Tony 2024 New Design Biofuel Pellet Machine Wood Pellet Machine

Product Description

Tony 2024 New Design Biofuel Pellet Machine Wood Pellet Machine Company Profile
TONY--- Professional Manufacturer of Pellet Machines
Shandong Tony Environmental Protection Technology Co., Ltd is an intergrated enterprise spechializing in developing,anufac-turning and intenational trade of pellet equipment for over 20 years.Main products are biomass ring die and flat die pellet machine,biomass pellet line,feed pellet machine,drying,crushing equipment,cooling screening,mixing and environmental protection equipments. TONY main processing areas are logs or furnature waste,agricultural crop stalks,animal feces and so on. Looking to the future, we sincerely hope to establish a long-term reliable cooperation relationship with clients all over the world.
DESCRIPTION:
TONY wood biomass pellet machine is a new biomass fuel production machinery by using crushed sawdust . Compared with the old machine, it obsorbed the essence of horizontal ring die and flat-die Pellet Mill Machine, solved the insufficient pressure, die crack problems of horizontal ring die pellet machine, and overcame the small capacity, high failure rate of flat die wood. pellet making machine.

Model	Power(KW)	Capacity(T)	Weight(T)	Size(mm)
TYJ551-II	90-110	1-2	5.5	2364*1550*1705
TYJ551-III	132	2-2.5	5.5	2364*1550*1705
TYJ760-III	160/185/200	2.5-3.5	9	2564*1750*2150
TYJ860-III	220-250	3-5	13.5	2664*1950*2150

Raw material: wood, waste wood and straws, etc. such as woodchips(palm, pine white pine, mahogany, pinus sylvestris, rubber tree), bamboo shavings, rice hust, seeds shells, peanut shells, halm, pennisetum, wheat straw, corn stalk, cotton stalks, alfalfa grass, bagrass, palm fiber, waste paper, non-physical material
Size:2-4mm (All the raw materials must be crushed into sawdust before going
to wood pellet machine.If not, you may need a wood chipper, wood crusher.)
Moisture: Generally, 10-15% is best for producing good quality wood pellet.
Advantage
How to design Wood log pellet line?
wood log is the most common raw material for making wood pellets.
So, how to design a suitable wood pellet production line with wood log as raw material?
First, a drum wood chipper is used to chip wood log into small size wood chips with 2.5-3.5cm.
After that, hammer mill/wood crusher is used to grind wood chips into sawdust (6-12mm).
Sometimes, a dryer is need ,as usually the MC of wood log is always about 30-50%,Under this condition, a dryer is need.
Then, a vertical ring die wood pellet mill machine is used to press dried, wood sawdust into good quality wood pellets.
TONY CASE
The advantages of buying equipments in our company are: 1. a full range of design, construction, equipment supply, construction, installation supervision and commissioning, staff training;
2. license for the design, construction, installation, wiring, and other works;
3. full certification of equipment;
4. officially registered trade mark;
5. full warranty, post warranty and service;
6. warranty on all equipment - 13 months;
7. ratio price-quality-assurance;
8. vast project experience. we have established and put into operation so many of pellet plant productivity on the finished product from 0.5 to 20 t / h in Malaysia, Thailand, Vietnam, Germany, France, Bulgaria, Serbia, Romania, Korea, Australia etc;
9. large stock of finished equipment and spare parts;
10. all equipment of our production, equipped with electric motors and gearboxes, that made in big company
TONY CERTIFICATE
Questions asked Frequently Q: What is a pellet mill/pellet machine?
A: A pellet mill/pellet machine is a machine that takes raw materials and shapes it into pellet form for multiple uses.
Q: What kind of materials can be pelletized?
A: Materials such as wood wastes, saw dust, corn cobs/stover/stalks, straw, switch grass, other grasses, distillers grain, paper, etc. Basically, most Biomass materials that can be ground down to sawdust form can be pelletized.
Q: What are pellets used for?
A: Pellets are used mainly for heating, animal feed, and animal bedding. Many other applications may apply.
Q: What size does my material need to be, to run through the pellet mill?
A: All materials must be 5mm or less.
Q: What size pellets can I make?
A: We have dies sizes from 4mm-12mm, depending on the machine or your raw materials.
Q: Do you ship worldwide?
A: Yes. We have sent machines to Canada, Europe, Asia, Southeast Asia, Africa, South America, Ireland and Australia.
Q: If I purchase a pellet mill, will you show me how to make pellets?
A: Yes, we do. We will instruct you how to use it via video or phone or engineer avaliable abroad if you need.

---

>> Skdii High Quality Blades Customized PC600 PVC Pet PP HDPE Recycled Waste Blocks/Pipes/Profiles/Bottles/Films Plastic Crusher/Crushing Machine
>> 2022new Type Honeycomb Lamination Machine
>> Europe Italian home use small stufa pellet making mill machine price
>> PVC Inflatable Aircraft Transportation Model Custom Inflatable Airplane Replica Display
>> PARKER proportional directional valve D31FCE02DC1NB70
>> Water-Based Super Gloss Coating/Varnish for Paper Printing W870A
>> MD-Single Screw Puff Extruder for Sales
>> Precision-Engineered Hydraulic System Valves for Reliable Fluid Control
>> Custom Pop up Gazebo 3m X 3m with Sides Pop up Tent Iron 4X4 20X20 Event Shelter Gazebo Marquee for Event Center Folding Gazebo 3X6 with Walls and Church Window
>> Hmc630 5 Axis CNC Milling Machine Horizontal Machining Center Machine
>> 10kN 20kN 30kN 50kN 100kN Computer Control Universal Tensile Testing Machine
>> CNC Twin Head Milling Machine for Stainless Steel Plate-CNC Moulding Machine
>> SS304 Mixing Tank 200L Paint Mixer
>> Large Stock 100% Remy Human Hair Lace Front Wigs
>> Xingu Latest Design 100X100 Cm Faux Artificial Vertical Garden Green Wall
>> High Efficiency Two Shaft Shredder Machine for Sale of Dt Machinery
>> China Railway/Truck Express Shipping to Russia/Kazakhstan/Belarus/Kyrgyzstan
>> Electric Heating and Vibrating Waist Lumbar Massage Support Belt Three-Speed Temperature Control
>> YCJH Clutch disc 3713266M1 3580946M2 331021210 Used for MASSEY FERGUSON
>> Hf Welded/ ASTM Standard Tube Mill