Product Details
Product Description
Product Description
STA-125 Thermal Analysis Instrument Introduction
The Simultaneous Thermal Analyzer (STA) combines Thermogravimetric Analysis (TG) with Differential Thermal Analysis (DTA) or Differential Scanning Calorimetry (DSC) to obtain thermogravimetric and differential thermal information simultaneously by using the same sample in the same measurement. The STA is equipped with various heating furnaces and accessories with different characteristics, covering the vast majority of materials, including plastics, rubber, synthetic resins, fibers, coatings, oils, ceramics, glass, cement, refractory materials, metals and alloys, fuels, explosives, pharmaceuticals, food, etc.
STA-125 Thermal Analysis Instrument Features
1. Can automatically control the furnace up/down with accurate positioning, can ensure data reproducibility.
2. By heat flow DSC data gathering way to get the energy and temperature curves.
3. Operators can use standard samples to calibrate the accuracy of temperature, energy, and thermogravimetric.
4. Atmosphere control system uses the Mass Flow Controller (MFC); the triode voltage regulator and steady flow gas can be automatically switched in the process of experiment with high precision, good repeatability and quick response.
5. From the microscale to largescale samples can be tested (up to 5g); Can meet the test requirements of various samples under different conditions.
6. All testing procedures be completed automatically, the software can get data like DTA (differential thermal analysis), TG (thermal gravimetric), DTG (derivative thermogravimetric), DDTG, DTA peak area, thermal enthalpy, kinetic parameter, glass transition temperature, specific heat, activation energy and so on.
7. Can take screenshots during testing at any moment, will automatically change the range according to the output signal.
8. The large-screen LCD displays the status and data of the instrument in real time. There are two sets of thermocouples. One set of thermocouples displays the furnace temperature in real time (whether the heating furnace is working or not) and the other set of thermocouples displays the sample temperature during operation.
9. According to the calculation formulas or calculation methods provided by users, we can provide corresponding calculation software in a timely manner.
10. Self-developed constant temperature controller; constant temperature gas chromatography and mass spectrometry connectors; constant temperature belt; can fully ensure the secondary detection of tar and various reaction gases.
STA-125 Thermal Analysis Instrument Specifications
The abscissa axis can choose temperature or time as the scale.
|
Can choose absolute weight or percentage as the scale for the ordinate axis.
|
Can be maintained at 1250 degrees or 1550 degrees for 72 hours.
|
LCD real-time display of furnace temperature, sample temperature, quality, gas path status, etc.
|
Can plot step cooling curve.
|
Kinetics of crystallization calculation.
|
DSC (differential scanning calorimetry) Data
|
DSC Measuring Range:
| ±1mw～±500mw
|
DSC Precision:
| ±0.1μw
|
Temperature Data
|
Models Selection by Temperature Range:
| STA-115: RT to 1150℃
STA-125: RT to 1250℃
STA-145: RT to 1450℃
STA-155: RT to 1550℃
|
Temperature Accuracy:
| ±0.1℃
|
Heating Rate:
| 0.1℃/min - 100℃/min
|
TG (thermal gravimetric) Data
|
Measuring Range:
| 1-200mg (0-5g option)
|
Resolution:
| 0.1μg
|
Thermogravimetric Noise:
| ＜0.1μg
|
Vacuum Degree:
| 2.5×10-2Pa (option with vacuum system)
|
Atmosphere Control System:
| Using mass flow controller (MFC), for corrosive gas can be customized.
|
Thermostatic Control System:
| constant temperature range: RT - 400 ℃
support extension:
STA-GC (gas chromatograph)
STA-MS (mass spectrometry)
STA-FTIR (fourier transform infrared reflection)
|
DTA (differential thermal analysis) Data
|
Measuring Range:
| ±10μv to ±2000μv
|
DTA Resolution:
| 0.01μv
|
Crucibles:
| standard: ceramic crucible 0.06ml or 0.12ml
option: platinum (Pt), aluminum, graphite and quartz crucible
|
>>
Chinese products medical appliance invisible hearing aids for sale
>>
New Arrivals High Quality Slim Fit Denim Pant Cotton Amiry Jeans Distressed Wash Highstreet Ripped Purple Men′s Jeans D2
>>
250HP 60HP 190HP 300HP 150HP Agricultural Tractor Loader Fuel-Efficient Combustion Trenching Tractor Rear-Mounted Mower Deck Ready Terrain-Responsive
>>
HC-W024 Mindray spare parts BS200 220 300 320 330 350 Biochemical analyzer filter 578NM 630NM 670NM indray accessory
>>
HTC 4 Axle New Heavy Equipment Lowbed Trailer Truck Semi Trailers with 80/100 Ton From China
>>
China Resonable Price Centerless Grinding Machine Cylindrical Grinder for Shafts
>>
Fashion High Quality Metal Silver Decoration Bells
>>
new products trending 2022 Emergency Solar power Hand Crank AM FM NOAA Radio/Flashlight dynamo Portable mini walkman Radio
>>
Weatherproof Outdoor Mail Box-Secure Parcel Box for Packages
>>
Hydraulic Oil Suction Filter Excavator Parts 803423776 for XCMG XE490
>>
Inverted Bucket Steam Trap (STDXTH-882)
>>
Sports Winter Jacket Wish Mens Pilot Jacket Winter Fleece Jackets Warm Thicken Outerwear Plus Size Coat
>>
I9 11th/12th/13th Generation Memory 32GB Hard Drive 128GB/256GB/512GB/1t Windows10/ Linux OPS PC
>>
Fwincnc CNC Metal/Stainless Steel/Carbon Plate Portable Fiber Laser Cutter Cutting Machines
>>
71550 Hydraulic AC Hose Crimper Crimping Tool Kit for Conditioner Automotive Repair
>>
Sheet Metal/5-Axis CNC Turning Precision Machining/Aluminum/Stainless Steel/Automobile/Punching Parts/Laser Cutting Welding/Stamping Manufacturing
>>
Heavy-Duty 74 Vertical Drilling Machine with Pneumatic Functionality
>>
Automatic Dual Spindle Oturn CNC Turning Lathe Machine Ety150ms2
>>
60 Staggered Round Holes Stainless steel 304 perforated mesh plate
>>
Other performance parts Bus spare parts ZK6127HS9 tie rod end 2930-00247 bus parts tie rod assembly accessories
