
| US$25,000.00-28,500.00 | 1 Set (MOQ) |
| Se-230T/IP Plastic Injection Molding Machine Information | |||||||||
| Item | Unit | A B C | |||||||
| Screw diameter | mm | 60 | |||||||
| Theoretical shot volume | cm³ | 707 | |||||||
| Shot weight (PET) | g | 820 | |||||||
| Shot weight (PET) | oz | 28.9 | |||||||
| Length/Diameter ratio | L/D | 25 | |||||||
| Injection pressure | Bar | 1293 | |||||||
| Injection rate | cm³/sec | 361 | |||||||
| Max.screw speed | rpm | 200 | |||||||
| Clamping force | KN | 2300 | |||||||
| Max.daylight | mm | 820*770 | |||||||
| Open stroke | mm | 520 | |||||||
| Space Between Tie-bars | mm | 570*520 | |||||||
| Min mould dimension | mm | 220 | |||||||
| Mould thickness range | mm | 570 | |||||||
| Ejector force | KN | 90 | |||||||
| Ejector stroke | mm | 150 | |||||||
| No.of ejector pins | unit | 9 | |||||||
| Max.motor power | KW | 30 | |||||||
| System pressure | MPa | 175 | |||||||
| Heater input power | KW | 22 | |||||||
| Oil filling capacity | L | 200 | |||||||
| Machine size | M | 6.2*1.4*2.2 | |||||||
| Net weight | KG | 7300 | |||||||