Y2 Ie3 Ye3 3phase Electric Motor 0.12kw 1.5kw 11kw 75kw 400kw

Product Description

We,GOGOGO Mechanical&Electrical Co.,Ltd specialize in high quality energy-efficient electric motors. The combination of the best available materials, high quality sheet metal and the right amount of copper in the rotor/stator makes GOGOGO's electric motors highly energy-efficient.
We design our electric motors to fit and match our customer's requirements at our production site. The electric motors can be supplemented with a range of options and accessories or modified with a special design to endure any environment.
Electric motors account for a large part of the electricity used. If we look at the world, electric motors account for about 65 percent of the electricity used in industry. To reduce this use of electricity, there are legal requirements regarding the efficiency of electric motors manufactured in the EU, or exported into the EU.
Three-phase, single-speed asynchronous motors are covered by the requirements today. Asynchronous motors are the most common type of motor and account for 90 percent of the electricity consumption of all electric motors in the power range 0.75 - 375 kW.
According to that standard, the energy efficiency classes have the designations IE1, IE2, IE3 and IE4, where IE4 has the highest efficiency.

Revision of the standard A revision of the standard was decided by the Ecodesign Committee in 2019. The revision was published on October 1, 2019. The following will apply:
For electric motors From July 1, 2021 2-, 4-, 6- and 8-pole motors from 0.75 - 1000 kW (previously up to 375kW) are included in efficiency class IE3.
Motors within the range 0.12 - 0.75 kW must meet efficiency class IE2.
The previous possibility to replace IE3 motors with an IE2 motor with frequency drive disappears.
From July 1, 2023 For 2-, 4-, 6- and 8-pole motors from 0.12 - 1000 kW, the efficiency class IE2 now also applies to Ex eb certified motors with high safety.
Single phase motors with greater power than 0.12 kW are covered by the corresponding IE2 class.
The higher efficiency class IE4 applies to 2, 4 and 6-pole motors between 75 - 200 kW.
For frequency inverters From July 1, 2021 For use with electric motors with power from 0.12 - 1000 kW, the frequency inverter must pass efficiency class IE2 specially designed for inverters.
Current requirements according to the Directive Since 16 June, 2011 it is prohibited to place electric motors below energy efficiency class IE2 on the market, or to put them into service in the EU.
Since January 1, 2015, electric motors within the range 7.5 - 375 kW (2-, 4-, and 6-pole) must meet the requirements for IE3, or IE2 if the latter is combined with frequency inverters for speed control. The legal requirement thus provides two options.
From January 1, 2017, the requirements were tightened so that all motors 0.75 - 375 kW (2-, 4-, and 6-pole) must meet the requirements for IE3, or IE2 if they are combined with frequency inverters.
Exemptions from the current directive Operation other than S1 (continuous drive) or S3 (intermittent drive) with a nominal cyclicity factor of 80 percent or lower. Made for assembly with frequency inverters (integral motors). Electric motors made for use in liquid. Electric motors that are fully integrated into a product (e.g. a gear, pump, fan or compressor) where the energy performance is not tested independently of the product. Brake motors Electric motors intended for operation exclusively:
At altitudes exceeding 4 000 meters above sea level. If ambient air temperatures exceed 60°C. Where maximum operating temperature exceeds 400°C. Where ambient air temperatures are less than -30°C for all motors, or less than 0°C for motors with water cooling. In explosive atmospheres (as defined in Directive 94/9 / EC 9) The requirements do not apply to ships or other means of transport that carry goods or persons, since there must be specially designed engines for this purpose. (If the same mobile conveyor belt is used on ships as well as on land, the rules apply).
Also, the requirements do not apply to repair of motors previously placed on the market, or put into service - unless the repair is so extensive that the product will in practice be brand new.
If the motor is to be further exported for use outside Europe, the requirements do not apply.
Some other requirements apply to water-cooled motors

