TK803V018

Product Details

Product Description

Product Description
Brand: ABB
Type:TK803V018
Origin: the Swiss
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Module of PLC, DCS, ESD system card, the card is a vibration monitoring system, steam turbine control system module, the advantages of the gas generator spare parts brand: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts of our products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.
MESSAGE 8 MEANING External Trip Input External Trip contact input was opened External Trip 2 External Trip #2 contact input was opened External Trip 3 External Trip #3 contact input was opened External Trip 4 External Trip #4 contact input was opened External Trip 5 External Trip #5 contact input was opened Emer Shutdown Button Emergency Shutdown on the 505E front panel was pressed Overspeed Turbine overspeed was sensed All Speed Probes Failed Loss of all speed probes was sensed Act #1 (HP) Fault Actuator #1 fault detected (an open or short circuit was sensed) Act #2 (LP) Fault Actuator #2 fault detected (an open or short circuit was sensed) Aux Input Failed Aux analog input failure detected ( > 22 mA or
gital Governor Manual 85018V1 178 Woodward Speed, Casc, Aux, and Ext/Adm Dynamics Adjustments Dynamic control values are programmed in the program mode and adjusted in the RUN mode. While in the run mode, pressing the DYN key calls up the dynamic adjustments of the parameter in control. The Proportional and Integral Gain dynamic adjustments are available under their respective keys (i.e. SPEED, CAS, AUX, & EXT/ADM).
The Derivative term adjustments are made in the Service Mode—(7-4 see volume 2). To adjust the gain settings, the @ symbol must be on the display line containing the asterisk/gain value to tune. The @ symbol is moved using the SELECT key. The ADJUST UP and DOWN keys can then be used to adjust the function on the line with the @ symbol. The Speed, Cascade, Auxiliary, and Extr/Adm controls are PID controllers. The response of each control loop can be adjusted by selecting the dynamics mode as described above. Proportional gain, integral gain (stability), and SDR (speed derivative ratio) are the adjustable and interacting parameters used to match the response of the control loop with the response of the system. They correspond to the P (proportional), I (integral), and D (derivative) terms, and are displayed by the 505E as follows: P = Proportional gain (%) I = Integral gain (%) D = Derivative (determined by SDR and I) NOTE If an older type 505E is being replaced by a new 505E, the “ P & D ” terms may be the same, however, the “ I ” term should be reduced by a factor of 10 from the old 505E’s reset value to achieve the same control response.

---

>> High Precision 32306(7606E) Single Row Grc15 Chrome Steel Taper Roller Bearing
>> Animal Feed Additive Betaine HCl 98% for Weight Gain
>> Large Colorful Supermarket/Grocery Store Trolley Shopping Cargo Cart Plastic Injection Mould
>> Wt-518 Mesh Apron Lattice Apron for Compact Spinning Machine
>> Auto Engine Parts Timing Chain Kit For MAZDA R2AA12500 R2AA11760B Tensioner TK7090-1
>> Tungsten Carbide Indexable Cutting Tools Aluminum Inserts Vcgt
>> 10%off 0.2-5mm Rigid Clear Plastic PVC Pet Film Sheet for Blister/Thermofoming/Vacuum Packaging/Printing
>> Custom Printed Moisture-Proof High-Quality Dog Cat Grain Food Flat Bottom Stand up Pouch with Resealable Zipper and Tear Notch
>> High Performance Hard Insulated Cooler Box 50L Capacity Coolers with Wheels
>> High-Volume Production High Rigidity High-Performance CNC Machining Center
>> Chinese 28FT FRP GRP Family Party Sloop Inland River Boat for Sale
>> Chinese Suppliers Fruits Vegetable Food Processing Drying Machine
>> CE 6m 8m 10m Single Mast Aluminum Aerial Platform Human Lift
>> MD-S853t Electronic Digital Temperature Switch
>> Infrared Picosecond Glass Laser Cutting Machine/Infrared Picosecond Laser Cutting Machine/Screen Protector Precision Laser Cut
>> KCMCO Spring Coiling Machine with 2 Axis KCT-8C for Steel Forming Machine & Airbag Gas Spring
>> Motorized Powder Coated Metal Gazebo Aluminum Louvered Roof Pergola Kits With LED Lights
>> Rvb Twin Parallel Flat Transparent Speaker Auido Wire Cable 1.0mm 1.5mm 2.5mm 4mm
>> Wooden Chairs Leg Make Machine, Auto CNC Double Side Copy Shaper Milling Machine-Mxs6232*250 for Furniture Production with Sanding Function
>> New!!! 3.5inch car rearview mirror dual view car camera RLDV-207