
| US$70,000.00-75,000.00 | 1 Set (MOQ) |
| Se-460T/IP Plastic Injection Molding Machine Information | |||||||||
| Item | Unit | A B C | |||||||
| Screw diameter | mm | 90 | |||||||
| Theoretical shot volume | cm³ | 2640 | |||||||
| Shot weight (PET) | g | 3062 | |||||||
| Shot weight (PET) | oz | 108 | |||||||
| Length/Diameter ratio | L/D | 25 | |||||||
| Injection pressure | Bar | 1283 | |||||||
| Injection rate | cm³/sec | 910 | |||||||
| Max.screw speed | rpm | 133 | |||||||
| Clamping force | KN | 4600 | |||||||
| Max.daylight | mm | 1180*1130 | |||||||
| Open stroke | mm | 810 | |||||||
| Space Between Tie-bars | mm | 820*770 | |||||||
| Min mould dimension | mm | 300 | |||||||
| Mould thickness range | mm | 830 | |||||||
| Ejector force | KN | 150 | |||||||
| Ejector stroke | mm | 220 | |||||||
| No.of ejector pins | unit | 13 | |||||||
| Max.motor power | KW | 36+36 | |||||||
| System pressure | MPa | 175 | |||||||
| Heater input power | KW | 52 | |||||||
| Oil filling capacity | L | 600 | |||||||
| Machine size | M | 9.2*2.0*2.9 | |||||||
| Net weight | KG | 20000 | |||||||