Turning Machine CM6241 Gap Bed Universal Metal Lathe for sale
1.Grinded and hardened guide way.
2.High precision bearings and grinded gears ensure high accuracy.
3.Low noise.
4.Monoblock cast iron base ensure good rigidity.
Max. swing over bed 410mmSpindle bore 52mmDistance between centers 1000/1500mm for choiceVariable speed is optional
| Model | CM6241x1000 | CM6241×1500 |
| Max. swing over bed | Φ410mm |
| Max. swing over cross slide | Φ255mm |
| Max. swing over gap | Φ580mm |
| Center height | 205mm |
| Distance between centers | 1000mm/1500mm |
| Width of bed | 250mm |
| Max.section of tool | 20mm×20mm |
| Max.travel of cross slide | 210mm |
| Max.travel of compound rese | 140mm |
| Spindle bore | Φ52mm |
| Spindle nose | D1-6 |
| Taper of spindle speed | M.T.#6 |
| Range of spindle speed | 16changes 45-1800r/min |
| Leadscrew pitch | 4 T.P.I. |
| Range of metric longitudinal feeds range | 0.05-1.7mm/rev(17 Nos) |
| Range of metric cross feeds | 0.025-0.85mm/rev (17 Nos) |
| Range of metric threads | 0.2-14mm(NO. 39) |
| Range of inch threads | 2-72 T.P.I.(NO. 45) |
| Range of Diametrical pitch | 8-44D.P.(21Nos) |
| Range of module pitches | 0.3-3.5 M.P.(18Nos) |
| Dia. of tailstock sleeve | 50mm |
| Travel of tailstock sleeve | 120mm |
| Morse taper of tailstock sleeve | M.T.#4 |
| Power of main motor | 2.2/3.3kw |
| Power of coolant pump | 120W / 3PH |
| Overall diamension(L*W*H) | (1000mm):1940×850×1320mm |
| (1500mm): 2440x850x1320mm |
| Packing size(L*W*H) | (1000mm):2070×926×1635mm |
| (1500mm):2575x926x1635mm |
| N.W/G.W | (1000mm): 1350/1550kg |
| (1500mm): 1550/1800kg |
