Basic Info.
Storage Medium
Moncombustible/Nontoxic
Pressure Level
Low Pressure (0.1MPa≤p<1.6MPa)
Manufacturer
Taizhou Tianyang Electrical Co., Ltd
Type
Heating Expansion Vessels for Heating Systems
Max. Flow Operating Temperature
120°c
Max. Vessel Operating Temperature
70°c
Max. Working Pressure
10 Bar
Factory Air Pre-Charge
1.9 Bar
Factory Pre-Charged Air
Nitrogen Gas
Connections Type
Bsp Male
Tank Shell Coating
Powder Epoxy
Diameter X Height
750X1500 mm
Transport Package
750X750X1500 mm
Specification
Foam Package
Trademark
Aqualeader/Dezhi
Production Capacity
200 Units Per Day
Product Description
Product Description
Basic Introduction
The pressure vessel is designed to provide a storage facility and pressure reservoir for water at temperatures up to 99ºC. Common uses are in water booster sets, heating pressurisation and fill sets. The vessel incorporates a replaceable Butyl diaphragm mounted in a mild steel shell. This method of construction eliminates any contact between the stored water and the steel shell of the vessel, and is therefore suitable for use with potable water. All units up to and including 25 litre sizes are suitable for a working pressure of 8 bar, larger vessels 10 bar, (except 1000LV)
For Water-Dezhi Series
Interchangeable membrane pressure tanks.
Membranes suitable for drinking water and can be installed to any type of pump.
WRc approved and built to 97/23/EC
Technical Parameter
Model | Tank Volume | Maxi Working Pressure | Diameter | Height | Connector | Package (Paper Box) | Export Packing Size |
x | Liter | Bar | mm | mm | Inch | cm | Non-fumigation wooden case/Or Pallet |
TY-04-5L | 5 | 10 | 160 | 300 | 1 | 17x17x31 |
TY-04-8L | 8 | 10 | 200 | 340 | 1 | 20x20x34 |
TY-04-12L | 12 | 10 | 270 | 350 | 1 | 27x27x35 |
TY-04-19L | 19 | 10 | 270 | 410 | 1 | 27x27x41 |
TY-04-24L | 24 | 10 | 270 | 460 | 1 | 27x27x46 |
TY-06-36L | 36 | 10 | 350 | 560 | 1 | 35x35x56 |
TY-06-50L | 50 | 10 | 350 | 830 | 1 | 35x35x83 |
TY-06-60L | 60 | 10 | 450 | 750 | 1 | 45x45x75 |
TY-06-80L | 80 | 10 | 450 | 890 | 1 | 45x45x89 |
TY-06-100L | 100 | 10 | 450 | 940 | 1 | 45x45x94 |
TY-06-150L | 150 | 10 | 450 | 1100 | 1 | 45x45x110 |
TY-07-180L | 180 | 10 | 560 | 1000 | 1 | 56x56x100 |
TY-07-200L | 200 | 10 | 650 | 970 | 1 | 65x65x97 |
TY-07-300L | 300 | 10 | 720 | 1260 | 1 | 72x72x126 |
TY-07-500L | 500 | 10 | 750 | 1500 | 1 | 75x75x150 |
TY-07-750L | 750 | 10 | 750 | 1800 | 1 | 75x75x180 |
TY-07-1000L | 1000 | 10 | 1000 | 1800 | 1 | 100x100x180 |
TY-07-1500L | 1500 | 10 | 1100 | 2000 | 1 | 110x110x200 |
TY-07-2000L | Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only) |
TY-08-8L | 8 | 10 | 240 | 330 | 1 | 25x25x34 |
TY-08-12L | 12 | 10 | 270 | 340 | 1 | 29.5x29.5x35 |
TY-08-19L | 19 | 10 | 410 | 290 | 1 | 29.5x29.5x41 |
TY-08-24L | 24 | 10 | 460 | 290 | 1 | 29.5x29.5x46 |
TY-08-36L | 36 | 10 | 380 | 490 | 1 | 38x38x50 |
TY-08-50L | 50 | 10 | 380 | 560 | 1 | 38x38x57 |
TY-08-60L | 60 | 10 | 480 | 490 | 1 | 48x48x50 |
TY-08-80L | 80 | 10 | 480 | 630 | 1 | 48x48x64 |
TY-08-100L | 100 | 10 | 480 | 720 | 1 | 48x48x73 |
TY-08-150L | Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only) |
TY-08-200L |
TY-08-250L |
TY-08-300L |
TY-08-400L |
TY-08-500L |
TY-08-600L |
TY-08-750L |
TY-08-1000L |
TY-08-1500L |
Regarding Installtion
The vessel is supplied pre-charged with air, but this pressure may require adjustment to suit the site conditions. This adjustment must be made with the vessel isolated from the system, and before filling with water. Air may be vented from, or pumped into, a patent valve which will be found under a black plastic screw-off cover on the shell (sizes up to and including 500 litre) or on a side mounted flange (750 and larger). It will be noted that vessels of 60 litre capacity or larger are manufactured with connections at either end of the vessel shell. The vessel should be mounted so that the system connection is made at the lowest possible point, to facilitate on-site maintenance. The other connection may be fitted either with a air bleed valve, or alternatively with a blanking plug. All pressure vessels should be installed with an isolating valve and drain cock.
