Product Details
Product Description
Product Description
| Designation | Dimensions | Mounting dimensions | Basic load ratings | Limiting speeds | Bearing frictional torque
MRL
Nm | Rigidity axial
caL
N/µm | Tilting rigidity
ckL
Nm/ mrad | Mass moment of inertia3)
Mm
kg · cm2 | Axial runout6)
µm | Mass m =kg |
| axial | radial |
Da
max. | da
min. | dyn.Ca | stat. C0a | dyn.Cr | stat. C0r | nG oil | nG grease |
| d | D | H | H1 | H2 | H3 | C | C1 | D1 | D2 | D3 | B | B1 | B2 | r
min. | r1
min. | d1 | J | N | N | N | N | min–1 | min–1 |
| ZARF60150-L-TV | 60 | 150 | – | – | 103 | 72 | 22.5 | 12.5 | 105 | 90 | 105 | 17.5 | 38.5 | 16 | 0.3 | 0.6 | 6 | 123 | 106 | 88 | 187,000 | 550,000 | 44,500 | 92,000 | 2,700 | 950 | 4.2 | 5,300 | 4,300 | 54.5 | 1 | 5.35 |
Needle roller/axial cylindrical roller bearings (With fixing holes Without fixing holes)
Features
Needle roller/axial cylindrical roller bearings comprise an outer ring with radial and axial raceways, shaft locating washers, an inner ring, a radial needle roller and cage assembly and axial cylindrical roller
and cage assemblies. The bearings are available in versions with or without fixing holes.
Radial and axial load carrying capacity
In addition to radial forces, the bearings can also support axial forces from both directions and tilting moments.
Preload and internal clearance
The outer ring, inner ring and axial cages are matched to each other such that the bearing is axially clearance-free after preloading by means of an theprecision locknut. The radial internal clearance conforms to Group 2 in accordance with ISO 5753-1 .
Bearings for screw mounting
Needle roller/axial cylindrical roller bearings ZARF(L) have holes in the outer ring. These are used for screw mounting directly on the adjacent construction or in a radial locating bore Figure 1.
Due to screw mounting of the outer ring, the cover that would otherwise be required and the matching work can therefore be dispensed with. The bearings are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
With seal carrier assembly
In the interests of a simpler design, a seal carrier assembly DRS, Figure 1 is recommended. The seal carrier assembly is centred on the outer ring and seals the bearing against outside influences.
ZARF..-L
Figure 1 Stepped shaft locating washer with sealing ring
1.Seal carrier assembly DRS
2.Locknut AM
3. Stepped shaft locating washer extended on one side
4. Rotary shaft seal DIN 3760-..-NBR
With stepped shaft locating washer
ZARF..-L has a stepped shaft locating washer extended on one side, Figure 1. These series are used in preference where the shaft locating washers are not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Heavy series
ZARF(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Bearings not for screw mounting
Bearings ZARN(L) are mounted in a housing bore and the outer ring is located using a cover, Figure 2. They are preloaded against the shaft shoulder by means of a locknut AM or ZM(A).
ZARN
Figure 2
Bearing outer ring located using cover
With stepped shaft locating washer
ZARN..-L has a stepped shaft locating washer extended on one side, Figure 3. This series is used in preference where the shaft locating washer is not adequately supported axially by the shaft shoulder or the bearing unit cannot be sealed on the outside surface of the normal shaft locating washer due to space conditions in the adjacent construction.
Figure 3
ZARN..-L
1.Stepped shaft locating washer extended on one side
2.Rotary shaft seal DIN 3760
Stepped shaft locating washer with sealing ring
Heavy series
ZARN(L) is also available in a heavy series. This series has a larger cross-section for the same shaft diameter and therefore higher basic load ratings.
Operating temperature
The bearings are suitable for temperatures from –30 °C to +120 °C.
Suffixes Suffixes for available designs, see table.
Available designs
>>
Digital Rebound Test Hammer
>>
Plastic Laser Marking Machine 20W Color Fiber Laser Marking Machine Fiber Laser Marking Machine Customer
>>
20kHz Ultrasonic Lace Sewing Machine Welding Surgical Suits Trimming
>>
Customized Disposable Bamboo Japanese Tensoge Chopsticks With Individual Full Paper Wrapper
>>
Topcn 50L 100L Perfume Filter Freezing Mixing Making Chilling Machine
>>
3gallon/5 Gallon/20L Pet Bucket Blow Moulding Machine/Machinery/18.9liter/20liter Plastic Water Barrel Making Machine/Machinery
>>
UNIOP BKDC-16-0045 in stock
>>
Large M7130 Steel Hydraulic Surface Grinding Machine Tool Grinding Machine
>>
High-Quality CNC Vertical Lathe Disc Precision Machining CNC Machine Tool
>>
Car Engine Assembly G4fa G4FC G4na G4nb G4ke G4kd G4fd G4fg G4nc G4kj G4kh G4fj G4la G4LC Bare Long Block for Hyundai Motor 4 Stroke Petrol Gasoline Engine
>>
Ningbo Sanzhaoda Motorcycle Scooter brass/zinc Tubeless Tire Valves pvr32 Motocicleta valvula PVR30 PVR32
>>
Korean Ladies Bicycle Lovely Girls Bike Adult Wbb15124
>>
High Quality Dewatering Box for Paper Making Machine
>>
Barway 4.7inch Handheld Android Barcode PDA for Logistics Warehouse
>>
The Used 210L Liquid Nitrogen, , Liquid Argon Duwa Tank Was Produced
>>
Fully Automatic Friction Wheel Machine for Evenly Cutting Blocks
>>
Printing Restoring Function OEM ODM Classic Church Chair
>>
Wholesale Dried Light Speckled Kidney Beans (ROUND SHAPE) 170-180 for Food
>>
High Torque, Fast Charging, Night Work Light, Single Battery, 1 Hours Charger Cordless Impact Wrench in Blue with BMC Packing for Easy Carry (CDW010)
>>
100m3 Liquid Carbon Dioxide Large LNG Storage CO2 Tank