Model	Output power		Speed	Amps	Eff %	Cos φ	packing size
	KW	HP	r/min	A			mm
Y2-631-2	0.18	0.24	2820	0.52	66	0.8	225*138*180
Y2-632-2	0.25	0.33	2825	0.68	68	0.81	225*138*180
Y2-711-2	0.37	0.5	2830	0.99	70	0.81	250*155*214
Y2-712-2	0.55	0.75	2840	1.38	73	0.83	250*155*214
Y2-80M1-2	0.75	1	2825	1.83	75	0.83	290*233*175
Y2-80M2-2	1.10	1.5	2825	2.61	78	0.84	290*233*175
Y2-90S-2	1.50	2	2840	3.42	79	0.84	315*250*195
Y2-90L-2	2.20	3	2840	4.48	81	0.85	340*250*195
Y2-100L-2	3	4	2880	6.22	83	0.88	380*283*245
Y2-112M-2	4	5.5	2890	8.13	85	0.88	400*313*265
Y2-132S1-2	5.50	7.5	2900	11.1	86	0.88	475*350*315
Y2-132S2-2	7.50	10	2900	14.8	87	0.88	475*350*315
Y2-160M1-2	11	15	2930	21.6	88.4	0.88	605*430*385
Y2-160M2-2	15	20	2930	28.8	89.4	0.89	605*430*385
Y2-160L-2	18.50	25	2930	35.5	90	0.89	650*430*385
Y2-180M-2	22	30	2940	41	90.5	0.9	670*462*430
Y2-200L1-2	30	40	2950	55.5	91.4	0.9	775*512*475
Y2-200L2-2	37	50	2950	67.9	92	0.9	775*512*475
Y2-225M-2	45	60	2970	82.1	92.5	0.9	820*562*530
Y2-250M-2	55	75	2970	99.7	93	0.9	930*630*575
Y2-280S-2	75	100	2970	134	93.6	0.92	1000*685*640
Y2-280M-2	90	125	2970	160	93.9	0.92	1050*685*640
Y2-315S-2	110	150	2980	195	94	0.92	1240*948*865
Y2-315M-2	132	180	2980	233	94.5	0.92	1310*948*865
Y2-315L1-2	160	215	2980	279	94.6	0.92	1310*948*865
Y2-315L2-2	200	270	2980	348	94.8	0.92	1310*948*865
Y2-355M1-2	220		2980			0.92	1500*1020*1010
Y2-355M2-2	250	340	2980	433	95.3	0.92	1530*1020*1010
Y2-355L1-2	280		2980			0.92	1530*1020*1010
Y2-355L2-2	315	420	2980	544	95.6	0.92	1530*1020*1010
Y2-631--4	0.12	0.16	1340	0.44	58	0.72	225*138*180
Y2-632-4	0.18	0.24	1340	0.59	63	0.73	225*138*180
Y2-711-4	0.25	0.33	1370	0.78	66	0.74	250*155*214
Y2-712-4	0.37	0.5	1370	1.09	69	0.75	250*155*214
Y2-80M1-4	0.55	0.75	1390	1.5	71	0.75	290*233*175
Y2-80M2-4	0.75	1	1390	2	73	0.77	290*233*175
Y2-90S-4	1.10	1.5	1390	2.9	76.2	0.77	315*250*195
Y2-90L-4	1.50	2	1400	3.7	78.5	0.79	340*250*195
Y2-100L1-4	2.20	3	1430	5.1	81	0.81	380*283*245
Y2-100L2-4	3	4	1430	6.8	82.6	0.82	380*283*245
Y2-112M-4	4	5.5	1440	8.8	84.2	0.82	400*313*265
Y2-132S-4	5.50	7.5	1440	8.8	86	0.84	475*350*315
Y2-132M-4	7.50	10	1440	15.4	87	0.85	515*350*315
Y2-160M-4	11	15	1460	22.3	88.4	0.85	605*430*385
Y2-160L-4	15	20	1460	30.1	89.4	0.85	650*430*385
Y2-180M-4	18.50	25	1470	36.5	90.5	0.85	670*462*430
Y2-180L-4	22	30	1470	43.1	91.2	0.85	710*462*430
Y2-200L-4	30	40	1470	57.6	92	0.86	775*512*475
Y2-225S-4	37	50	1480	69.6	92.5	0.87	820*562*530
Y2-225M-4	45	60	1480	84.7	92.8	0.87	845*562*530
Y2-250M-4	55	75	1480	102	93	0.87	930*630*575
Y2-280S-4	75	100	1480	140	93.8	0.87	1000*685*640
Y2-280M-4	90	125	1480	167	94.2	0.87	1050*685*640
Y2-315S-4	110	150	1480	199	94.5	0.88	1270*948*865
Y2-315M-4	132	180	1490	238	94.8	0.88	1340*948*865
Y2-315L1-4	160	215	1490	284	95	0.9	1340*948*865
Y2-315L2-4	200	270	1490	355	95.2	0.9	1340*948*865
