Product Details
Product Description
Product Description
Brand: GE
Type: IS200SRTDH2ACB
Origin: the United States
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Module of PLC, DCS, ESD system card, the card is a vibration monitoring system, steam turbine control system module, the advantages of the gas generator spare parts brand: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts of our products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.
Press the “YES” key to enable this mode or the “Scroll Down Arrow” to step to the mode desired. (Refer to Figure 4-8). 6a. HP Valve to Min—Enabld, Min Curr Adjust * XXX.XX—Press YES to force the actuator output to the minimum stop. The message will display ‘At Min’ and the actuator output current will move to its minimum setting. The minimum current value can be adjusted only when the ‘at sign’ (@) is on the bottom line of the display. Press the SELECT key to move the @ symbol between the top and bottom lines. Press the ADJ UP or DOWN keys to change the 0% actuator current level. Press the SCROLL DOWN ARROW to step the next desired mode, or the “CLEAR” key twice to save changes, and exit Calibration mode. 6b. HP Valve to Max—Enabld, Max Curr Adjust * XXX.XX—Press YES to force the actuator output to the maximum stop. The message will display ‘At Max’ and the actuator output current will move to its maximum setting. The maximum current value can be adjusted only when the ‘at sign’ (@) is on the bottom line of the display. Press the SELECT key to move the @ symbol between the top and bottom lines. Press the ADJ UP or DOWN keys to change the 100% actuator current DOWN ARROW to step the next desired mode, or the “CLEAR” key twice to save changes and exit Calibration mode. 6c. Manually Adjust—Enabld, Stroke HP Valve XXX.XX—Press the ADJ UP, ADJ DOWN keys from this screen to move the HP valve’s output current between 0-100% at a 5%/second rate. This allows both the actuator and valve to be tested for binding, play, resolution, linearity, and repeatability. Press the “YES” key at any time to allow a setting to be directly Entered. The message will display ‘Manual’ when the ENTER mode is allowed. When in the ‘Manual’ mode, press the “ENTER” key, followed by the setting desired then press the “ENTER” key again. This will step the actuator output to a specific position instantly. Press the “ADJ UP/DOWN” or “No” keys at any time to switch back to the “Enabld” mode. When calibration is complete, 0 to 100% valve position as displayed by the 505E must equal 0 to 100% actual valve travel. Press the SCROLL DOWN ARROW to step the next desired mode, or the “CLEAR” key twice to save changes and exit Calibration mode. 6d. LP Valve to Min—Enabld, Min Curr Adjust * XXX.XX—Press YES to force the actuator output to the minimum stop.
The message will display ‘At Min’ and the actuator output current will move to its minimum setting. The minimum current value can be adjusted only when the ‘at sign’ (@) is on the bottom line of the display. Press the SELECT key to move the @ symbol between the top and bottom lines. Press the ADJ UP or DOWN keys to change the 0% actuator current level. Press the SCROLL DOWN ARROW to step the next desired mode, or the “CLEAR” key twice to save changes and exit Calibration mode. 6e. LP Valve to Max—Enabld, Max Curr Adjust * XXX.XX—Press YES to force the actuator output to the maximum stop. The message will display ‘At Max’ and the actuator output current will move to its maximum setting. The maximum current value can be adjusted only when the ‘at sign’ (@) is on the bottom line of the display. Press the SELECT key to move the @ symbol between the top and bottom lines. Press the ADJ UP or DOWN keys to change the 100% actuator current level. Press the DOWN ARROW to step the next desired mode, or the “CLEAR” key twice to save changes and exit Calibration mode.
>>
Different Models of Assembly Line Packing Roller Conveyor
>>
Easy to operate automatic liquid small vertical sachet packing machine shampoo sachet packing machine
>>
impeller
>>
Full Automatic Economical Press Wood Pallet Machine with High Load
>>
LDNIO SY-07 Micro USB Kabel Ronde Rubber Mobiele Telefoon USB Charger Data Sync Kabel voor Iphone Ipad iPod Samsung HTC LG Android
>>
Industrial automatic glass bottle washer and dryer cleaning washing drying machine
>>
Hot-Sale Promotion Wholesale Price14inch High Performance Laptop
>>
single channel Mango fruit pulp extractor machine vegetable and fruit Pulp making machine
>>
High Efficiency NMP Distillation System Machine for Battery Production Manufacturer
>>
Custom RPET Polyester Weekend Travel Luggage Gym Indoor Shoulder Sport Bag
>>
Vibrant Outdoor LED Festival Lantern Show with Custom Features for Gatherings
>>
Factory Price Dual xp600 convert parts for inkjet printer ( complete set)
>>
Aluminum Ceiling Design Interior Decoration False Ceiling Panel Decoration Baffle Sale Waterproof Honeycomb Cross Metal Sound
>>
High Efficient Silage Hay Cutter
>>
Manufacturer Supply SASO Certification 18000btu Split Air Conditioners 1.5 Ton
>>
Medical isolation eye mask - HAIDIKE eye protection products
>>
Ww-83102 High Quality Crash Helmet Motorcycle Parts
>>
Custom Eco Friendly Greaseproof Takeaway French Fries Sandwich Burger Fast Food Paper Packaging Microwave Popcorn Bag
>>
DS200TCCAG1BAA GE Gas turbine clamp of gas turbine system
>>
HC-R048 Semen Collection Device/ Cattle Sheep Semen Collection Device
