| US$20.00-50.00 | 100 kg (MOQ) |
| Material: | GR1, GR2, GR3, GR4, GR5, GR5ELI,TA1,TA2,TA3,TA7,TA9,TA10,TC4,TC4ELI,TC6,TC9,TC10,TC11GR1,GR2,GR3,GR5,GR6,GR7,GR12,GR29,Ti6242 ,Ti662 ,Ti6246 ,Ti5Al2.5sn ,Ti6Al7Nb |
| Standard: | ASTM F67, ASTM F136, ISO5832--3:1996(E),GB/T2965-2007,GB/T13810,Q/BS5331-91ASTM B348,AMS4928 |
| Size: | ¢(3.0~200) mm *(500~4000)mm |
| State: | M |
| Surface Condition: | hot rolled/forged/peeled bright finish,Polishing; Lathing |
| Tolerance: | ±0.1~±2MM |
| Straightness: | <= 0.5mm/m |
| Surface Roughness: | Ra 0.8~1.6 |
| Grade | N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti |
| Gr1 | 0.03 | 0.08 | 0.015 | 0.2 | 0.18 | / | / | / | / | / | Bal |
| Gr2 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | / | / | Bal |
| Gr3 | 0.05 | 0.08 | 0.015 | 0.3 | 0.35 | / | / | / | / | / | Bal |
| Gr4 | 0.05 | 0.08 | 0.015 | 0.5 | 0.4 | / | / | / | / | / | Bal |
| Gr5 | 0.05 | 0.08 | 0.015 | 0.4 | 0.2 | 5.5-6.75 | 3.5-4.5 | / | / | / | Bal |
| Gr7 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | 0.12-0.25 | / | / | Bal |
| Gr9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5-3.5 | 2.0-3.0 | / | / | / | Bal |
| Gr12 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | 0.2-0.4 | 0.6-0.9 | Bal |
| Material | Tensile strength MPa | Elongation % | Reduction of Area % |
| GR1 | >=240 | >=24 | >=30 |
| GR2 | >=400 | >=20 | >=30 |
| GR3 | >=500 | >=18 | >=30 |
| GR4 | >=580 | >=15 | >=25 |
| GR5 | >=895 | >=10 | >=25 |
| GR5ELI | >=825 | >=8 | >=15 |