Y2-355M1-4	220		1490			0.9	1500*1020*1010
Y2-355M3-4	250	340	1490	443	95.3	0.9	1530*1020*1010
Y2-355L2-4	280		1490			0.9	1530*1020*1010
Y2-355L3-4	315	420	1490	556	95.6	0.9	1530*1020*1010
Y2-711-6	0.18	0.24	835	0.66	62	0.66	250*155*214
Y2-712-6	0.25	0.33	860	0.89	63	0.68	250*155*214
Y2-80M-6	0.37	0.5	900	1.3	63	0.7	290*233*175
Y2-80M1-6	0.55	0.75	900	1.7	66	0.72	290*233*175
Y2-90S-6	0.75	1	910	2.3	69	0.72	315*250*195
Y2-90L-6	1.10	1.5	910	3.1	73	0.73	340*250*195
Y2-100L-6	1.50	2	940	3.9	76	0.76	380*283*245
Y2-112M-6	2.20	3	940	5.6	79	0.76	400*313*265
Y2-132S-6	3	4	960	7.3	91	0.77	475*350*315
Y2-132M-6	4	5.5	960	9.4	83	0.78	475*350*315
Y2-132M-6	5.50	7.5	960	12.6	85	0.78	515*350*315
Y2-160M-6	7.50	10	970	16.8	86	0.79	605*430*385
Y2-160L-6	11	15	970	24.3	87.5	0.79	650*430*385
Y2-180L-6	15	20	970	31.6	89	0.81	710*462*430
Y2-200L1-6	18.50	25	970	37.6	90	0.83	775*512*475
Y2-200L2-6	22	30	970	44.7	90	0.83	775*512*475
Y2-225M-6	30	40	980	57.6	92	0.86	845*562*530
Y2-250M-6	37	50	980	69.8	92	0.86	930*630*575
Y2-280S-6	45	60	980	86	92.5	0.86	1000*685*640
Y2-280M-6	55	75	980	105	92.8	0.86	1050*685*640
Y2-315S-6	75	100	990	142	93.5	0.86	1270*948*865
Y2-315M-6	90	125	990	170	93.8	0.86	1340*948*865
Y2-315L1-6	110	150	990	207	94	0.86	1340*948*865
Y2-315L2-6	132	180	990	245	94.2	0.87	1340*948*865
Y2-355M1-6	160	215	990	292	94.5	0.87	1500*1020*1010
Y2-355M2-6	185		990			0.87	1500*1020*1010
Y2-355M4-6	200	270	990	365	94.7	0.87	1530*1020*1010
Y2-355L1-6	220		990			0.87	1530*1020*1010
Y2-355L3-6	250	340	990	455	94.9	0.87	1530*1020*1010
Y2-801-8	0.18	0.24	650	0.86	52	0.61	290*233*175
Y2-802-8	0.25	0.33	650	1.13	55	0.61	290*233*175
Y2-90s-8	0.37	0.5	670	1.43	63	0.62	315*250*195
Y2-90L-8	0.55	0.75	670	2.07	64	0.63	340*250*195
Y2-100L1-8	0.75	1	690	2.4	71	0.68	380*283*245
Y2-100L2-8	1.10	1.5	690	3.3	73	0.68	380*283*245
Y2-112M-8	1.50	2	690	4.4	75	0.69	400*313*265
Y2-132S-8	2.20	3	710	5.6	79	0.73	475*350*315
Y2-132M-8	3	4	710	7.6	81	0.73	515*350*315
Y2-160M1-8	4	5.5	720	10.3	81	0.73	605*430*385
Y2-160M2-8	5.50	7.5	720	13.4	83	0.75	605*430*385
Y2-160L-8	7.50	10	720	17.5	85	0.76	650*430*385
Y2-180L-8	11	15	730	25.3	87	0.76	710*462*430
Y2-200L-8	15	20	730	33.7	89	0.76	775*512*475
Y2-225S-8	18.50	25	730	40	90	0.78	820*562*530
Y2-225L-8	22	30	740	47.4	90.5	0.78	845*562*530
Y2-250M-8	30	40	740	63.4	91	0.79	930*630*575
Y2-280S-8	37	50	740	77.8	91.5	0.79	1000*685*640
Y2-280M-8	45	60	740	94.1	92	0.79	1050*685*640
Y2-315S-8	55	75	740	111	92.8	0.81	1270*948*865
Y2-315M-8	75	100	740	151	93	0.81	1340*948*865
Y2-315L1-8	90	125	740	178	93.8	0.82	1340*948*865
Y2-315L2-8	110	150	740	217	94	0.82	1340*948*865
Y2-355M1-8	132	180	740	261	93.7	0.82	1500*1020*1010
Y2-355M2-8	160	215	740	315	94.2	0.82	1530*1020*1010
Y2-355L3-8	185		740			0.82	1530*1020*1010
Y2-355L4-8	200	270	740	388	94.5	0.82	1530*1020*1010

