Innovative Eco-Friendly Silicone Sealant for Premium Building Solutions

Product Description

	Other product	Other product
Property	Unit	Result	Result
appearance		clear,white	clear
Uncured specific gravity	pas	1.08,1.56	1.08
Viscosity at 120°C (248°F)	wt%	>60	>60
Nonvolatile content	minutes	≥97.5	≥98.5
Open time2	days	20	15
Cure time, 3 mm bead³		<2	<2
Hardness - durometer Shore A	psi	55-65	55-65
Ultimate tensile strength		>600	>600
Ultimate elongation	%	>1200	>1200
Adhesion-in-peel strength	pli	>30	>30
Service temperature range	ºC(ºF)	-50 to 150 (-58 to 302)	-50 to 150 (-58 to 302)
Shear adhesion failure temperature	ºC(ºF)	> 300 (> 572)	> 300 (> 572)

Product Description Product Feature
1. Single component, easy to use, good extrudability and thixotropy in the temperature range of 4°C ~ 40°C, can be applied
directly by using a glue gun;
2. After curing, it will not become brittle, harden or crack at low temperatures of -30°C. It will not soften or degrade at high
temperatures, but will shrink to a certain extent and increase in hardness;
3. Excellent weathering resistance, aging, UV, ozone and water resistance;
4. Excellent resistance to high and low temperatures, will not become brittle, hardened or cracked at -30°C after curing, and will
not become soft and degraded at high temperatures, but there is a certain shrinkage, and the hardness has increased;
5. Good adhesion, forming a strong seal with most building materials when cured without the need for a primer;
6. Good compatibility with other neutral silicone adhesive
Instructions for use 1.Before construction, the glass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.
2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.
3.Adjustment should be completed within ten minutes after dispensing.
4.The product room temperature curing, surface drying time: 45Min, full curing time: 24h.
5.Application temperature range: -40ºC-+100ºC..

Storage 1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).
2.Construction temperature of 5-32 ºC is preferred.
3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.
4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.
5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.
6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.

---

>> High quality wholesale Regal Lacrosse Malibu XL XT4 car Front axle wheel suspension steering tie rod end For Chevrolet 23449526
>> Blackout film laminating machine for Curtain fabric
>> Hot Sale Carrot Harvesting machine Carrot Harvester machine
>> Hot Selling 500L Concrete Planetary Mixer 3000L Cement Mixer Concrete Machinery
>> Best price for white crystal exporting top quality Industrial Grade Agriculture Grade diammonium hydrogen phosphate (DAP)
>> Truck AC Unit Directly Install Parking Cooler Tz-PC6000
>> Pig Feed Mill Crumble Machine for Making Small Pellets
>> China Supplier Custom Logo Inverter 12000BTU Air Conditioner Inverter Split
>> Galvanized Steel Coil Galvalume Steel Coil for Building Material
>> 20inch Fat Electric Wheelchair Motor 36V 13ah 500W Handcycle Electric Wheelchair Conversion Kit for Disabled Wheelchair
>> High Precise Auto Axle Wheel Hub Bearing Hub Unit for RAV4 Chassis Part OEM 42410-42020 For Toyota
>> Auto air con blower fan motors VOLVO truck 20926019 20443822 20443820
>> Taijia ZC3-A Rebound Hammer Schmidt Concrete Test Hammer Rebound Hammer Test price
>> Meat and Bone Meal Production Line/Meat Bone Meal Machine/Meat Meal Poultry Waste Rendering
>> 58kHz 5X2.6X30 Am EAS Ferrite for EAS System (58634)
>> Factory Supply High Quality Milling X6232 Universal Swiveling Head Milling Machine
>> Green Life 1.8 Degree CNC High Torque 2 Phase 2 Phase 110mm 4 Wire NEMA 42 Stepper Motor for 3D Printer
>> New Style Newest Fashion Women's Cotton Tracksuit slim fit ladies' track suit for girl raining&Jogging suit
>> AC Three Phase Output Type Green Energy Water Cooled Syngas Power Generator
>> High Quality Silicone Rubber Raw Material Silica Rubber