Product Details
Product Description
Product Description
| Designation | Dimensions | Mounting dimensions | Basic load ratings | Limiting speeds | Bearing frictional torque
MRL
Nm | Rigidity axial
caL
N/µm | Tilting rigidity
ckL
Nm/ mrad | Mass moment of inertia3)
Mm
kg · cm2 | Axial runout6)
µm | Mass m =kg |
| axial | radial |
Da
max. | da
min. | dyn.Ca | stat. C0a | dyn.Cr | stat. C0r | nG oil | nG grease |
| d | D | H | H1 | H2 | H3 | C | C1 | D1 | D2 | D3 | B | B1 | B2 | r
min. | r1
min. | d1 | J | N | N | N | N | min–1 | min–1 |
| ZARN45105-L-TV | 45 | 105 | – | – | 103 | 74.5 | 25 |
| 90 | 70 | 88 | 17.5 | 38.5 | 14 | 0.3 | 0.6 |
|
| 91 | 68 | 154,000 | 405,000 | 40,000 | 82,000 | 3,300 | 1,150 | 3.5 | 4,000 | 2,100 | 28.1 | 1 | 3.42 |
Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs
>>
2022 Good price Upsetting Forged Rebar Coupler /Mechanical Splicing Rebar Sleeve
>>
Multi-Function 1GMP-100g Custom Three Point Suspension Agriculture Ridging Fertilizer Laminating Machine
>>
High Quality Four Seasons Universal Sandwich fabric Car Seat Cover
>>
Cheap Ts Type Green Black Blue Color Roller Chain Guide for Sale
>>
Winery equipment Vineyard system and wine fermentation tank
>>
Greenhouse Restaurant Ventilation Air Cooling 6L Water Tank with Wheels Portable Outdoor Cooler Humidifier Industrial Stand Pedestal Mist Spray Electric Fan
>>
New Modern Minimalist Elephant Ear Sofa Bed Leather Nordic Living Room Straight Row Size Apartment Smart Sofa
>>
Custom Color 15X13 Agricultural Wheel Steel Wheels From China Factory
>>
White and Purple Custom Sublimation Jacket of Simple Style with White Zipper
>>
YY Home aluminium french casement window with grid Australia Standard Frame Glass Casement House Window
>>
Paper Pulp Forming Equipment Egg Tray Making Machine
>>
China Manufacturer Full Specification 2.1/2.4/2.8 M Tractor Driven Steel Knife Grass Cutter Rotary Mower Disc Mower Disc Mower
>>
Granite Marble Stone Edge Bridge Saw Cutting Machine Infrared Laser 4 5 Axis Stone Chamfer CNC Cutting Machine Bridge Cutter
>>
8 Hook White Urban Outfitters Garment Rack For Small Spaces
>>
Skmei 1713 concepts luxury watches stainless steel back water resistant japan movt minimalist quartz watch
>>
22 Ton 1cbm Hydraulic Crawler Excavator 320gc
>>
High Efficient Wiped Film Short Path Distillation for Botanical Separation
>>
M7130 Horizontal Surface Grinder Precision Rectangular Surface Grinding Machine with Magnetic Chuck
>>
3200mm Woodworking Precision Panel Saw for Wood Cutting
>>
8L Stainless Steel Electric fish Fryer / Double Tanks chips Fryer
