Product Details
Product Description
Product Description
A mechanical vapor recompression (thereinafter abbreviated MVR) evaporator is a evaporation and concentration equipment, recycling the secondary steam completely with compression.
Application Scope
The MVR evaporator is suitable for concentration and crystallization of various material, especially for material of small boiling point elevation and diluted material which are easy to be evaporated.
Main Principle
The MVR (mechanical vapor recompressor) is able to take use of the secondary steam produced in the evaporator. After compressed by the recompressor, both pressure and temperature of the secondary steam are increased, and the caloric capacity increased as well, then it is sent to heating chamber of the evaporator as heat source for heating up material inside. In this way, the waste steam is fully reused, the heat efficiency is increased, the demand for external heat supply and cooling water decreases, and the engery consumption is reduced.
System Configuration
A MVR evaporator is composed of heaters, separator (crystallizer), MVR, vacuum pump, material circulating pumps, operation platform, instrumentation and control cabinet, and pipline and fittings.
MAIN FEATURE
1.MVR Evaporator is the international advanced evaporator, a tiny amount of live steam is required (the tiny amount of steam is required for startup, and then almost none is needed for normal operation), reduces the operation consumption and the enviromental pollution.
2.Compared to the traditional evaporator, the temperature difference is smaller because the heat source is provided by the compressor, thus the evaporation is gentler, which improves the product quality greatly and reduces the scale.
3.No need of condenser or a small condenser is workable, the structure and the process flow are simple, easy to realize full automation, safe and reliable.
4.There is built-in CIP cleaning pipeline, is able to realize on-site cleaning, which is easy to operate, and free of blind spot.
5.The material is evaporated under condition of low temperature (evaporation temperature @ 50℃～100℃) and free of foam. The material is uniform and not easy to coking or denaturation.
6.The installation space of MVR evaporator is about two times that of the traditional multi-effect eavporator, the investment cost is higher too, and operation cost is much lower.
7.In order to avoid failure of MVR caused by misoperation, automatic operation system is necessary for protecting safe operation of equipment.
TREATMENT CAPACITY
Customized according to demands, 0.1~200.0ton/hour.
MAIN FEATURE
MAIN FEATURE
MAIN FEATURE
>>
Saddle Move Type Hyraulic Automatic 4080 Surface Grinding Machine M7140A 400X800
>>
Silicon Rubber Foldable Collapsible Funnel For Water Bottles and Kitchen
>>
Other performance parts 1300-00390 China Bus ZK6122H9 ZK6127HS9 12v Fan electromagnetic tooth clutch 1300-00390
>>
0.1ml 0.2ml Thin-Wall Sterile PCR Tubes for Laboratory Using
>>
Portable mobile alluvial gold washing tromel screen for Ghana Australia
>>
800W Portable Concrete Mixing Machine
>>
Gimbal Intelligent Tracking High-Resolution Thermal Imaging Three-Axis Stabilized
>>
India black granite monument from granite quarry and factory
>>
Geforce Rtx 3070 Eagle 8g Graphics Card 3070, 3080, 3090
>>
Computerized Chain Stitch Looper Type Quilting Machine
>>
SAE J1127 Sgx DC Automotive Battery Cable 4ga 6ga 8ga 1/0 AWG Red Black Copper Battery Power Cable Wire
>>
Metal Roofing Sheet Price Stone Coated Metal Roof Tile Sheet Aluminium Zinc Roofing Materials
>>
Leather 3 Finger Hand Protector Gear Hunting Archery Thumb Ring Shooting Gloves
>>
ZBL-R660 Concrete Scanner Wall Thickness Meter Cover Meter
>>
Bedding Recovery System Cow Manure Handling Master
>>
High Roundness Glass Beads Used for Road Marking Reflective
>>
Airtac Solenoid Valve B03 Series
>>
API 6A Oilfield Spacer Adapter Spool Casing Tubing Spool Drilling Spool
>>
IP67 LED Sports 600W Built in Surge Suppression with Max 40kv Football Field Stadium Light Fixtures Field LED Flood Light
>>
High Quality Tungsten Carbide Components for Petroleum and Gas Industry
