1. Type: flux cored welding wire for hardfacing/surface welding/cladding
2. Diameter: 1.2 mm, 1.6 mm, 4.0 mm, customized.
3. Standard: GB
4. Certification: ISO9001:2008, ISO14001:2004, OHSAA 18001-2007
Model
| Diameter
[mm]
| Hardness
[HRC]
| Main Ingredient
[%]
| Main application and characteristics
|
D688
| 1,2;1,6
| 50-58
| C: 2.5-5.0 Cr: 22.5-27.5
| Apply to a serious part of grinding wear surfacing, multi-layer welding. Surfacing layer thickness can be up 50 mm
|
D788
| 50-60
| C: 3.0-4.5 Cr: 24-30
| Apply to a serious part of grinding wear surfacing welding, welding layer thickness control under 20 mm
|
D888
| 58-65
| C: 3.5-4.5 Cr: 24-27.5
| Apply to a serious parts of abrasive wear surfacing welding, welding layer thickness control under 10 mm
|
D788A
| 50-60
| C: 3.0-4.5 Cr: 20-25
| Apply to a serious parts of abrasive wear surfacing, limited to single layer welding.
|
D788M
| 60-66
| C: 3.0-4.5 Cr: 24-30
| Apply to a serious parts of abrasive wear surfacing
|
D688
Welding Rod
| 4.0
| 50-58
| C: 2.5-5.0 Cr: 22.5-27.5
| Suitable for severe abrasive wear parts hardfacing welding, surfacing layer thickness control under 20 mm
|
