Product Details
Product Description
Product Description
Product Description
| Power supply |
|
| Battery | 4 x 12v 150 amp-hr |
| Charger | 27 amp High Frequency Charger |
|
|
|
| Basic specifications |
|
| Brake | Multi-Disc Friction (Hydraulic) |
| Capacity - Hydraulic Tank | 29.90 L / 7.9 gal. |
| Hydraulic pump | Fixed Displacement Gear |
| Vehicle weight | 3175.15 kg / 7000 lb |
| Self-respect | 9.59 Kg/cm2 / 137 psi |
|
|
|
| Performance parameters |
|
| Travel speed - platform raised | 0.80 km/h / 0.5 mph |
| Travel speed - platform lowered | 3.38 km/h / 2.1 mph |
| Drive System | Hydraulic Front Wheel |
| gradeability | 25% |
| Rise time | 80 sec. |
| Lower time | 41 sec. |
| Platform load | 349.27 kg / 770 lb |
| Platform load - extension | 113.40 kg / 250 lb |
| Platform load | 41in x 96in |
| Turning radius - outside | 2.54 m / 8 ft 4 in. |
|
|
|
| Dimensional data |
|
| Ground clearance | 0.13 m / 5 in. |
| Machine height | 2.54 m / 8 ft 4 in. |
| Machine height - folding rails | 1.91 m / 6 ft 3 in. |
| Machine length | 2.69 m / 8 ft 10 in. |
| Machine width | 1.14 m / 3 ft 9 in. |
| Platform extension length | 0.91 m / 3 ft |
| Platform height | 11.96 m / 39 ft 3 in. |
| Platform height - lowered | 1.4 m / 4 ft 7 in. |
| Platform height | 8.84 m / 29 ft |
| Platform railing height | 1.12 m / 3 ft 8 in. |
| Tire size | 16 X 5in |
| Wheelbase | 2.03 m / 6 ft 8 in. |
|
|
|
| Reach distance specification |
|
| Platform height | 11.96 m / 39 ft 3 in. |
| Platform height | 8.84 m / 29 ft |
| Working height | 13.79 m / 45 ft 3 in. |
The R series scissor aerial work platform has been completely redesigned from both the chassis and platform.
Including active dent protection system, simple arm design, thick tires and other configurations to ensure its success
A scissor aerial work platform that is more durable, easier to maintain, and more suitable for rental.
• Unique and wide tilt angle, different heights correspond to different tilt angles, suitable for multiple working conditions.
• Among products with the same operating height, R3246 has the lightest total weight and is the only one that uses unique single-lift oil
Products with cylinder design have fewer hydraulic oil pipes and joints, fewer leakage points, and low maintenance costs.
• Swing-out component compartment for easy maintenance.
• Low total cost of ownership thanks to lubrication-free parts.
• PHP uses a single piston rod and single-stroke switch, with a simple design, low component failure rate, and more economical maintenance.
• Suitable for both indoor and outdoor use with high stability.
• All use all-steel platforms and "parallel" fence designs, which are strong and durable.
• Most products (except R1932) adopt large 16x5-inch tires, which have strong spanning ability and are suitable for construction site applications.
It has a wider range of uses, which can increase the rental rate; the outer rubber is thicker, more wear-resistant, and can reduce maintenance costs.
• R4045 is a 12-meter height model, suitable for indoor and outdoor use, with 5 sets of scissor arms using a unique centerline
Design concept, with extra wide scissor arm span, small shaking, comfortable and safe operation.
>>
Airfoil stainless steel clothes rack dormitory portable small clothes rack with bay window platform
>>
Black DC Motor 6 Fan Speeds Dimmable 3 Color Ceiling Fan Light
>>
Car decorative strip Car door and window decoration suitable for Tesla MODEL Y threshold decorative strip 1494301-00-A
>>
fresh air dehumidifier equipped with compressor for house and basement
>>
8tpd Rubber Waste Process Plant Convert Rubber to Oil
>>
Short wave IR emitter halogen tube lamp system infrared bulb price quartz heater element quartz heaterinfrared heater bulbs 1500w quartz heater element
>>
80-100PCS/Min High-Speed Paper Cup Making Machine Fully Automatic Coffee Cup Making Machines
>>
Automatic Sheet Metal Feeder 3 in 1 Decoiler Straightener Feeder for Coil Power Press Lines
>>
Epson DX6 printhead
>>
D2 and H13 Tire, Rubber Polyretec Standard Wood Box Package Metal Plastic Shredder
>>
HC-S204 Medical 85CM Tall Human skeleton with nerve model for anatomical teaching
>>
Direct Yellow 24 Yellow Gr 100% CAS: 6486-29-9 Coloring Direct Dyestuff
>>
Bamboo Wooden Salt And Pepper Mill Set Ceramic Grinder Blades With Adjustable Coarseness For Cooking
>>
on sale skmei style 1514 big mens watches big wrist men dual time watches
>>
OEM CNC Machining Customization Services Stainless Steel Aluminum Threaded Parts CNC Machining Service
>>
Weatherproof - Outdoor Mail Box Anti-theft Design-Secure Parcel Box for Packages
>>
Custom printing Environmentally frie aluminum foil glossy Food packaging bags flat bottom stand up pouch for whey protein powder
>>
Anti Cut Level 5/D ANSI A5 13G HPPE Liner PU Coated Cut Resistant Knife Proof Gloves
>>
Lm Series Linear Guide Motion Slide Ball Bearing for CNC Parts Electronic Equipment
>>
New Fashion Design Waterproof Belt Bag for Women Customized Funny Pack
