose from the ventilator. • Verify the high priority Patient disconnected alarm sounds. • Verify the Patient disconnected alarm shows with a red background in the alarm bar. • Verify the display unit alarm light flashes red. 5. Reconnect the inspiratory limb hose to the ventilator. • Verify the Patient disconnected alarm tone no longer sounds. • Verify the Patient disconnected alarm shows with a grey background in the alarm bar. • Verify the display unit alarm light no longer flashes. 8 Alarms and troubleshooting 2065490-001 8-37 Nebulizer not connected alarm test 1. Set vent mode to A/C VC. 2. Select START VENTILATION >Continue. 3. Connect an Aerogen Nebulizer to the ventilator and start an Aerogen nebulizer procedure. 4. Disconnect the nebulizer cable. • Verify the low priority Nebulizer not connected alarm sounds. • Verify the Nebulizer not connected alarm shows with a blue background in the alarm bar. • Verify the display unit alarm light is blue. 5. Reconnect the nebulizer cabl
>>
Manufacturer Exports Ss 201 304 316 316L 409 Cold-Rolled and Hot-Rolled Smooth Stainless Steel Plate
>>
High Quality Stainless Steel Marine Hardware Bruce Boat Anchor
>>
TC/SC133 Centrifugal cleaner
>>
MS Carbon Big Size Carbon Steel Pipe Round Square Rectangular Steel Tube
>>
Rubber Control Arm Bushing for VW 7m0407181A
>>
John Deere Parts R84618 Engine Inlet -Outlet Valve for 6076t
>>
China Manufacture Wholesale Price Passenger Home Glass Elevator for Center Market
>>
PTFE Resin Without Pfoa Polytetrafluoroethylene
>>
Factory Price Tree Log Bamboo Chipping Machine Wood Shredder Crusher Drum Wood Chipper
>>
European Crystal Rubik's Cube Candlestick Golden Iron Hollow Ornaments Crafts Romantic Candlelight Dinner Wedding Ornaments
>>
Gear-Driven Petrol 170f Cultivator/ Mini Tiller/Power Tillers
>>
High Efficiency Wood Chips Hammer Mill Biomass Sawdust Hammer Mill
>>
High Frequency Large Capacity Pebble Limestone Vibrating Screen Construction Ore Washing Separator
>>
Ergonomic Modern Swivel Metal Gaming Computer Executive Leather Staff Office Chair
>>
New Type Hydraulic Release System Cone Crusher
>>
600PCS/H Best Selling Automatic Chapati Roti Baking Cooling Stacking Pressing Laminating Food Machine Supplier Factory Price Customized Production Line
>>
Tetra Sodium Pyrophpsphate (TSPP) Industrial Grade Drum
>>
German Type High Quality Combination Pliers, Nickel Iron Plated
>>
Pulse Magnetic Therapy Device For Erythrocyte Aggregation Rehabilitation And Full Body Blood Circulation
>>
Hot Selling 2600W 50L Collection Bag Garden Electric Leaf Shredder with Induction Motor TM-SD9022
