Hengpu 1K Grey Primer Supplier Good Adhension Acrylic Car Paint Refinish Lacquer Easy Operation Auto Paint

Product Description

1K Grey Primer
Product features: a one-component self-drying paint made of alkyd resin, anti-rust pigment, fillers, cellulose and other materials. It has good construction performance, quick drying, easy polishing and storage stability
Applicable substrate: polished and completely dry clean surface of old paint, polyputty, etc.
Mixing ratio (volume ratio) : stir evenly, can be constructed.
Spraying requirements: coating -4 cups/viscosity 20-25 seconds, upper pot spray gun 1.3-1.5mm caliber, lower pot spray gun 1.7-1.8mm caliber, air pressure is 3-5 bar, spray 2-3 channels, stand for 2-5 minutes.
Drying time: non-sticking time: 5 minutes /25ºC. Polishing time: 30 min /25ºC.
Grinding process: Use water sandpaper P600#-P1000#
Points for attention:
(1)Please stir well before use and filter well.
(2) In order to ensure the painting effect, please use standard thinner (fast drying, standard drying, slow drying) can not be thick coating, the use of other poor thiiner will lead to paint foaming, discoloration and other maladies. Do not pour the remaining base paint back into the original paint bucket after spraying. Otherwise, resin and pigment may delaminate, sink, and agglomerate. then next spraying, it may fall off during polishing, affect the adhesion between the basecoat paint layers, and crack.
1k primer
Car Paint, Auto Paint, Automotive Paint, Car Refinish, Auto Refinish, Automotive Refinish ----1K Primer Surfacer
Fast drying one pack primer surfacer, suitable to cover minor defects in surface of putty or existing finish. It is easy to apply with strong filling power and ease of sanding.

Surstrates	Dried and sanded existing finishes and putty
Surface Cleaning	Remove wax, grease or other contaminations with degreaser.
Mixing Ratio	1K Primer Surfacer: Thinner=1: 0.8-1.0
No. of Coats	2-3 coats, total 30-50um
Flash-off Time	5-10 minutes at 25degree
Spray Guns & Pressure	Gravity Feed 1.4-1.6mm 3-5kg/cm 2 Siphon Feed 1.7-1.8mm 3-5kg/cm 2
Dry Time	30 minutes at 25degree
Sanding	Dry sanding with P400-P600 or wet sanding with P800-P1000.
Re-coat	After drying and sanding, re-coat with all kinds of topcoat
Shelf Life	2 years in original sealed can at cool and dry place at 20degree
Packaging	1kg, 4kg, 1L, 4L

Car Paint, Auto Paint, Automotive Paint,
Auto refinish, Car Refinish, Automotive refinish ---
Fast Double Pack Primer Surfacer
Multy-purpose double pack fast drying primer surfacer, with strong filling power, fine adhesion between coats and good sanding properties, can increase gloss and build of topcoat. The recommended application temperature is below 25 degree

Substrates	Dried and sanded existing finishes, all kinds of primer and putty.
Surface Cleaning	Remove wax, silicon and other contaminations with degreaser
Mixing Ratio	Temperature	Item	Weight	Volume
	below 25 degree	Fast Primer Surfacer	100 parts	3 parts
		Fast Drying Hardener	25 parts	1 parts
		Thinner	25-40 parts	1-1.5 parts
Pot Life	25 degree, 45 minutes
No. of Coats	2-3coats, 40-60um in total.
Flash-off Time	5-10 minutes, 25 degree
SSpray Gun & Pressure	Gravity Feed 1.4-1.6mm 3-5kg/cm 2 Siphon Feed 1.7-1.8mm 3-5kg/cm 2
Drying Time	25 degree, 2-3 hours
Sanding	P400-P600 dry or P800-1000 wet.
Re-coat	After drying and sanding, re-coat all kinds of topcoat.
Shelf life	2 years in original sealed can at cool and dry place at 20 degree
Packaging	Primer Surfacer: 4kg; Hardener: 1L

Good Quality Car Paint, Car refinish, Auto paint, auto refinish
Epoxy Primer Fast Dry
Exellent rust-proofing and excellent adhension to steel, aluminium and galvanized steel.

Substrates	Dried and sanded existing finishes, steel, iron and glass fiber reinforced plastic
Surface Cleaning	Remove wax, silicon and other contaminations with degreaser
Mixing Ratio	Temperature	Item		Weight		Volume
	Above 30degree	Fast Epoxy Primer		100 parts		3.5 parts
		Drying Hardener		20 parts		1 parts
		Thinner		20-30 parts		1 parts
	Under 30 degree	Fast Epoxy Primer		100 parts		3.5 parts
		Fast Drying Hardener		20 parts		1 parts
		Thinner		20-30 parts		1 parts
Pot Life	At 25degree, Fast Drying Hardener: 3-4 hours; Drying Hardener: 4-6 hours
No. of Coats	2 coats, about 30-50 um
Flash-off Time	At 25degree, 5-10 minutes between coats.
Spray Gun and Pressure	Gravity Feed 1.4-1.6mm 3-5kg/cm 2 Siphon Feed 1.7-1.8mm 3-5kg/cm 2
Drying Time	Item		25degree		70degree
	Fast Drying Hardener		3-5 hours		40-50 minutes
	Drying Hardener		6-8 hours		50-60 minutes
Sanding	Dry sanding with P240-P400, or wet sanding with P600-P800
Re-coat	After drying and sanding, re-coat with putty, primer surfacer and all kinds of topcoat.
Shelf Life	2 years in original sealed can at cool and dry place at 20degree
Packaging	Epoxy primer in 5kg, Hardener in 1L, Thinner in 1L

---

>> OEM service UVC light Sterilization Hepa filter air purifier for home
>> Factory wholesale customization auto parts power lift tailgate lift kit double rod up suction for lexus nx
>> Gantry Type Milling Machine X2012A Worktable Size 3000X1250
>> AD1212HB-A71GL
>> H0NEYWELL 8C-PCNT02 Module
>> two twin blades durable mens face metal double edge rose gold chrome hand resin handle barber shaver shaving razor
>> Slim Fit Polo Shirt for Office or Casual Wear
>> Large Diameter Carbon Steel Tube Hot Rolled Welded Pipe AISI 4140 Alloy Tube 4130 Chromoly Seamless Steel Pipe 42CrMo4 1020 1045 5120 5140
>> MAICTOP Car body kits Plastic Front Rear Bumper For Land Cruiser 200 lc200 fj200 2012 2016
>> Sephcare High Quality Food Grade Colour Extract Powder Carmines
>> Wholesale Super Abrasive Diamond Lapping Powder
>> Brass clamp-in tubeless tire valves for truck and bus TR572
>> Restaurant Equipment Salad Display Pizza Refrigerated Preparation Counter Top Salad Bar
>> High Homogeneity Fused Silica/Quartz/Synthetic Fused Silica/Hpfs Quartz/Synthetic Fused Silica 0A 0f 0c
>> Dereike 11kw Dhb 840c 011 High Pressure Blower Vacuum Blower Environment with Aquaculture Waste Water Treatment Wwpt Plant 550mbar Pressure
>> New Design Brake Disc Machining Lathe Vertical Brake Disc Hub Lathe
>> 150A/200A Combo 2 CCS2 Inlet Socket Fast Charger Inlet DC Sockets With 0.5m Cable
>> Racing car accessory high performance exhaust header manifold for mx5 header
>> VR Eye Mask Foam Pad/VR Cushion
>> Rice Combine Hydraulic Parts Retail Cbxw-F