Welcome to visit

5SHY5055L0002 ABB 3BHE019719R0101 GVC736BE101 stock

Product Details

Product Details

Product Description

Product Description
5SHY5055L0002 ABB 3BHE019719R0101 GVC736BE101 stock
5SHY5055L0002 ABB 3BHE019719R0101 GVC736BE101 stock
Insulated power supplies and transformers always have a parasitic capacitance between input and output. This capacitance produces common mode displacement currents through the power supply line during voltage jumps. The gate unit is robust against these currents, however it is recommended to minimize them. This is especially important for applications with series connected devices where higher dv/dt referenced to ground occur. There are several possibilities to reduce such parasitic currents: • Minimize parasitic capacitance of the power supply • Feed the supply line through a ferrite core. This will reduce the peak amplitude of the displacement current and also reduce its rise time, thus relieving the strain on the gate unit • Use transformers with shielded windings. The gate unit supply connector has a pin that is directly connected to the housing (cathode). This pin can be used to carry the displacement current and bypass it to the cathode. Figure 7 shows the principle of this method.
Our Email: 2235954483@qq.com
contact number:13313705507
contacts:HE
The displacement current is bypassed through the red marked path to ground and does therefore not flow through the sensitive electronics on the gate unit board. The connection from the isolated power supply to the IGCT is ideally made with a shielded cable using the shield to connect the secondary shield winding of the transformer with the gate unit.
The IGCT starts up around 3 seconds after supplying with power. During start up it consumes a high peak current and the voltage VGIN may dip below 28 V. A voltage dip which doesn’t meet the mask requirement in figure 8 (and figure 9), may damage the IGCT or a malfunction occurs. The voltage VGIN must be measured directly at the power input connector X1. For AC-Operation a scope with mathematic functions must be used. The absolute value from the voltage VGIN is to filter. The -3 dB frequency of the low pass filter should be at least 1.5 kHz. This method calculates the theoretical DC value of an AC square wave.
The optical control interface uses standard components, which are widely used throughout the industry. It is built up around the HFBR-1528 / HFBR-2521Z of Avago Technologies 1), operating at 650 nm. The recommended standard type optical fiber is 1 mm POF (Plastic Optical Fiber), which gives a cost-effective and easy-to-use solution. For long distances (> 15 m) the 200 μm HCS type (Hard Clad Silica) type is recommended (optional feature, please contact HCS factory). One of the most sensitive parts of the gate unit is the optical Interface. Strict adherence to the mounting instruction (chapter 4.5) is highly recommended to inhibit faults. The specific optical data are given in the data sheets of the IGCT products and on the supplier’s web site.

>> Roll Forming Machine Machinery Forming Machine
>> Professional Air Hockey Striker and Puck
>> Factory ODM&OEM Custom Made Non Stick Aluminium Perforated Bread Cookie Baking Sheet Oven Tray
>> OEM 0028350901 A0028350901 high quality heater core for MercedesBenz NG 1013
>> High Quality Custom Rubber Logo Embroidery Patch and Soft PVC for Sale
>> High Quality Thin Surface Mounted Dob Rimless 18W 24W 30W LED Panel Light/LED Down Litht
>> High Speed OPP BOPP PE Film Paper Non Woven Fabric Six Colors Belt Flexo Printing Machine
>> Similar to Solidwood Rosewood Wooden Marble Tile for High-End Decoration
>> New Designer Kid Shoes Customized Children Jogging School Footwear
>> 9.3MM-15.24MM Wire Gauge and 270k/1860mpa Construction Application Prestressed Wire Strand
>> 4mm 5mm 6mm 100% New Virgin Material Vinyl Plank Wood Grain Finish Waterproof Floating Click Lock Interlocking Rigid Core Plank Laminate Spc Flooring
>> 295pcs Rotary Accessory Kit/ agriculture tool
>> Horizontal Machining Center High-Precision Mold Processing CNC Milling Machine
>> YDS2 series Standard Efficiency Electric Motor
>> TPW-57-48-18 Factory supply reliable thermal printer Thermal Paper roll price
>> Door Customizable Heat Insulated White Canada Style House UPVC PVC Door
>> Cotton Conveyor Belt for Biscuit Cooling Line
>> Sinotruk Brand New HOWO 6X4 16000 Liters Foam Water Tank Fire Fighting Truck
>> Slag Briquetting Machine
>> SILVERFIR Batterien GmbH 2VEG400 SILVERFIR BATTERY