Product Details
Product Description
Product Description
| Designation | Dimensions | Mounting dimensions | Basic load ratings | Limiting speeds | Bearing frictional torque
MRL
Nm | Rigidity axial
caL
N/µm | Tilting rigidity
ckL
Nm/ mrad | Mass moment of inertia3)
Mm
kg · cm2 | Axial runout6)
µm | Mass m =kg |
| axial | radial |
Da
max. | da
min. | dyn.Ca | stat. C0a | dyn.Cr | stat. C0r | nG oil | nG grease |
| d | D | H | H1 | H2 | H3 | C | C1 | D1 | D2 | D3 | B | B1 | B2 | r
min. | r1
min. | d1 | J | N | N | N | N | min–1 | min–1 |
| ZARF90210-TV | 90 | 210 | 110 | 69.5 | – | – | 32 | 17.5 | 160 | – | – | 22.5 | – | – | 0.3 | 1 | 8 | 180 | 161 | 130 | 325,000 | 1,030,000 | 98,000 | 210,000 | 1,800 | 700 | 10.5 | 7,700 | 14,500 | 312 | 2 | 13.7 |
Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs
>>
Innovative Energy Collectors Water Heater System for Eco-Friendly Homes
>>
Professional Suppliers for Clean Room 2mm/3mm Thick Anti-Static PVC Floor ESD Roll
>>
High Quality Four Wheels Capacity Steel 150kgs/300kgs Blue Platform Hand Truck Trolley
>>
Sunshine Ss2200 4-Storke Petrol Air-Cooled Hand Start Orange From 1kw-6.5kw 50Hz Gasoline Generator
>>
Custom Foldable Carry on Tactical Luggage Roller Rolling Duffle Trolley Gear Travel Duffel Bag with Wheel for Men Women
>>
Customized 15khz 20khz piezo ultrasonic transducer with weld horn for mask welding machine
>>
Screw Storage Tool Parts Box Competitive Price Plastic Divider Storage Box Plastic Totes
>>
Traffic Lights 300mm Traffic Light Signal Factory Price 8V LED Polycarbonate Traffic Signal Light for Sale
>>
PCBA Batch Type Cleaning Machine
>>
IBC Blender, Bin Blender, Powder and Granule Blender
>>
Automatic burner asphalt mixing plant heavy oil burner precise temperature control to save fuel
>>
Vmc855 Heavy-Duty CNC Vertical Machining Center Machinery Center for Milling Machine Metal Cutting
>>
Powered Air Purifying Respirator PAPR Welding Helmet Mask (WP4000)
>>
The Best Head Light Torch High Power LED 2021
>>
Lisami Cashmere Wool Smooth and Fashion Gorgeous Popular Cloth Dress Fabric Material Textile
>>
for Nintend Gameboy Color Gbc Conductive Rubber Pad
>>
A6 Bluetooth Sports Smart Watch for Android
>>
remote controlled lawn mower robot for sale
>>
Discount Offer! ! ! Diesel Excavator New Chinese F40-35 Mini Small Excavator Tractor Wheel Best Backhoe Loader with Towable for Low Price
>>
High-Precision 6-Axis CNC Drilling and Milling Machine for Deep Hole Metal Work
