Product Description
Product Description
AS 5637.1 is a standard for determining the fire hazard characteristics of wall and ceiling linings. It is based on the results of the AS 3837 heat release rate test (small area method) or the ISO 9705 full-scale room combustion test (large area method) for grade assessment.
Generally, decorative materials are generally tested according to the Australian standard AS 3837 and then graded according to AS 5637.1AS3837-Reaction to Fire Test-Heat Release Rate Test Standard for Building Materials, while AS 3837 is a test method based on the heat release rate test standard ISO 5660. Except for the smoke test, other test methods and test equipment of the ISO test method are based on the ASTM E1354 standard, using an oxygen consumption calorimeter to test the heat release and visible smoke release of materials and products.
Test sample requirementsIf AS 3837 is used for testing, the sample must be 100mm×100mm×actual thickness (not exceeding 50mm).
Test itemsHeat release rate: Determined by oxygen consumption. The heat release rate of Group 1 materials during the test is low, and its peak and average values must meet the limits specified in the standard.
Effective heat of combustion value and material mass loss rate: Along with the heat release rate test, the mass loss rate of the sample is measured to calculate the effective heat of combustion value. The effective heat of combustion value and mass loss rate of Group 1 materials should be within a certain range.
Smoke release rate: The smoke release rate is determined by measuring the light shielding of the combustion products. The amount of smoke generated during the combustion of Group 1 materials is small and the smoke generation rate is low.
Flammability: The time from initial exposure to sustained combustion is measured. Group 1 materials have higher ignition difficulty and longer ignition delay period.
AS 5637.1 Procedure for the assessment of internal wall and ceiling linings(a) their tendency to burn;(b) their release of heat once ignited;(c) their tendency to cause flashover;(d) their tendency to release smoke; and(e) their contribution to the growth of a fire, and the determination of the number of groups, the smoke growth rate index (SMOGRARC) and, if required, the average specific extinguishing area (ASEA)
>>
Industrial Reverse Osmosis System Water Treatment Plant
>>
1260X840mm/1300X1000mm/1300X1100mm/1300X1200mm/1300X1300mm/1500X1300 Euro Pallet Customized Light Duty Plastic Pallet with Steel Reinforced
>>
China Heavy Truck Sinotruk HOWO T5g T7h Tx Truck Spare Parts WG7113450123+006/1 Roller
>>
60m3 LNG Storage Tank Cryogenic Liquid
>>
GSK High Efficiency Injection Pump for Reliable Plastic Injection Molding
>>
50KG Block Bottom Single side BOPP Laminated PP Woven Bags
>>
Cheap Price Mini Heavy Large Removing Construction Digger Excavator
>>
RF Coaxial connector BNC 5000V high voltage SHV male connector for cable RG58 RG59 RG6 cable connector
>>
Agricultural Tillage Rake Machine Klf-Xg160 Power Wheel Landscap Rotary Tiller Gearbox
>>
Rectangle Shape Brass Material Chrome Hand Shower (BF-N103)
>>
Hydraulic Press Brake, Folding Machine, Bending Machine, Plegadora Hidraulica / Dobladora Hidraulica with Esa Control System and Ce
>>
Stainless Steel Home Office Sewing Dressmaking Art Japan Tailor Scissors 11.5" Cutting Scissor
>>
4-inch Roll On Pressure Vessel 4040 RO Membrane Housing
>>
Free Samples Cut off Tshirt Tie Dye Tshirt Super Soft Tshirt
>>
CF598707: 16pcs 1/2" drive socket and ratchet handle set
>>
Wholesale Breathalyser Accurate Breath Alcohol Tester Pocket Breathalyzer
>>
Digital Concrete Resiliometer Rebound Hammer with OLCD Display HT225
>>
Promotional Pen Shape USB Flash Drives Case
>>
6m 8m 10m 12m Personal Lift Ladder Single One Mast Electric Lifting Aluminum Alloy Man Lift
>>
Popular Thick Chenille Sofa Couch Fabric Upholstery Cloth Decorated Material Furniture Fabric
