| 1. Inner tank: Food-grade stainless steel SUS304-2B or SUS316L with 1.2mm-1.5mm thickness |
| 2. Tank Exterior Shell: High quality Inox 0.4mm |
| 3. Heat Insulation: High-density polyurethane integrated foam-forming insulation layer |
| 4. Vacuum Tube: Red copper heat pipe, three-target glass tube, aluminium fin |
| 5. Bracket: Inox or Aluminum alloy, suitable for slope and flat roof installation |
| 6. Optional Devices :Electric heater, Intelligent Controller, Anode magnesium bar,T/P & Safety valve |
| 7. Rated Working pressure: 6.0 Bar |
| 8. Angle of bracket: 25°~51° |
| 9. Anti-freezing: > -40°C |
10. Package: If it is full container loading, the standard package is Seaworthy carton ;
If it is the less than container loading, the best is plywood crate and seaworthy carton combination package |
Competitive Advantage: 1.Adopts the best conduction performance metal- heat pipe (copper) 2.Can be used all year round in the cold climate 3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly 4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa 5.No water in the tube, one tube broken don't influence the system working 6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage 7.Dual-purpose brackets for both flat and inclined roof 8.The system is pressurized,it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out
We are looking for agents in countries and regions. If you are interested, please contact me.
