| Oxygen Free Electronic (C10100) |
| Physical properties : |
| Melting point | 1082.5 - 1083C |
| Electric conductivity | 100% I.A.C.S.@20C(68F) |
| Elasticity modulus | 17x10PSI |
| Rigidity modulus | 6.4x10PSI |
| Tensile strength | 42,000PSI |
| Yield strength | 36,000PSI |
| Rockwell B hardness | >40 |
| Characteristics : |
| Good formability |
| High thermal and electric conductivity |
| Corrosion resistance |
| Ease of welding |
| Good creep resistance |
| High ductility |
| Fabrication properties : |
| Technique | Suitability |
| Soldering | Excellent |
| Brazing | Excellent |
| Oxyacetylene welding | Fair |
| Gas shielded Arc welding | Good |
| Coated metal Arc welding | Not recommended |
| Spot weld | Not recommended |
| Seam weld | Not recommended |
| Butt weld | Good |
| Capacity for being cold worked | Excellent |
| Forgeability rating | 65 |
| Machinability rating | 20 |
| Typical uses : |
| Automotive rectifiers |
| X-ray tubes for mining |
| Electrical conductors for solar system |
| Busbars, Bus conductors, wave guides |
| Tubing, LP Gas service |
| Medical gas-oxygen |
| Vacuum seals, mode tube |
| Extrusion cans for powder metallurgy etc. |
| Common fabrication processes : |
| Blanking, Coining, Coppersmithing, Drawing, Etching, Shearing, Spinning |
| Forming and Bending |
| Heading and Upsetting |
| Hot forging and Pressing |
| Piercing and Punching |
| Roll threading and Knurling |
| Squeezing and Swaging |
| Stamping |
| For more info, please contact our representative |
