Electric tool battery short circuit testing machine

Product Details

Product Description

Product Description
Mobile lithium battery short circuit testing machine STANDARD FEATURES

Item	Specification
Internal Dimension	500500500mm(WDH)
External Dimension	7008001530mm(WDH)
Internal Material	SUS201 stainless steel plate, 1.2mm thick and affixed with Teflon;
External Material	Paint treatment of cold-rolled steel sheet
Observe Window	250*250mm
	Two layers of tempered glass
	Transparent window with stainless steel mesh
Exhaust port	Diameter 100mm
Pressure relief port	200*200mm
Door	Single door design, the door is equipped with a safety limit switch The side is equipped with an explosion-proof chain Only close the door to operate the device to ensure the safety of personnel
Testing Hole	There are two testing hole diameter 50mm, for cable connect.
Control Mode	Key Type
Temperature collection range	RT-1000℃
Temperature Acquisition Channel	Channel 1
Temperature Display Accuracy	±0.5℃
Voltage collection range	0-100V
Voltage Acquisition Channel	Channel 1
Voltage Display Accuracy	±0.5%
Maximum Short-circuit Current	1000A
Current Acquisition Channel	Channel 1
Current Display Accuracy	±0.5%
Internal Resistance of Device Loop	80±20mΩ
Voltage	Single Phase 220V
Power	200W
Machine Weight	95kg

Main functions of the short circuit tester for power tool batteries
Short-circuit detection: Simulate the short-circuit situation that the battery may face through the short-circuit load to help assess the short-circuit resistance and safety of the battery.
Real-time monitoring: Monitor the voltage, current, temperature and other parameters of the battery and record the data to provide a basis for the assessment of battery safety performance.
Data storage and analysis: Record all kinds of data during the testing process and generate test reports for subsequent analysis and reference.
Automatic protection: During the testing process, the tester will automatically detect abnormal conditions (e.g. over-current, over-temperature, etc.) and take automatic protection measures to stop the test to ensure safety.
Multiple test modes: It usually supports multiple short-circuit test modes, such as instantaneous short-circuit, continuous short-circuit, etc., adapting to the test needs of different types of batteries.
Components of Battery Short Circuit Tester for Power Tools
Test bench/box: usually a fixed test platform, used to place the battery to be tested, to ensure the stability of the test process.
Battery Connection Port: The port that provides the electrical connection for the battery, usually with a protective device to ensure the safety of the wiring.
Load Module: The part used to simulate a short-circuit load, usually a resistor or wire, whose resistance can be controlled to simulate different short-circuit conditions.
Control Panel/Display: Operator interface for setting test parameters, starting the test, and viewing the data during the test in real time.
Monitoring system: Used to monitor the battery's voltage, current, temperature and other status in real time to ensure the safety of the testing process.
Protection mechanism: including over-current and over-temperature protection devices, used to automatically stop the test when abnormalities are detected to avoid accidents.
Data recording and analyzing system: used to record, save and analyze test data and generate test reports.
Safety Precautions for Battery Short Circuit Tester for Power Tools
Pre-operation check: Make sure that the functions of the battery short-circuit tester for power tools are normal, especially whether the safety protection mechanism (over-temperature, over-current protection, etc.) is working properly.
Wear safety equipment: the operator should wear appropriate safety equipment, such as protective gloves, protective glasses, etc., to avoid injury caused by accidental battery leakage or explosion.
Avoid prolonged testing: During the testing process, the battery should be avoided to be in short-circuit state for a long time to reduce the probability of battery damage or danger.
Regular inspection of equipment: regular inspection and maintenance of the testing machine to ensure the long-term stability and safety of the equipment.

>> Rrh Series Prestressed Hydraulic Jacks for Bridge
>> Children's water motorcycle Bracelet control engine surfboard fashion design electric hydrofoil surfboard water rescue boat
>> Oil pressers Cold Pressed Coconut Peanut Oil Extraction Walnut Oil Press Making Almond Sunflower Bean Oil Pressing Machine
>> High quality medical single head pediatric stethoscope
>> Lide Camera HD Digital Printing
>> Customized Livestock and Poultry Breeding Equipment Galvanized Chicken Cage H Stainless Steel Layer Cage
>> Customs New Gun Shoot Peg/Oil/Powder/Pepper Paintball 0.68 0.5 0.43 Colorful Paintball
>> self-leveling cement, household floor indoor and outdoor leveling and repairing mortar, crack repair agent
>> Titanium Alloy Exhaust Pipe With Manifold Full Set for Porsche Cayman 981 Auto Modification Electronic Valve whatsapp008613189999301
>> Wall Decals Blank Smooth Wallpaper Inkjet Printing Wall Cloth Roll
>> High Precision CNC Machine Tools with Factory Price Molybdenum Wire Cutting EDM Bq500
>> Yeson CE 23L Pressure Steam Sterilizer
>> Madly 5 Series G30 body kits Rear Lip for BMW 5 Series G30 G38 M5 Style body kits Rear Diffuser 2017-2020 Year
>> Automatic Plastic Pet Bottle Blow Molding Machine
>> Multimeter Intelligent High Precision Digital Display Universal Meter Electrician Maintenance Testing Instruments
>> Cm4yd-1 Agriculture Equipment Farm 25 HP Single Row Corn Harvester
>> Cheap Price Recycling Plastic Pet Bottle Crusher Machine
>> Beke Wholesale CNC 6+1 Axis Da66t Hydraulic Press Brake for Sale
>> RO Water Purifier 4 Stages
>> 26301518 Front Suspension Strut for Chevrolet SM2 - All New Generation Chuangku 2020-2021