Two-component encapsulating system based on polyurethane.

Product Details

Product Description

Product Description
l Two-component encapsulating system based on polyurethane.
981 polyurethane encapsulant
It is used for potting various electronic components such as precision capacitors. It has high hardness after curing, and is a good material to replace epoxy resin. Vacuum degassing and heating equipment is required.
982 polyurethane encapsulant
It is used for potting and bonding of precision lightning arresters, various transformers, transformers, filters, control boards, igniters, etc.
983 polyurethane encapsulant
General-purpose type, suitable for potting all kinds of electronic products.
984 polyurethane encapsulant
It has excellent elasticity and toughness, can be repaired, has excellent electrical properties, and can replace silicone potting compound.
985 Polyurethane Adhesive:
Semi-flowing, used for bonding and sealing electronic components.
Product performance and packaging specifications

Performance indicators	981	982	983	984	985
Color	White/Yellow	White/Yellow	White/Yellow	White/Yellow	White/Yellow
Viscosity, (mpa.s，A/B)	5000~8000/300~380				Half-flowing
Viscosity of mixture (mpa.s)	3000~5000				Half-flowing
Operation time,mins (min)	≤30	30~45	45~60	45~60	30~60
Initial curing time (h)	3~5	5~7	8~10	8~10	3~6
Full curing time (h)	24	36	48	48	24
Hardness, (shore A/D)	≥80D	80±10A	60±10A	40±10A	80±10A
Thread shrinkage (%)	0.3
Density,,g/cm3, 25℃ (g/cm3)	1.5~1.7
Application temperature, (℃)	-60~150
Dielectric strength, (kV/mm, 25℃)	≥25
Volume resistivity (Ω·cm，25℃)	1.0×1015
Thermal conductivity (W/M·K)	≥0.6
Shear strength (MPa)	≥3.5	≥2.3	≥1.5	≥0.8	≥4.5

Attributes and Application
Two-component, room temperature curing, hardness adjustable polyurethane material, good fluidity, room temperature curing, cured into elastic rubber. It has excellent high and low temperature resistance, hydrolysis stability and excellent insulation properties. The potted electrical parts have a variety of functions such as fixing, insulation, heat dissipation, explosion-proof, and confidentiality. It is suitable for all kinds of pouring bonding and sealing of electronic components such as high-pressure, high-frequency, damp-hot environments and underwater instruments and meters.
Processing
1. Clean up the potting place, no oil, no water, no debris.
2. Weigh the A and B components according to the ratio, put them in the mixing tank, stir fully and mix evenly (do not stir the air into the glue when stirring). It is best to vacuum and degasser for about 5 minutes, and the amount of glue should not exceed 1/2 of the container, otherwise the glue will overflow during degassing.
3. Slowly pour the mixed rubber into the device to be potted. In winter construction work, if the ambient temperature is lower than 5 °C, it is best to preheat the A and B components to about 15 °C.
4. The potted workpiece is cured at room temperature, and the surface can only enter the next process after drying, and it takes 1 day to completely cure. In summer, the temperature is high, and the curing will be faster; In winter, when the temperature is low, the curing will be slower.
Notes：
1. If component A is placed for a long time and there is precipitation or stratification, it should be stirred evenly before use; Component B is easy to crystallize at low temperature, and should be placed in a higher temperature room in advance to dissolve without affecting the performance of the product.
2. The mixed glue should be used up at one time, and the unused A and B components should be sealed and stored separately.
3. Sealed and stored in a cool and dry place for six months.

---

>> Taijia TEM-620XH reinforcement testing rebar detector scanner price rebar scanner and cover meter
>> Newest products replacement car hood-steel for model T33 Rogue 2021
>> Factory wholesale waterproof pe ce oversleeve
>> 755nm picosecond laser tattoo removal 808 nm diode laser hair removal machine
>> Mopa Color Laser Marking Machine for Stainless Steel Cooper Brass Chromium Nickel Molybdenum Alloy
>> Factory Hot Artificial Stone Slab Calacatta Quartz White Quartz Floor and Kitchen Bench Top Grey Cut to Size Flooring Floor Tile
>> 3000L 1000L IBC Blow Molding Machine for Making Plastic Water Tank
>> Byloo Wholesale Factory Price Fitness Equipment Spring Grip Chest Expander Power Twister Bar
>> Hydraulic Strand Jack with Synchronous Lifting for Heavy Lifting Hydraulic Lifting System
>> Taijia integrated rebar scanner concrete rebar detector price digital rebar detector and size
>> ANSI 55-2 Porcelain / Ceramic Pin Insulator for High Voltage Transmission Line
>> 30FT Coast Guard Aluminum Patrol Craft with Wheel House
>> SMT part D4DL-1DFG-B Omron safety door switch for printed circuit board components of SMT line machines
>> 2024 Travel Elderly Folding Scooter Easy Operate Lightweight 4 Wheel Mobility Scooters
>> MAICTOP hot sale rear spoiler for Prado fj150 2018-2021 tail wing
>> Transparent Acrylic 216 Earring Holes Stand Plexiglass Jewelry Organizer for Girls
>> Inunion A Grade Eternal Rose Fancy Flower Box Handmade Floral Craft Gifts
>> Li-ion Battery Cordless Power Tools Electric Rotary Hammer Drill
>> ABB KUC755 module New stock
>> Wholesale Party Colored Folding Restaurant Dining Table Cheap Light Blue Kids Chair Covers