We have our own design and development team, we can provide customers with standard AC electric motors, We can also customize the single phase/three phase motors according to the special needs of customers. Currently our main motor products cover three - phase high - efficiency motors,general three - phase motors, single phase motors, etc.
The main motor ranges: IE3 / YE3, IE2 / YE2, IE1 / Y2, Y, YS, MS, YC, YL, YY, MC, MY, ML motors.
American standard NEMA motors
Russian standard GOST ANP motors
Taiwan type AEEF motors,YC motors
Why choose us?
Guarantee of our motors:18-24months
General elivery time:15-30days
Price of motors: Most reasonable during your all suppliers
Packing:Strong export cartons/wooden case/plywood cases/pallets
Payment way with your order: T/T,LC,DP,etc
Sample order: Acceptable
Shipment way: Sea ship,Air flight,Express way,Land transfer way.
If you are looking for new better supplier or purchase electric motors, please feel free contact us now.You will get all what you want.

---

>> Sliding Drawer Mirror
>> Gamemax 80 Plus Bronze PSU ATX Switching PC Power Supply for Gaming
>> 8t Semi Continuous Waste Tyre Pyrolysis Plant for Oil
>> Reaching Hotel Apartment Free Design Australian Standard Matt Black Aluminum Double Glaze Sliding Doors & Window
>> Y2 Ie3 Ye3 3phase Electric Motor 0.12kw 1.5kw 11kw 75kw 400kw
>> Wholesale Custom logo credit stainless steel metal herb weed grinder cards
>> Women Casual Handbag Large Capacity Waterproof Crossbody Bag Nylon Totes
>> Tysim Km260 Hydraulic Telescopic Arm of Excavator Construction Equipment
>> Catering Plastic Wooden Chair/Snack Wooden Design Chair/Folding Fitting Chair
>> Children and Adults Universal Basketball Stand/Movable/Lifting Basketball Stand/Outdoor Sports
>> 2024 Hot Selling Multi Function Wood Working 1530 Automatic Chuck Turning Wood Lathe
>> PVC Sliding Glass Door Philippines Price And Design
>> High Quality Plastic Fitting Injection Molding Machine with Servo
>> Veterinary Medical Equipment Handheld Veterinary Ultrasound (SonoScan A6V)
>> BENTLY 3500/40M（140734-01)
>> Medical Silicone Mask Mould Lim Liquid Silicone Rubber LSR Injection Mold
>> Warm Ups Jackets OEM Spring Stylish Material Adults Fitness fall cotton training cloths tracksuit for women
>> Renda 2 4 Double Shafts Used Wasted Tyre Tire Recycling Crushing Shredder Machine
>> Corrugated Roof Sheet Metal Sheet Rolling Machine Roll Forming Machine
>> 2000L 2500L 3500L 5000L 10000L Automatic Brew System Beer Making Machines Commercial Craft Beer Brewing System Complete