| Technical Parameter of pvc160-V6 | | | ||
| Description | Unit | PVC160-V6 | ||
| Clamping Force | KN | 1600 | ||
| Opening Stroke | mm | 440 | ||
| Max daylight: | mm | 940 | ||
| Platen size | mm | 705x705 | ||
| Space between | mm*mm | 460X460 | ||
| | | | ||
| Max. Mold Height | mm | 500 | ||
| Min. Mold Height | mm | 160 | ||
| Ejector Stoke | mm | 140 | ||
| Ejector Force | KN | 49 | ||
| Screw Diameter | mm | 50 | ||
| Screw L/D Ratio | | 17.4 | ||
| Injection Pressure | Mpa | 150 | ||
| Shot Volume | cm3 | 403 | ||
| Shot Weight(PS) | g | 360 | ||
| Shot weight(PS) | QZ | 12.7 | ||
| Injection Rate | g/sec | 160 | ||
| Plasticizing capacity | g/sec | 34 | ||
| Screw Stroke | mm | 205 | ||
| Screw Speed | rpm | 165 | ||
| Hydraulic System Pressure | Mpa | 17.5 | ||
| Pump Motor Power | KW | 15 | ||
| Heater Power | KW | 12 | ||
| Oil Tank Capacity | L | 260 | ||
| Machine Weight | Ton | 4.6 | ||
| Machine Dimensions(L*W*H) | m*m*m | 4.80x1.75x1.8 | ||
