| Specifications and Technical parameters | |
| Grinding diameter scope: | φ25-500mm |
| Max. Grinding length | 1000mm |
| Center height | 270mm |
| Max. Work piece weight | 2000kg |
| Grinding Wheel size(O.D.X W X I.D.) | φ750x75xφ305mm |
| Grinding Wheel-spindle speed | 870rpm |
| Max. Worktable traverse | 1080mm |
| Max. Worktable travel speed | 3m/sec |
| Grinding wheel linear speed | 35m/sec |
| Wheel head rapid approach and withdrawal traverse | 100mm |
| Automatic intermittent infeed (fine/coarse) | 0.02/0.0025mm |
| Manual microfeed (fine/coarse) | 0.02/0.0025mm |
| Hydraulic pump displacement | 25ml/r |
| Hydraulic pump pressure | 1.6Mpa |
| Coolant flow | 50L/min |
| Total motor power | 20.63kw |
| Grinding wheel head motor power | 15kw |
| Weight (Almost) | 8300kg |
| Overall dimensions (L X W X H) | 5800x2140x1550mm |
| Main Accessories | |
| Complete set of electric equipment | 1 set |
| Grinding wheel dresser | 1 pc |
| Steady rest | 1 set |
| Grinding wheel adaptors | 1 pc |
| Grinding wheel balancing mandrel | 1 set |
| Levelling wedge | 12 sets |
| Special customized accessories | |
| Grinding wheel balancing stand | 1 set |
| Paper-tape filter | 1 set |
| Carbide tipped center | 1 pc |
| Center grinding attachment | 1 set |
| Open-type steady-rest (length to be ground) | (1500/2000/3000mm)1/2/3 set |
| Magnetic separator | 1 set |
| Working accuracy (Standard test work piece) | |
| Roundness | 0.003-0.005mm |
| Uniformity of dia. In longitudinal section | 0.008mm |
| Surface roughness | Ra0.32um |
| Surface waviness | 0.0016mm |
