Product Details
Product Description
Product Description
he connecting wires that come into contact with MoSi2 components are made of aluminum braided tape or multi-layer aluminum foil. The clamp on the outside can only serve as a clamp and does not need to conduct electricity. The end of the wire is connected to the busbar. To prevent stress from being transmitted to the component, the length of the wire should be slightly greater than the straight distance between the component and the busbar.
Fixing clip Elementholder
The weight of the entire MoSi2 component is borne by the fixed clamp, and the position of the component is also determined by it. Therefore, careful installation is necessary to ensure that the components are vertically suspended. To avoid local overheating, the conical part of the lower end of the components must extend into the furnace.
When installing MoSi2 components, do not tighten the screws on the clamp too tightly at once. When the components reach high temperature, tighten them again because the components have a certain degree of plasticity and are not easy to break. The temperature of the clamp part should generally not exceed 200 ℃, therefore, the contact voltage between the clamp wire and the component should be reduced by 0.1V. To avoid radiative heat transfer to the chuck, the distance between the lower end of the chuck and the top of the brick should be less than 50mm. In order to avoid damage, generally 6/12mm diameter components cannot be used for a long time with 170A, and 9/18mm diameter components cannot be used for a long time with 300A.
>>
Chinese high quality Force display controller for compression testing machine
>>
New Design Flexible Stone Wall Board Soft Tiles for Exterior Wall Cladding
>>
Floating Fish Feed Extruder Machine Extruder for Aquatic Fish Shrimp Feeds Floating Fish Feed Pellet Extruder Machine
>>
100KW 125KVA Yuchai Diesel Generator
>>
Standard Gearbox Helical Hypoid Gearbox Widely Used in Transmission Freighter Gear Reducer Speed Increase Gearbox
>>
Zucoo Solar Powered SD308 Exhausts System Test DC12V Automotive
>>
30t Atom Moving Head Cutting Press/Traveling Head Cutting Press/Special Size
>>
304 Stainless Steel Brushed Hot and Cold 360 Degree Rotating Folding Kitchen Sink Faucet
>>
oil seal 90136849 90289512
>>
High-Efficiency Hot Press Machine for Wood and Metal Processing
>>
casting Items for Ward nursing equipments assembly parts
>>
Double Shoulder School Bag Backpack with Double Ultra-Smooth Zippers for Boy/Girl
>>
Classic Tactical Military Style Jungle Boots
>>
FEP Cable 300V Tinned Copper Conductor Fluoroplastic Cable with UL1332
>>
Precision Auto AC Compressor Valves by Anhui Changsheng
>>
KHH wholesale Brazilian Human Hair Lace Front Wig,10A Grade Water wave Human lace Wigs,Cuticle aligned hair with pre plucked
>>
Blinds Inside Single Pane Casement Door Tempered Glass UPVC PVC Door
>>
Good Quality Galvanized Filter Metal End Caps for air filters
>>
Medical Trolley Medicine Trolley Jyk-C12c
>>
Security Outdoor Single Active Infrared Beam Sensor Single Beam Sensor
