Product Details
Product Description
Product Description
Characteristics and characteristics of breathable steel
Features:
1. Small specific gravity, high specific strength.
2. Good energy absorption.
3. Good vibration control effect.
4. Large specific surface area. A quarter of the tissues are through holes.
Model: PM-35-7μ m (small pores of 7μ m), PM-35-25μ m (medium pores of 25μ m) and PM-35-35μ m (large pores of 35μ m)
Physical properties of breathable steel
Model PM-35
Average pore diameter 7micro; -3µ m
Gasification amount ~ 25%
Density of 6.3 ~ 6.5g/cm
The linear expansion coefficient (at 20 ~ 150ºC) is 12.0 ~ 12.5 * 10ºC
The heat transfer coefficient (at room temperature) is 0.07 ~ 0.08 cal/cm.sec.ºC.
Buckling strength KGF/mm 70 ~ 75
Tensile strength kgf/mm 45 ~ 50
Hardness (HV) 350-400
Good processability.
Features:
1. Reduce the injection pressure, reduce the molding and holding time.
2. Reduce and eliminate the internal stress of molded parts to prevent the deformation and warping of products.
3. Plastic parts with skin lines on the surface, due to the bright skin lines generated by high temperature and high pressure, can solve the problem of requiring a matte surface.
4. Due to the close cooperation of the parting surface of the mold, the difficulty of opening the mold can be solved. It solves many problems that ejector pins, inserts, etc. can't provide enough surface area to accommodate a large amount of gas that may be generated, and avoids flash and other defects caused by parting surface or other exhaust systems.
5. It can solve and alleviate the difficult molding problems such as gate deviation, uneven wall thickness, thin wall products, etc.
6. The defects such as burning, flow marks, lack of materials and deformation of parts caused by suction caused by the gas generated by the high temperature of the molding material and the rapid pressure accumulation in the mold cavity can be fully solved. 7. Improve molding production efficiency and save production cost.
>>
Commercial Waste Plastic Shredder Granulator for Recycling
>>
Ck6180 Siemens Controller Turning Center CNC Lathe
>>
Custom Wood Bean Bag Toss Cornhole Games
>>
LC/UPC Type Optical Fiber Fast Connector
>>
Best Price Agricultural Machinery Parts Oil Bath Bearing Support Customization
>>
Pyrolysis Plant Can Recycling Waste Tire/Plastic/Rubbber and Convert Waste Tyre/Plastic to Carbon Black
>>
Pinzas rectangulares de TNC para conectores coaxiales rg213 rg214 rg216 rg8
>>
Factory Price ASTM A653 En10326 Dx51d SGCC G350 G550 Cold Rolled Metal Iron Zinc Coated Gi Sheet Hot Dipped Galvanized Steel Coil for Roofing Sheet
>>
Factory Customized 304 Stainless Steel Hot and Cold Kitchen Faucet Single Handle Sink Faucet with Spinning Function
>>
Efficient Lab Bio-Pharma Separator with Automatic Self-Cleaning Functionality
>>
4-Tier Chrome Wire Shelving Unit with Baskets, Wire Basket Shelf
>>
Mini Excavator with CE Excavator Parts Mini Excavator Equipment
>>
Hydraulic Press Brake/Sheet Bending Machine 200ton 6000mm Tp10s with Mechanical Crowning Table
>>
6 in 1 multifunction cavitation/RF/Microcurrent slimming machine/ultrasounic
>>
Shanghai Belling Digital Isolator BL7142WH
>>
Natural Lapis Lazuli Pigment Powder Mineral Pigment Made with Lapis Lazuli Stone
>>
High Efficiency Ultrafine Micrionpowder Separater Horizontal Air Classifier
>>
Liquid Nitrogen Container Cryogenic Storage Cell Tissue Samples Vaccine Embryo Yds-10
>>
Siemens Motor Power, 2150mm Rotor Length Tree Stump Mulching Mill
>>
Factory Supply Folding Packaging Magnetic Box Custom Rigid Gift Paper Box for Girlfriend Party Festivals
