| US$68.88-92.00 | 10 pieces (MOQ) |
| Products | 3D Pro | 3D Prism | |
| Translucency | 43-57% | 43%-57% | |
| Description | The unique composition of raw materials together with the newly developed manufacturing technology GT (Gradient Technology), give the disc high mechanical strength and a seamless gradation of shade and translucency. The extensive spectrum of shades and the high flexibility of 3D & Prism complete the range.With this material it is possible to produce highly esthetic, monolithic, partially and fully veneered crowns as well as multiunit bridges. | ||
| Flexural Strength | 700-1050Mpa | 700-1200Mpa | |
| Shades | BL1, BL2, BL3, BL4, A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4 | ||
| Thickness | 12-25mm | 12-30mm | |
| Delivery Form | W-98mm Z-95mm D-71mm | ||
| Indications | - Veneer - Posterior and Anterior Crown - Full Crown Bridge(Up to 7-8Units) - Full Contour Screw Retained Bridge | - Veneer - Posterior and Anterior Crown - Full Crown Bridge - Full Contour Screw Retained Bridge - Full Arch Crown Bridge - Implant | |
| 3D pro Multilayer Sintering Program - Below 3 units bridge 7h | ||||||||||||||||
| start temp | phase 1 heating rate | phase 1 Maximum temp | holding time | phase 2 Maximum rate | phase 2 Maximum temp | holding time | cooling rate | cooling to | ||||||||
| 20 | 10/min | 900 | 20min | 5/min | 1500 | 120min | 10/min | 300 | ||||||||
