Welcome to visit

High Quality Pure Polyurea Coating Spray Elastomer for Waterproofing Anticorrosion

US$6.50
410-40,999 kg
US$5.00
41,000+ kg

Basic Info.

Model NO.
900
Main Raw Material
Polyurethane
Method
Spray
Level
Finish Coat
Drying Method
Air Drying
Certification
ISO9001
Substrate
Ceramic
Components
Film Forming Matter
Formation Mechanism
Conversion Type
Tensile Strength
18MPa
Tear Strength (Kn/M)
68
Acid Resistance 10%H2so4 or 10%Hci,30d
No Rust, No Bubbles, No Peel off
Salt Resistance 30g/L,30d
No Rust, No Bubbles, No Peel off
Transport Package
Drum
Specification
210L
Trademark
STWD
Origin
China
HS Code
3909310000
Production Capacity
500, 000 Tons/Year

Product Description



STWD900 is a 100% solid content aromatic polyurea elastomer. It has excellent waterproof anticorrosion and abrasion resistance property which has been widely applied in the industrial and commercial filed for the anticorrosion waterproof protection.
Product Parameters *Solvent free, 100% solids, safe, environmentally friendly and odor free.
*Rapid cure, can be sprayed forming on any bent, slope and vertical surfaces without sagging.
*Dense coating, seamless, with good flexibility.
*High adhesive strength, fast bonding well on steel, concrete, wood, glass fibers and other substrates.
*Excellent impact resistance, abrasion resistance
*Excellent anticorrosion and chemical resistance to acids, alkali, salts etc.
*Excellent waterproof performance
*Good shock absorbing performance
*Excellent resistance to temperature variation
*Fast cure, application site back to service quickly
*Excellent durability to reduce maintenance cost for lifelong
*Extend the service life of sprayed structure
Products information
Item Part A Part B
Appearance
Pale yellow liquid
Adjustable color
Specific gravity (g/m³) 1.12 1.05
Viscosity(cps)@25ºC 800 650
Solid content (%) 100 100
Mix ratio(by volume) 1 1
Gel time (second)@25ºC 4-6
Surface dry time(second) 15-40
Theoretical coverage (dft) 1.08kg/m2 film thickness:1mm
Physical properties of products
Item Test standard Result
Hardness (Shore A) ASTM D-2240 92
Elongation rate(%) ASTM D-412 460
Tensile strength(Mpa) ASTM D-412 17
Tear strength (kN/m) ASTM D-624 68
Impermeability(0.3Mpa/30min) HG/T 3831-2006 impermeable
Wearable(750g/500r)/mg HG/T 3831-2006 4.5
Adhesive strength(Mpa)concrete base HG/T 3831-2006 3.1
Adhesive strength(Mpa) steel base HG/T 3831-2006 11
Density(g/cm³) GB/T 6750-2007 1.02
Cathodic disbondment [1.5v,(65±5)ºC,48h] HG/T 3831-2006 ≤15mm

Product corrosion medium
Acid resistance 10%H2SO4 or 10%HCI,30d No rust, no bubbles, no peel off
Alkali resistance 10% NaOH, 30d No rust, no bubbles, no peel off
Salt resistance 30g/L,30d No rust, no bubbles, no peel off
Salt spray resistance, 2000h No rust, no bubbles, no peel off
Oil resistance 0# die sel, crude,30d No rust, no bubbles, no peel off
(For reference: the above data is acquired based on GB / T9274-1988 test standard. Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data)

Product application environment
Environment temperature 0ºC-45ºC
Product spray heating temperature 65ºC-70°C
hose heating temperature 55ºC-65ºC
Relative humidity ≤90%
Dew point ≥3ºC
Application guide
Recommend spray machine GRA CO H-XP3 Polyurea spray equipment
Spray gun Fusion-air purge or mechanical purge
Static pressure 2300-2500psi
Dynamic pressure 2000-2200psi
Recommend film thickness 1000-3000μm
Recoating interval ≤6h

Application note Agitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product's quality will be affected. Spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of STWD polyurea speical primer please refer to STWD company's other brochure. Always apply STWD900 on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of STWD spray polyurea series.
Product curing time
Substrate temperature Dry Foot traffic Solid dry
+10ºC 30s 45min 7d
+20ºC 23s 15min 6d
+30ºC 17s 5min 5d
Note: the curing time varies with the environment condition especially the temperature and relative humidity.
Shelf Life
* From the manufacturer date and on original package sealed condition:
Part A: 10 months
Part B: 10 months
*storage temperature:+5-35°C
Packing: Part A 210kg/drum, part B 200kg/drum
Make sure the product package sealed well
* store in cool and ventilated place, avoid direct sunshine exposure.
Product health and safety information
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
Integrity declaration
STWD guarantees all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. STWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.



>> Hot selling cookware kitchenware non stick light weight cast iron frying pan set cookware Pre-seasoned Wholesale Practical Cookware Set Cast Iron Frying Pan
>> Free Sample Food Grade Compound Phosphate P220 With Best Price
>> Bestselling 3.5 Cubic Meters Self Loading Mixer Truck, Mobile Concrete Mixer
>> Laser Shaft Alignment System TKSA 11/TKSA 31/TKSA 41/TKSA 51/TKSA 71 Shaft Alignment Tool Bearing Accessories
>> Leyo 5 Axis CNC Milling Machine T800 Fanuc Robodrill Compact Machining Centre T800
>> Red Custom Sublimation Hoodie of Christmas Tree Pattern
>> Green Formwork Quick Release Table Form Perfect Slab Formwork Solution for Flatslab
>> Scrap Mother Board Recycling Machine for separating precious metals from scrap mother boards for sale
>> PCB Fiberglass Copper Foil 2 Layer FR4 Copper Plate MICA Glass Sheet
>> Short Sleeve Medical patient gown disposable hospital patient gown
>> Efficient Four-Way Reversing Valve for Superior Cooling Performance
>> BBQ Seasoning for Pork BBQ Spice Mix for Slow Cooking All-Purpose
>> Static and Dynamic Friction Coefficient Sliding friction measuring coating film friction coefficient instrument
>> Linear Bearing Axis Rail Rod Shaft Hard and Flexible Bars
>> Dough Mixer Machine Flour Mixing Machine Flour Mixer Machine Price
>> Thermal Insulated Custom Large Pizza Food Heated Panda Delivery Cooler Bag For Motorcycle
>> HC-A033V Factory price handheld ultrasound scanner for veterinary palm veterinary ultrasound machine
>> Automatic Ice Cream Stick Popsicle Pillow Packing Machine With Auto Dispenser
>> Accessories Parts Car Styling Abs Rear Tail Trunk Pedal Cover Car Rear Bumper Plate Cover Trim For Fortuner 2016+
>> Aluminum Glass Curtain Wall For Office Buildings wall mounted electric curtains