Acrel AGF-AE-D solar pv energy meter plastic enclosure Single phase 2 channel 3 wire

Product Description

Product Description
AGF-AE-D Bidirectional Reflux Monitoring Meter (1-phase,3-wire with UL certificate)Products Description● Measurement: Active Powr, Reactive Power, Current, Voltage and etc● Wiring: 1-phase 3-wire Connection● Current Rating: 100A or 200A AC (paired with external CTs)● Communication: RS485 (MODBUS-RTU)● Application: Using in distributed Solar PV and Anti-reflux Inverters● Dimension: 54.1*87.8*52mm (H*W*D)● Installation: 35mm DIN Rail● Standard&Certificate: UL1741;TUVPV Dedicated Two Channels AC Power MeterIn a single inverter system, the meter is connected directly to the inverter. If your inverter has a built-in revenue grademeter(RGM; the inverter is referred to a revenue grade inverter), you can connect an external meter on the same bus as the RGM.Used for distributed Solar PV● Reflux Monitoring● Connected with Load Line through CTs● Directly connect with invertersSingle-phase Three-wire Connection● Rated Voltage of Line to N: 120V● Rated Voltage of Line to Line: 208/240V● Grids Supported： L1/L2/N/PERS485 Communication● MODBUS-RTU Protocol● Communicate with Inverter to realize anti-reflux Function● Response Time: ≤1sBidirectional Metering● Active&Reactive Energy Metering● Rated RMS Current: 100/200A● Accuracy: ±0.5%/±1%Technical ParameterMeter Electrical ServiceUnitsAGF-AE-D/100AGF-AE-D/200Rated Voltage-Line to N120VRated Voltage-Line to Line208/240VExtended Voltage Range88%~110%AC Frequency60HzGrids SupportedL1/L2/N/PEPower Consumption1.2WCommunicationMeter Communication InterfacesRS 485Response Time≤1SMeter AccuracyRated RMS current100200A1%-100% of CT Current±0.5±1%Current TransformersNumber of Supplied Current Transformers2DimensionsI.D:15 O.D:3570.5×54.5×39 (H×W×D)mmStandard ComplianceSafetyUL1741Installation SpecificationsDimensions(H×W×D)54.1×87.8×52mmWeight0.2kgOperating Temperature Range-30~55℃Relative Humidity (noncondensing)5 - 90%Mounting TypeDIN-Rail，35mmThe meter is intended to be installed in a power distribution box in the end use. The acceptance of the application is to be evaluated in the end product.Wiring IllustrationConnected with Load Line through CTsDirectly connect with inverterDimension & InstallationSolution StructureCertificationCompany ProfileFAQ

---

>> GAPV Good Quality Rear Bumper Lights Reflector for Camry 81920-06030 2015years
>> Diesel Truck Concrete Pump Machine 37m Chinese Concrete Pump Truck Price
>> Fast Laminating A3 A4 A5 A6 Hot Laminator Plastic Laminating Machine Manual Table Pouch Laminator For Office/ Home/School
>> Waste Plastic Cleaning Recycling Plant (TL3700)
>> Air Mesh
>> Steel Tape Custom Pocket Tape Portable Mini Steel Measure Thickened Wear-Resistant 5m 3m Measuring T Metre 5m Meter 5m
>> Factory direct supply Ethanol Yeast/Distiller's Yeast/active dry yeast for Wine
>> Precision Forging Flange Petroleum Lifting Machinery Parts Ring Forging Heat Treatment
>> Sensitive Laboratory Electronic Analytical Balance Scale with High Precision 0.001g
>> 3 Ply Type I Medical Disposable Mask (Purple+Green+Yellow Gradient) CE marked and meets the requirements of EN14683:2019 Type I
>> 23-24 Real Madrid Training Uniform Special Edition Jersey Short sleeved Football Jersey Purple Customized Men's Quick Drying T-shirt
>> Hot Sell in 2022 Felting Needles for Needle Punching Machine
>> melt process metallic filter element RT-063
>> Spices Seasoning Chilli Pure Red Hot Chili Pepper Powder
>> Rotary bauxite washing machine price Alumina Bauxite Washing Sieving Machine in Indonesia
>> Electric tailgate car modification with automatic lifting rear door car tailgate lift for BUICK GL8 652T 2020+
>> AZS channel block
>> Fashion Ladies New Anti-Slip Lightweight Outdoor Casual Sandals for Women
>> 3m Surface Touchscreen Panel 24.36inch 17-9011-226/98-0003-3375-1
>> America Precise Positioning Welding Machine YAG Pulse Laser Resource