|
US$2.10-3.00
|
1,000 kg
(MOQ)
|
Basic Info.
Application
Building Materials
Classification
Poly Addition
Main Agent Composition
Resin
Characteristic
High Adhesion Strength
Promoter Composition
Hardener
Curing Mechanism
Poly Addition
Density of Resin
1.50±0.05 G/Cm^3
Density of Hardener
1.2±0.05 G/ Cm^3
V Iscosity (After Mixing)
8000-10000 MPa.S
Mixing Ratio (by Weight)
5:1
Pot Life (23ºC)
50-80 Min
Open Time (23ºC, 50%Rh)
80-120 Min
Hardness Shore D
Approx 80
Shear Strength
≥10 MPa (Aluminum Alloy)
Flat Tension Strength
≥ 1.0 MPa
Transport Package
25kg+5kg Barrel
Specification
ISO9001, ISO14001
Production Capacity
30000 Tons/Year
Product Description
Description
Flexibond 8213/Flexibond 8200 is a two-component polyurethane adhesive which is applied for structural bonding for various substrates, such as aluminum honeycomb, wood, PU foam, polystyrene foam board, glass fiber-reinforced plastic, aluminum plate and steel plate, etc.
Characteristics
(1) Excellent adhesion to various substrates.
(2) Cures fast, shortens heat or cold setting time.
(3) Solvent free, environmental friendly.
(4) Good humidity and heat resistance.
Detailed Image
Technical Data Sheet of Flexibond 8213
| | Flexibond 8213 (Resin) | Flexibond 8200 (Hardener) |
| Curing mechanism | Poly addition |
| Chemical base | Multiplehydroxyl compound | PAPI |
| Color | White | Brown |
| The coloraftermixing | Light yellow |
| Density (beforecuring) | 1.50±0.05 g/cm3 | 1.2±0.05 g/cm3 |
| Viscosity | 25000-30000mpa | 250mpa.s |
| Viscosity (aftermixing) | 8000-10000mpa.s |
| Mixingratio (by weight) | 5 | 1 |
| Pot life | 50-80mins |
| Open time (50%RH) | 80-120mins |
| HardnessshoreD(GB/T 531-2008) | Approx 80 |
| Shear strength (GB/T 7124-2008) | ≥10 Mpa (Aluminum alloy) |
| Flat tension strength (GB/T 1452-2005) | ≥1 Mpa |
| Shelflife (unopened below 25) | 12months | 6months |
Application
(1) Adhesive Coating:
The recommended dosage is 200-400 g/m2. The dosage varies with the roughness of the substrate surface.
(2) Mixing Ratio
Flexibond 8213/Flexibond 8200=5: 1 (by weight)
The resin (8213) should be uniformly stirred before it is mixed with the hardener (8200). Mix the two components uniformly. Mix for 1-2 more minutes after the two components color is well mixed.
(3) Adhesive Coating Temperature:
The adhesion should be taken within its open time. The open time and curing speed will be affected if the temperature is too high or too low.
(4) Pressing:
Raise the pressing pressure as high as possible without affecting the material forming.
(5) Pressing time
The pressing time is 6-8 hours. The adhesive is fully cured in 7 days. The higher the temperature is, the faster the curing is. The pressing time can reach 30 mins under the temperature of 80.
(6) Clean
Recommended Cleaner: Acetone, butanone.
Packaging
Resin: 25kg/barrel
Hardener: 5kg/barrel
The packaging can be adjusted according to customer's requirement.
Note
(1) The adhesive sealant should be used up once mixed. The remaining sealant cannot be used if viscosity appears too large or its state is like jelly.
(2) Do not apply the product together with other adhesives. Please enquire to our technicians if you have such a need.
(3) The information and recommendations related to the application and end-use of COMENS' products are given in good faith based on COMENS' current knowledge and experience of the products when properly stored, handled and applied under normal conditions. This information must on no account be used as a substitute for necessary prior tests which alone can ensure that a product is suitable for a given use, due to the practical differences in materials, substrates and actual site conditions. Users are requested to check that they are in possession of the latest version of this documents and COMENS' is at their disposal to supply any additional information.
FAQ
>>
Cheap and fine used Komatsu PC220 excavators for sale
>>
Tested 3 ply surgical face mask disposable with earloop 50pcs/box
>>
Stainless Steel Entry Privacy Passage Hotel Round Deadbolt Ball Door Lock Brass 2.5 inch 3 5 2 Lever Master Key Knob Lock
>>
Industry Leading ODM One- Stop Yiwu Market Buying Agent with Quality Service
>>
Hot Sale Sweet Paprika Red Dry Pepper Chili Crushed with Visible Seeds
>>
Prepainted PPGI Coil PPGL Colour Coated Steel Sheet Bobina De Acero PPGI PPGI Steel Coil
>>
Movable Vertical Oil Tank Shell Shot Blasting Machine
>>
MAICTOP car exterior accessories body kit rear bumper for hilux revo 2016 factory price 52159-0K290
>>
Factory sell candle wax filling machine with stock price
>>
New Energy Vehicles Ev Charging Cable Type 1 Plug EV 16A/32A Car Charger SAE J1772
>>
Carton erecting mahine (two molds free)
>>
5MP USB2.0 Note Book Laptop Built-in Camera Modules
>>
3200mm Altendorf Structure Woodworking Machinery Sliding Table Panel Saw with Electric Lifting
>>
Mantle Eccentric Cone Crusher Manufacturers Stone Basalt Riverstone Crushing Plant Single Cylinder Cone Crusher for Sale
>>
GF260 Hot Sale Customized Bottle Pet Preform Injection Molding Machine
>>
Latest door design solid wood armored door indoor security door
>>
Reverse osmosis membrane shell magnetized Ro Pressure Vessels 8080 membrane shell
>>
Wholesale high quality Auto parts Regal LaCrosse Malibu XL car heater coolant pump For Chevrolet 13592753
>>
Versatile 2.0m Multifunction Rotary Tiller for Agricultural Tractors
>>
1 to 10 Targets CD DVD Blu-Ray Duplicator Machine