Periodic Maintenance
The only maintenance required on this equipment is a periodic check on the air cushion pressure. It is necessary to isolate the vessel from the system, and to drain all water from the tank before making this measurement with a standard tyre pressure gauge from the valve.
Maintaince free models are also available,Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only) Company Profile
Taizhou Tianyang Electrical co.,LTD. Is located in Shangma industrial Zone,Shitang Town,Wenling City,Zhejiang Province,covering an area of 15,000 square meters.Our Company has over 30 years experience in mold design and exploition. "DEZHI"and "AQUALEADER" are our proprietary brand of our company.We have produced pressure tank for more than 20 years.Available volumes range from 0.5 to 1500 liters.and working pressure from 4 bar to 25bar. Our products are applied to pump systems .Our products are exported to numerous overseas clients.We can custom design and manufacture products according to client-supplied requirements.
We adhere to the business philosphy"Credibility,Quality and service",our scientific management is based on the domestic market, but facing to the world.Warmly welcome customers both domestic and from abroad.We sincerely hope to cooperate and develop together to create a better future.
Taizhou Tianyang Electrical Co.,Ltd. Is always your most loyal partner.
1.Q: What is your MOQ of this item?
A: We are a factory, have stock. 1PCS is ok!
2.Q: What is the delivery time?
A:35-45 days after receiving orginal L/C or deposit by TT.
3.Q: Is it all right to make customer's own brand name?
A: Yes we supply OEM service. Please send us a authorization doc.
4.Q: Where is your Loading Port?
A: Ningbo, Zhejiang, China.
5.Q: What are your payment terms? For Bulk Quantity Purchase
A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
For Samll amount Trial Order ,Please arrange the full payment
6.Q: What is your company's available production capacity?
A: 90000~120000 pieces of Pressure Tank per month
>>
Lipstick Bluetooth Earbuds Product_ID 990
>>
OEM 4 Axis Custom CNC Milling Turning 304, 316 Stainless Steel Metal Parts Prototyping Machining Services CNC Precision of Aluminum Parts
>>
For BMW F30 F10 F20 F22/23/44/F32/F33/36 MultiFunctional Full Leather Steering Wheel Assembly
>>
Paddy Rice Harvesting Machine Multi Crops Cutting Combine Harvester
>>
Auto Electric Shock strut Power Tailgate Lift Support Gas Struts For Bmw X3 G01 G08 F97 2018- Right OEM 51247397322
>>
High quality wholesale TRACKER TRAX car dash board For Chevrolet 26313295 26292640 26294086 26306230
>>
Automatic Adjustment Trimming Saw Machinefor Plywood Wood Board Saw Edge Cutting Saw
>>
BRAND NEW AFTERMARKET AUTOMOTIVE PARTS C CLASS W212 SPARE TIRE COMPARTMENT
>>
Laptop Case for MacBook iPad Tablet
>>
Wholesale Natural Plain Dyed Mulberry Silk Fabric Crepe for Women Clothing Silk
>>
New 10L (Single station & Single head with two layer & Toggle clamping & servo motor & High buffer movement cylinder) Blow Molding Machine
>>
Beetle Dining Chair
>>
Dolphin Whistle Candy Toy Candy
>>
Regular Fit Hoodie Heavyweight Cotton Summer Pullover Men Hoodie 2021 New Design Winter Hats Breathable Camouflage Custom
>>
Tidy up Tmr Feed Equitment for Farm Collect Tmr Feed Equiement
>>
Professional Factory Made Fruit Vegetable Industrial Tray Dryer
>>
Qizhi Hydraulic Flange Facing Machine
>>
Volvo Truck Second Hand Concrete Pump Truck 2020 Construction Equipment Concrete Machinery 67m Used Concrete Pump Truck
>>
SHAHE Portable 150 mm length 17 Blades Feeler Gauge Metric Feeler Gauge 0.02-1.00 mm Gap ruler
>>
8cm 3.1inch Indian Statues of Shiva Goddess Durga Statues Crystal Carved Gift Ornaments Tourist Souvenirs Wholesale