DC3V Battery Independent Smoke Sensing Alarm Detector Standalone Fire Alarm System

Product Description

Stand Alone Photoelectric Smoke Detector Fire Alarm High Sensitivity Easy Installation for School Factory Secure Smoke Sensor
Product Description The independent photoelectric smoke detector is a high-performance photoelectric sensor with special structure design, the use of well-known chip manufacturers proprietary chips and photoelectric sensing components, automatic SMT process production, with high sensitivity, good stability, low energy consumption, beautiful and durable, easy to install and so on. The product is suitable for fire detection and alarm in schools, factories, shopping malls, warehouses, homes and other places.,
Detailed Photos
Product Parameters Basic Parameter:

Model number	JTY-GD-CB1310
Operating voltage	DC 3V (2 pcs 1.5V batteries )
Work current	≤10uA
Alarm currant	≤200mA
Battery	No. 5 Mercury-free batteries 1500mAh/1.5V
Work temperature	-10---+50
Work humidity	≤95%RH(40±2)
Smoke alarm	Audible and visual alarm
Alarm Sound Level	80 dB (3 meters distance)
Battery low voltage alarm	Audible and visual alarm
Detection area	≤80 square meter
Material	Fire-proof plastic
Installation	Ceiling mounted
Dimension	Φ105*61mm
Weight	162g (with battery)

Product Dimensions:
The protection area and radius of the detector required in the installation environment are shown in the table:

			Protection area A and protection radius R of a detector alarm
Types of fire detection alarms	Ground area S(square meter)	Room height H(m)	Roof slope α
			α≤15°		15°<α≤30°		α>30°
			A	R	A	R	A	R
			square meter	m	square meter	m	square meter	m
Smoke detection alarm	S≤80	H>12	80	6.7	80	7.2	80	8.0
	S>80	6<H≤12	80	6.7	100	8.0	120	9.9
		H≤6	60	5.8	80	7.2	100	9.0

Application Scenarios Matters Need Attention This product is not suitable for installation and use:
1. Places with smoke retention under normal circumstances.
2. large dust, water fog, steam, oil fog and other pollution places.
3. Places with relative humidity greater than 95%.
4. Places with ventilation speed greater than 5m/S.
This product is not suitable for installation and use:
1. Places with smoke retention under normal circumstances.
2. large dust, water fog, steam, oil fog and other pollution places.
3. Places with relative humidity greater than 95%.
4. Places with ventilation speed greater than 5m/S.
Maintenance:
The detection alarm shall be cleaned and maintained at least every 12 months after installation to keep the base and maze clean, and no dust and other debris can enter the maze to affect the normal work of the detection alarm.
Transportation and storage:
1. Transport and storage according to GB/T 15464-1995 "General Technical Conditions for Instrument Packaging".
2.during the transportation and storage process, the original packaging and seal of the manufacturer must be kept intact, and the product is not subject to severe impact.
3.Drastic changes in ambient temperature should be avoided.

Packing instructions:
1. Packing: 50 pieces
2, packaging box: 1 detector alarm, 2 expansion tubes, 2 self-tapping screws, 1 bag of desiccant, 1 manual, 1 certificate, 1 bag.
Installation Instructions 1. Base installation: Drill two mounting holes 58mm apart from the ceiling, drive into the expansion tube, and then fix the base A and B of the alarm with self-tapping screws (see Figure 3). The expansion tube and self-tapping screws come with the packaging.
2. Battery installation: Open the battery cover of the detection alarm, and install the battery according to the positive and negative poles marked in the battery box (see Figure 4). After the battery is installed, press and hold the self-test button of the detector and observe whether the alarm emits an audible and visual alarm. If the alarm is abnormal, check whether the battery is installed correctly.
3. Installation of detector and base: After the detector and base are aligned, turn the detector clockwise and observe the line alignment between the detector and base, that is, the installation is complete.
More Products
Company Profile

---

>> Auto Parts Car 13248475 13444859 13347453 26290303 Engine Mount for Chevrolet Cruze 1.4L 1.8L 2011-2015
>> 2023 Latest Q647mfh Ash Discharge Fixed Ball Valve
>> EQ153 truck Right off hook cover 8406039-C0100 8406040-C0100
>> Customized 3646201 Used For AUTO Cars
>> Flexible Impeller Pump Lamella Pump Lp 25 Price
>> 12 Grids Empty Storage Box Rhinestone Acrylic Crystal Beads Jewelry Decoration Container
>> Ruida Manufacturing Rd-Cq-850 Digital Business Card Die Cutting Press Machine
>> 2022 NEW Portable Painless 3D 4D 5D 7D 8D Machine Face Lifting Anti-wrinkle Machine Body Slimming Machine
>> Exercise Sports Outdoor Fitness Equipment Elliptical Exerciser Playground Gym
>> High-Efficiency Grain Dryer, Large-Capacity Operation, High Efficiency and Fast Speed.
>> Suitable for residential and commercial environments programmable ventilation system intelligent controllers
>> Spherical roller bearings 23180CA/W33 400*650*200
>> Outdoor Camping Multi-Layer Aluminum Alloy Foldable Portable Storage Rack
>> Gantry Tenon and Mortise Machining Center
>> FUJI Small Cargo Ware House Freight Price Cargo Freight Elevator
>> Cheap Custom Bedroom Animal Bear Slippers
>> HTPV02 Anti - scratch testing machine for assembly back plate Cut susceptibility teseting machine testing equipment
>> Bywell brand PCR car tyre BL508 Passenger Car Tire 195R14C 195R15C
>> 2024 Printing Presses Gearbox Reducer Aluminum Case
>> camping gas burner,portable gas stove for picnic