Bridge Prestressed Anchorage Porous Anchorage Bridge Anchorage Clip

Product Description

The technical standards
1. The varieties, specifications and quality of prestressed tendons, anchors, fixtures and connectors meet the design requirements and the provisions of the current national standards.
2. The prestressed tendons shall be smooth without bending;There are no cracks, spines, mechanical damage, iron oxide and grease on the surface.
3. The shrinkage of clamping clips of clamping anchors shall be no more than 6mm, and the friction loss of anchor mouth and horn mouth shall be no more than 6%.
4. The anchor meets the requirements of graded tensioning, reinforcing tensioning and relaxing prestressing tendons.For post-tensioning structure, grouting hole or vent are set on the anchor or its accessories. The grouting hole location and aperture meet the requirements of grouting process, and there is a structure connecting with the grouting pipe.Connection structure shall be provided on the anchor or its accessories when the closure cover is used.
5, the fixture has good self-anchor performance, loose anchor performance and reuse performance.Clamps that need to be struck to loosen must ensure that they have no effect on the anchorage of prestressed tendons and ensure the safety of operators.
6. The material performance indexes of anchors, fixtures and connectors shall not be lower than no.45 steel, which shall meet the design requirements, and shall have certificates of mechanical performance and chemical composition and quality guarantee.
7. For anchors used to anchor steel strand with a diameter of 915.2mm, the minimum diameter and thickness of anchor plates with holes 1 to 21 conform to the following table, and the anchor plates with holes 22 and above can be implemented according to the design document.
Minimum diameter and thickness of 1 ~ 21 hole anchor plate

The anchor hole	Anchor plate size (mm)		The anchor hole	Anchor plate size (mm)		The anchor hole	Anchor plate size (mm)
	diameter	thickness		diameter	thickness		diameter	thickness
1	48	48	8	136	55	15	186	68
2	86	50	9	146	55	16	196	70
3	91	50	10	156	58	17	196	73
4	102	50	11	166	58	18	206	75
5	112	50	12	166	60	19	206	75
6	126	52	13	170	63	20	226	80
7	126	53	14	176	65	21	226	80

8. For anchors used to anchor steel strand with a diameter of 915.2mm, the edge distance of anchor plate at the outer edge of the large mouth of the outer cone hole of the anchor plate shall be no less than the following table.
The minimum distance of the outer edge of the outer edge of the outer cone hole of the anchor plate

Number of holes	The minimum distance
1~5	11.0mm
6~12	13.0mm
13~17	15.0mm
18~21	17.0mm

9. The depth of the limit plate groove of clamp-type anchor shall match the diameter of steel strand.
10. Inspect appearance and dimension, hardness and static load anchorage performance of anchors, fixtures and connectors in batches and quantities before use.Work anchors and tool anchors shall not be substituted for each other.
11. Anchor backing plate shall have sufficient stiffness and strength. The length shall ensure that the maximum folding Angle of steel strand at the bottom opening of anchor is no more than 4°, and the flatness of end face is no more than 0.5mm.
-----------------------------------------------------------------------
The anchoring system of spheroidal graphite cast iron integrated anchor is designed for unbonded PC strand based on the application of PC strand anchorage in recent 20 years in China.Its feature is that the anchorage at the tension end adopts the spheroidal graphite to integrate the bearing plate and anchor head.It has compact structure and reliable anchoring, Its performance meets the national requirements of GB/t14370-2000, and it is also applicable to 2000MPa PC strand.In addition, the biggest advantage of the anchoring system is that the full length of PC strand can be fully sealed.

---

>> OEM 13ah 45kph (Pedal+ accelerator) Electric Bikes Bike Custom Battery Ebike E Bicycle
>> Large Organization 2-Tier Stainless Steel Kitchen Storage Dish Drainer Drying Rack
>> Natural PEEK plastic bar/ solid PEEK rod for engineering plastic
>> CNC Drilling and Milling Machine Gantry Machining Center
>> NICU insulation monitoring device for IT system healthcare isolation power supply cabinet
>> Custimized Color GRP Grates Making Machine China Factory 12*12mm 1/9 Mesh FRP Molded Grating Machine
>> Coil to Coil Grinding/Polishing Machine
>> ADEPN8040 SMT Fuji XP141 Nozzle 1.3 Nozzle for pick and place machine
>> Bubble Tea Powder
>> Vacon Ac Drive 181B4318
>> Factory Price Dx51d/Dx52D/SGCC/JIS G3312 Gi Steel Zinc Coated Galvanized Steel Coil for Roofing, Building
>> Agricultural Baling Gearbox Klf-Fk263 Hay Vertical Square Baler Gear Box
>> 1mm Gold and Silver Cutting Fiber Laser 50W Deep Engraving Machine
>> CNC Lathe Cutting Machine for Metal Bar
>> 60V 72V 100ah 200ah 150ah 170ah 190ah E-Bike Battery Pack Customization Lithium-Ion Battery for Electric Tricycles Electric Scooters
>> a Type Stable Automatic Chicken Cage Equipment
>> Custom Sliding Slide Paper Cardboard Iridescent Hologram Holographic Drawer Caixa De Presente Caja De Regalo Box Packaging Drawer Gift Paper Box
>> Hydraulic Clamping Radial Drilling Machine The Arm Length 1300mm Z3050 Radial Drill Machine
>> Very High Quality Used Murata Qpro Auto Coner Machine 2015 Year, 60 Spindles with Q3 Clearer in Good Working Condition
>> High Quality Stainless Steel Steam Pressure Reducing Valve Gas Regulator