| US$2,493.00-2,790.00 | 1 set (MOQ) |
| Mainly used for pre-treatment of polyethylene and polypropylene plastic products. The better ink adhesion is available after the pre-treatment. Cylinder bottles made by PP PE fit Advantages 1. Mainly used for the surface pretreatment of PE and PP plastic products. 2. Micro motor imported from Japan, stepless speed timing mode is adequate for different workpiece requirement. 3. The machine is two sides equipped with baffle-boards to improve the heat efficiency. 4. Advanced gushing nozzle is design generates a good combustion result, it is a product that saves energy. 5. According to the size of your product that is to be printed, replace the taper support to meet the different requirement of workpiece |
| 1. Frame width: | 250mm |
| 2. Burning Gas: | LPG gas |
| 3. Power: | 220V/50Hz |
| 4. Conveyor speed: | 0~10m/min |
| 5. Outline dimension: | 2000*450*1250mm |
| 6. Conveyor size: | 2000*340mm |
| 7. Combustion-supporting gas: | Compressed air 8kg/cm2 |
| 8. Diameter range of the product treated: | 10~24mm |
| 9. Height range of the product treated: | 20~300mm |
| 10. Speed of conveyor: | 1800~3000psc/hr |
| 11.Package dimension: | 2330*650*1100mm |
| Price Terms | FOB or CFR |
| Payment Terms | T/T or L/C |
| Packing | Wooden case |
| Lead Time | 7 days after confirm PO |
| SKU | 5 SET |
| Standards Certificate | CE |
