Eton Manual Cup Sealer for Bubble Tea with Indonesia Cup Size Et-D8

Product Description

ETON Manual Cup Sealer for Bubble Tea with Indonesia Cup Size ET-D8

Basic parameters of products
Name:	Cup Sealer
Brands:	ETON
Model:	ET-D8
Size:	230X277X455mm
Power:	220V
Frequency:	50Hz
Output:	300W
Out put:	300~400cup/h
Packaging:	Carton
MOQ:	50

Through film:
1. Get the film to be confirmed film winding direction, counterclockwise to identify, and put the rod fixed film. (Turn off the power when wearing film)
2. Note whether the film around the splints and film closely, if you can not closely integrated utility knife will need to use film paper tube inside of the bevel cut again into.
3. After the film put the film firmly with tape posted on the receipt paper tube.
Sealing procedures (panel operating instructions):
1. Power, turn the power switch, indicator lights, the thermostat is set to a predetermined temperature, when the green heating indicator light. When the hot plate reaches a predetermined temperature, the red indicator light is constant (sealing machine at work, electric heating and insulation means constantly alternating states, so green and red lights are constantly alternating, this is normal).
2. The plastic cups were placed in the lower mold slide, slide his hands pushed into the die to determine the location, after touching the limit switch, the module automatically after receiving the signal under the pressure seal, reset automatically rise, touched on travel switch on mold motor stops. film motor begins to turn, turned a predetermined length film by electric eye controlling the motor stops automatically.
3. After the film must be the motor rotation, only pulled lower mold slide the plastic cup into the lower mold slide pushed into the next cycle begins.

Precautions:
1, take a good ground to ensure safe use of electricity.
2, when the machine fails, you should turn off the power, resume normal temperature before troubleshooting.
3, the use of the process must not hand into the upper and lower mold , so as not to crush or burns.
4, carrying cup push die movement, the die must be carried out at the highest point of stop motion.
5, template-carrying cup to a later innermost allowed rebound, or upper and lower mold will be damaged.
6, the working voltage must be maintained at 220V ± 5%.

---

>> Hot selling food additive vegetable carbon black pigment
>> BRC410 ABB DCS control cards
>> Zoomlion Tower Crane Mast Section 2.8M Block Type Tower Crane Spare Parts
>> 21 SFX 8X Fishing Braid 100%PE fishing line Premium Quality PE Braided Angling Line Custom
>> Electrostatic Powder Coating Machine System Equipment Production Line /Powder Coating Line
>> Dfaspo China High Quality Inflatable Drop Stitch Fishing Kayak 2 Person
>> High Production Henglong 12head Hlmjd-12c 2100mm Automatic Granite Marble Stone Polishing Machine
>> Wide Range Vision Accuracy Measurement Outer Dimensional Instrument Overall Diameter Measuring Machine
>> Yp-Ssms Non Woven Fabric Making Machine for Baby Diaper
>> DP-1600 bopp adhesive tape jumbo roll slitting rewinder machine packing
>> Rubber Sheet Pattern Cutting Machine
>> Full Range of Plywood Machinery Plywood Production Line
>> Kenya pp woven empty sack bag packaging tea 5kg with aluminum film laminated
>> Tapping Machine Grinder Magnetic Drill Spare Part
>> High Quality Mechanical Seal ptfe gland packing with oil or without oil
>> Stylish Japanese-Inspired Glass Mug Holder and Drink Coasters
>> Rxt30 Energy-Saving and Efficient Ultrafine Grinding Machine Can Crush Grains, Dry Fruits and Vegetables, Spices, Medicinal Materials and So on.
>> Sunhans High Gain 698-2700MHz WiFi 4G Mobile Signal Booster Outdoor Antenna
>> Boom Lift Winch with Exceptional Durability and Performance
>> Wholesale Blank Jogger Suit Designer Cotton Oversized Womens Tracksuit Set