Product Details
Product Description
Product Description
| Designation | Dimensions | Mounting dimensions | Basic load ratings | Limiting speeds | Bearing frictional torque
MRL
Nm | Rigidity axial
caL
N/µm | Tilting rigidity
ckL
Nm/ mrad | Mass moment of inertia3)
Mm
kg · cm2 | Axial runout6)
µm | Mass m =kg |
| axial | radial |
Da
max. | da
min. | dyn.Ca | stat. C0a | dyn.Cr | stat. C0r | nG oil | nG grease |
| d | D | H | H1 | H2 | H3 | C | C1 | D1 | D2 | D3 | B | B1 | B2 | r
min. | r1
min. | d1 | J | N | N | N | N | min–1 | min–1 |
| ZARF75185-TV | 75 | 185 | 100 | 62 | – | – | 27 | 15 | 135 | – | – | 21 | – | – | 0.3 | 1 | 6 | 155 | 136 | 113 | 290,000 | 890,000 | 72,000 | 132,000 | 2,100 | 700 | 8 | 6,600 | 8,500 | 149 | 2 | 9.4 |
Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs
>>
2024 Guoyu High Quality Light Trap for Chicken Hen House Greenhouse Farms Ans Fat Chicken Farm
>>
Customized Matt Finish Kraft Paper Bag Food Package Heat Seal Gravure Printing Food,food & Beverage Packaging Kraft Bags
>>
Waste Plastic Pet Bottle Flake Separating Washing Production Line Recycling Manufacturing Machine
>>
UICE Latest Design Soft Top Surfboard Durable Epoxy Sup Paddle Board for Surfing Kayaking Fishing
>>
M4 (R8/NT30) Conventional Vertical Milling Machine Knee Type Turret Milling Machine
>>
FF FRONT FENDER INNER PLATE CAR PARTS W253 FOR MERCEDES BENZ 2536900130/2536907501
>>
High Quality Agricultural Share Plough for Sale
>>
Filling Almond Cashew Banana Chips Candy Pouch Bag Packing Machine
>>
China Supplier Wholesale Food Ingredient Spray Dried Garlic Extract Powder/Gruanlar/Minced
>>
Ck1120 Swiss Type CNC Automatic Lathe Machine
>>
Column Hydraulic Leather Foam EVA Cutting Machine for Shoes Making
>>
5-16mm Output Size Fine CS Symons Cone Crusher for Quartz, Gold, Copper, Metal Ore Hard Tone
>>
Coupling Shaft with Inner Thread, Turning and Side Milling Process, Connecting Shaft
>>
Automatic Hardware Hinge Packaging Machine Bearing Packing Machine For Industry
>>
uv quartz glass tube sterilizer uvc disinfection germicidal lamp ultraviolet uv lamp
>>
Ce Standard Dilling Dia 40mm Steel Mechanical Clamping Radial Drilling Machine
>>
Precision Tin Dlc Coating Injection Mould Stamping Punch Die Components Custom Mold Parts
>>
Datek 1 Drawer 5 7 10 11 Trays CD DVD Duplicator
>>
Taijia OGM series Mechanical Flow Meter Totalizer Oval Gear Flowmeter Digitale Flowmeter
>>
Portable 4 Seasons Beach New Waterproof Travel Custom Folding Picnic Outdoor Camping Mat
