EPS Thermocol Recycling Hot Melting Machine, One Set Has Twice The Capacity
US$3,000.00-8,000.00
1 Set
(MOQ)
Basic Info.
Model NO.
225
Service Life
<15 Years
Certification
CCC, CE, ISO
Voltage
380V
Structure
Vertical
Crushing Shafts
2 PCS
Conveyor
Optional
Feeding Materials
EPS/XPS/Epo/EPE etc
Output
Two Barrels
Transport Package
Plywood Box
Specification
320/350
Trademark
Myaid
Origin
China
HS Code
8419899090
Production Capacity
100 Sets Per Month
Packaging & Delivery
Package Size
250.00cm * 150.00cm * 200.00cm
Package Gross Weight
1200.000kg
Product Description
The EPS thermocol hot melting machine can crush and hot melt EPS/XPS/EPE/EPO etc foam materials.It works without heater at chamber end.It is different with traditional melt machine.There are two chambers to hot melt loose foam waste. Benefits of 'Friction Produces Heat' 1) Almost needs no pre heating time,you can feed materials immediately after you turn on machine.Traditional lumps machine with heaters need about 20 minutes to heat chamber. 2) Almost no smoke to be produced. 3) Almost no smell to be produced. 4) Options to be with heater if the foam materials are wet.Cause heater can increase temperature to be higher inside chamber. Benefits of two barrels Bigger capacity you get from melt,users can just feed as many as he wants and get high capacity. Benefits of two crushing shafts The two shafts can rotate face to face to crush loose foam waste and its crushed scraps can be easily melts.Bigger capacity you can get from it. Machine works with two crushing shafts in hopper. Conveyor for feeding materials is optional. Temperature control and frequency control is installed at control box. Hard teech reducer and copper motor are on the hot melt machine. Machine Advantage Machine Parameter
