ZARF65155-L-TV 6515582mm ultrasonic atomizing transducer piezo ceramic for atomizing

Product Details

Product Description

Designation	Dimensions																		Mounting dimensions		Basic load ratings				Limiting speeds		Bearing frictional torque MRL Nm	Rigidity axial caL N/µm	Tilting rigidity ckL Nm/ mrad	Mass moment of inertia3) Mm kg · cm2	Axial runout6) µm	Mass m =kg
																			Mounting dimensions		axial		radial		Limiting speeds
																			Da max.	da min.	dyn.Ca	stat. C0a	dyn.Cr	stat. C0r	nG oil	nG grease
	d	D	H	H1	H2	H3	C	C1	D1	D2	D3	B	B1	B2	r min.	r1 min.	d1	J	Da max.	da min.	N	N	N	N	min–1	min–1
ZARF65155-TV	65	155	82	51	–	–	22.5	12.5	110	–	–	17.5	–	–	0.3	0.6	6	128	111	97	172,000	500,000	54,000	104,000	2,600	900	4	4,800	4,000	51	1	5.1
ZARF65155-L-TV	65	155	–	–	103	72	22.5	12.5	110	90	108	17.5	38.5	16	0.3	0.6	6	128	111	88	172,000	500,000	54,000	104,000	2,600	900	4	4,800	4,000	60.1	1	5.7

Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs

>> 400*800 mm High Precision Hydraulic CNC Control Surface Grinding Grinder Machine
>> 470 Ton Cheap Chinese Made Injection Molding Machine
>> Infz Carbon Fiber Motorcycle Parts Wholesaler Ytx7a-BS Lithium Motorcycle Battery China Maintenance Free Motorcycle Battery for 12n6.5-BS
>> ZARF65155-L-TV 65*155*82mm ultrasonic atomizing transducer piezo ceramic for atomizing
>> Continuous Waste Plastic Recycling Oil Pyrolysis Plant
>> Factory Price Popular Design Sanitaryware Ceramic Washbasin Rectangular Thin-Edged Vanity Bathroom Wash Basin Economic Sink Discount
>> V-Show Wall Wash Lights Outdoor IP65 LED Bar
>> Single Spindle CNC Turning Lathe with Hydraulic Chuck 0.01mm High Precision CNC Metal Milling and Cuttingmachine with GSK System
>> Original Autumn Winter High Quality Cardigan Men′s Fashion Neckline British Retro Slim Light Mature Custom Logo Business Sweater for Men
>> 10 gauge white cotton thread knitted yellow PVC dotted anti-slip safety work gloves
>> China Top1 Factory Monopile Donut Floating Fenders Suppliers for Shibata/Trelleborg
>> Premium Automatic Kraft Bowl Machine for Paper Cups
>> Modern Metal LED Wall Sconce Light for Hotel Corridor/Home
>> Folding Bowl travel portable picnic set silicone bowl retractable lunch bowl lunch box
>> HC-R058F High Quality Desktop Visual TCI Canine Machine AI Gun Veterinary Transcervical Artificial Insemination Gun for Dog
>> Economic urine bag high quality pvc material medical disposable 2000ml urine collection bag
>> Kwiklok Wear Liners for Mining Shovel or Backhoe Buckets
>> Scintillation Crystal Yso- High Performance Scintillator
>> Reloj de mujer de moda wholesaler waterproof lady bracelet custom logo oem wrist watch for women
>> Xt-X-10b Operating Microscope Is Mainly Suitable for Gynecological Examination and Microsurgery