Product Details
Product Description
Product Description
The function of the filler in the cooling tower is to increase the heat dissipation, prolong the residence time of the cooling water, increase the heat exchange area, and increase the heat exchange. Evenly distribute the water. Not stuffing something into a tower that needs to be cooled. A cooling tower is a device that cools hot fluids (including water) to a reasonable temperature. The waste heat generated in industrial production or refrigeration process is generally conducted with cooling water. The function of the cooling tower is to exchange the cooling water with the waste heat with the air in the tower, so that the waste heat is transferred to the air and dissipated into the atmosphere. Application scope of cooling tower: air conditioning cooling system, refrigeration series, electric furnace, injection molding, tanning, power generation, steam turbine, aluminum profile processing, air compressor, industrial water cooling and other fields.
The hexagonal honeycomb packing produced has two forms: inclined tube and straight tube. There are two kinds of materials: polypropylene and glass fiber reinforced plastic.
The inclined tube is mainly used for various precipitation and sand removal. It is the most widely used in water supply and drainage projects in the past ten years and has become a water treatment device. It has the advantages of wide application range, high processing effect and small footprint. It is suitable for water inlet sand removal, general industrial and domestic water precipitation, sewage precipitation, oil separation and tail tension concentration, etc. It is suitable for both new construction and renovation of existing old tanks, and can achieve good economic benefits.
Main features of PVC honeycomb cooling tower fill:
1. The wet circumference is large and the hydraulic radius is small.
2. The laminar flow state is good, and the particle settlement is not disturbed by turbulent flow.
3. When the length of the inclined pipe is 1 meter, the effective load is designed according to 3-5 tons/m2·hour. The VO is controlled within the range of 2.5-3.0 mm/s, and the quality of the effluent is the best.
4. The processing capacity of the inclined tube sedimentation tank is 3-5 times that of the advective sedimentation tank, and the processing capacity of the accelerated clarifier and the pulse clarifier is 2 times.
>>
Performance Racing Sprint Car Steel Left Front Rotor
>>
High-Speed Fully Automatic Tissues Production Machine for Businesses
>>
LED Rear Light Tail Light Brake Stop Turn Reverse Light for Truck Trailer Tractor RV Ship Yacht
>>
Lanying wire mesh machine 24mesh ultra fine wire mesh weaving loom for pressure leaf filter
>>
Metal filter element end caps for indoor filtration
>>
sunflower seed cleaning equipment trade sunflower seeds shall with sunflower seeds 160 gms packaging
>>
China Bamboo Chips Rotary Drying Equipment
>>
Wholesale corner bracket galvanized steel shelf angle brackets custom metal table corner connector
>>
Br-28 Alloy Wheel Rim Repair Straightening Machine Rim Repair Lathe
>>
Rubber Case for iPhone 8 Plus
>>
bamboo curtain knitting machine, reed curtain knitting machine
>>
High Pressure Flexible Transparent PVC Fiber Reinforcend Braided Hose Pipe 6mm to 75mm for Garden Water Air Fuel Gas Oil
>>
Factory supply heavy duty cable pulley large diameter cable guide cable roller
>>
Shoulder and Neck Massager PGG Hot Care Mute 15 Modes Adjustable Massager Remote Control Pain Relief Tool New Neck Massage
>>
Qtd125-10 Luffing Jib Tower Crane Lifting Equipment Jib Cranes Tower Crane
>>
Biscuit Production and Packing Line Full Automatic
>>
11kw High Pressure Screw Air Screw Compressor with Tank, Line Filters Laser Cutting
>>
High speed rotating bearing Z-527791.ZL
>>
Automatic Horizontal Dough Mixer for Bakery Dough 400kgs
>>
Custom Women Puffy Purse Tote Bag Personality Fashion Ladies Fashion Handbags
